Magewell USB Capture HDMI Plus

Description: Manufacturer Part Number: 32040 Input Interfaces HDMI DVI-D 1.0 HDMI 1.4 3.5mm audio jack Microphone interface Output Interfaces USB 3.0 compatible with USB 2.0 compatible with USB 3.1 Gen 1 3.5mm audio jack headphones interface HDMI HDMI loop-through interface Input Features Support for input video resolutions up to 40962160 HDMI Specific Features 297MHz HDMI receiver Adaptive HDMI equalizer support for cables lengths up to 30M Support for customized EDID Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames Full colorimetry support Support for up to 40962160 4:4:4/4:2:2 30fps or 40962160 4:2:0 60fps input signals For 4:2:0 input signals, the horizontal and vertical resolution will be reduced to 1/2 for capturing For 4:4:4/4:2:2 input signal at more than 170MHz, the horizontal resolution will be reduced to 1/2 for capturing Support for 2 channel IEC60958/IEC61937 audio streams Support for extraction of audio formation information and channel status data Support for extraction of video timing information Support for extraction of 3D format information Support for extraction of Sony/Canon DSLR time code Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode. Analog Audio Features Extract the embedded HDMI audio and output via 3.5mm headphones interface Capture analog audio via 3.5 mm microphone interface Integrate the functions of a USB audio card. Playback audio via 3.5 mm headphones interface. Support for recording the playback audio of the computer. Video Capture Format Support for capture resolutions up to 20481080 or 19201200 Support for output frame rates up to 60fps. (Actual output frame rate can be limited by the USB bandwidth. Support for YUY2 4:2:2 8-bit More capture format can be set using USB Capture Utility Video Processing Features Video processing pipelines with 160 Mpixels/s processing bandwidth Video cropping Video scaling Video de-interlacing Wave Blend top and bottom field Top field only Bottom field only Video aspect ratio conversion Auto or manual selection of input aspect ratio Auto or manual selection of output aspect ratio Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) Video color format conversion Auto or manual selection of input color format and quantization range Auto or manual selection of output color format, quantization range and saturation range Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats Support for Limited or Full quantization range Support for Limited, Full and Extended gamut saturation range Video frame rate conversion Multiple Devices on one computer Support for connecting multiple USB devices in one system Set the device serial number as the device name shown in the system using USB Capture Utility SDK USB Capture SDK provide functions including signal status extraction, capture configuration, etc. Firmware Upgrade Multiple devices in one system can be upgraded simultaneously LED Indicator Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed. Form Factor 98.1mm (L) x 56.8mm (W) x 17mm (H) Power Consumption 5V max current: 900mA max power consumption:~4.5W Working Environment Operating temperature: 0 to 50 deg C Storage temperature: -20 to 70 deg C Relative Humidity: 5% to 90% non-condensing

Price: 199 USD

Location: Milwaukee, Wisconsin

End Time: 2024-11-19T16:44:13.000Z

Shipping Cost: 0 USD