Maag Audio PREQ2 Dual Mic/Line/DI Preamp with EQ

Description: Two Channels of Mic/Line/DI Optimization! Housed in a sleek and rugged 1U chassis, the Maag Audio PREQ2 is a 2-channel mic/line/DI preamp/EQ that can input any analog signal and optimize it to achieve its maximum sonic potential. Equipped with two of Maag’s acclaimed mic preamps with a robust 71dB of gain, the PREQ2 can handle all your mic, line-level, and DI signals. But it also offers unique features such as buffered Pass Thru and proprietary level-match technology that facilitate re-amplification of mic and instrument signals, lackluster tracks, and even complete mixes through the PREQ2’s discrete Class A transformer-coupled circuitry and equalizer section featuring the legendary Air Band. All controls (with the exception of the continuously variable mic gain pot) are detented for easy settings logging and recall. The PREQ2 has caused quite a stir here at Sweetwater. It’s not only a powerful solution for euphonic enhancement and fine tuning, but Sweetwater is an Authorized Maag Audio Dealer Genuine Open Box Item Sweetwater's 2-year warranty Maag Audio PREQ2 Dual Mic/Line/DI Preamp with EQ 2-channel Mic/Line/DI Preamplifier/Equalizer with Re-amplification Capabilities, Variable HPF, Selectable LF Boost, and Air Band Two Channels of Mic/Line/DI Optimization! Housed in a sleek and rugged 1U chassis, the Maag Audio PREQ2 is a 2-channel mic/line/DI preamp/EQ that can input any analog signal and optimize it to achieve its maximum sonic potential. Equipped with two of Maag’s acclaimed mic preamps with a robust 71dB of gain, the PREQ2 can handle all your mic, line-level, and DI signals. But it also offers unique features such as buffered Pass Thru and proprietary level-match technology that facilitate re-amplification of mic and instrument signals, lackluster tracks, and even complete mixes through the PREQ2’s discrete Class A transformer-coupled circuitry and equalizer section featuring the legendary Air Band. All controls (with the exception of the continuously variable mic gain pot) are detented for easy settings logging and recall. The PREQ2 has caused quite a stir here at Sweetwater. It’s not only a powerful solution for euphonic enhancement and fine tuning, but it’s also a tremendous value. Put the Maag Audio PREQ2 to the test in your studio. You will be impressed.Microphone magic Fortified with 71dB of clean gain, the PREQ2’s mic preamps allow you to use any mic on any source. With the PREQ2, choosing a microphone to capture a specific source is a creative decision — not a technical one. No longer hampered by insufficient gain, you can now deploy that cherished passive ribbon mic on a quiet vocal or instrumental performance. For vintage-flavored “big-iron” sound, the preamps are spec’d with beefy, nickel-core transformers, custom designed and built by Maag Audio. Through the PREQ2, mic signals take on a commanding, larger-than-life authority, resulting in lively, full-bodied tracks that sit perfectly in the mix. These per-channel circuits deliver a pristine, stunningly detailed sound with a massive +27dBu of headroom and a vanishingly low EIN noise level of -128dB. You can select from two optimized gain ranges via the front-panel +25dB gain switch. Also included on the front panel are LED indicators and buttons for 48-volt phantom power, a 20dB pad, and polarity reverse, plus signal present and +26dBu peak LEDs.Line-level luminescence If you’ve ever over processed an uninspired track or entire mix in a failed attempted to breathe life into it, we have some good news for you: the Maag Audio PREQ2 is a fantastic re-amping tool that can revitalize any audio signal you send through it. Per-channel switches allow you to toggle between the rear-panel mic and line XLRs, so it is possible to keep both a microphone and a line-level source connected, one to each channel. A line source can be “re-preamped”: in other words, processed through the PREQ2’s amplification and EQ circuitry to inject vitality into it. Now, you may have noticed the per-channel pair of 1/4-inch TS jacks on the front panel — and they are key to a very unique feature of the PREQ2.DI and instrument/mic re-amping device The PREQ2 also functions as a traditional re-amp box. When an instrument is plugged into the Instrument Input of either channel, it is buffered and multed back out the Instrument Mic Thru jack at unity gain. This allows you to process the DI signal through the PREQ2; you can also route the signal out to, for instance, a guitar amp located in another room. Cool, but there’s more! You might be wondering why the Instrument Mic Thru jack is called that. Well, with just a microphone attached to the balanced XLR Mic input, that mic signal will be multed, amplified by +20dB, and routed out the 1⁄4-inch Instrument Mic Thru jack. This is an ingenious method of routing the mic signal to amplified speaker cabinets or stomp boxes without the need for additional interface devices. That the Thru jacks are active whether using DI or mic inputs multiplies your creative options exponentially. Well done, Maag Audio!Smart detection circuitry When using the instrument input TS jack, the PREQ2 uses an automatic detection circuit to flip a relay, lowering the impedance and routing the unbalanced 1/4-inch input signal to the mic input transformer. This smart detection circuitry not only allows your DI basses, guitars, keyboards, and synth modules to be infused with “big-iron” transformer muscle; it also makes it impossible for 48V phantom power to ever reach the 1/4-inch Instrument or XLR Line input, should you forget to switch it off.Unconventional and highly effective EQ The PREQ2’s EQ section sports an innovative 3-band configuration consisting of a highpass filter, a low-frequency boost, and Maag Audio’s proprietary Air Band. It may be an unconventional arrangement, but it works amazingly well for quick tonal touch-ups and fine tuning. The 12dB/octave HP filter is frequency selectable in 21 steps on its detented rotary switch. Next, the low-frequency band offers 9dB of boost (only) and is frequency selectable via a 6-position rotary starting with a 6dB/octave 10Hz shelf (“Sub”), followed by bell curves centered at 40Hz, 65Hz, 100Hz, 125Hz, and 165Hz. Lastly, we come to the Air Band.The legendary Air Band It was 1993 when Cliff Maag rocked the pro audio world with his NTI EQ3, which introduced the Air Band. Regarded to this day as one of the most musical EQs on the planet, the EQ3 has gone on to inspire three decades of Maag Audio EQs. The Air Band has garnered legions of fans over the years and is perfect for adding a vivacious, glistening sheen to a vast range of program material. Incorporating the Air Band into a supremely musical EQ section, the PREQ2 becomes a formidable studio tool that lets you intuitively tune any program material by ear. The PREQ2’s Air Band offers up to 9dB of shelving boost at 2.5, 5, 10, 15, 20, and 40kHz and shares a single hardwired bypass with the LF section. Meticulously crafted in the USA, the Maag Audio PREQ2 is built to serve you reliably — session after session, year after year. Add one (or more) to your rack and hear what you’ve been missing!Maag Audio PREQ2 Dual Mic/Line/DI Preamp with EQ Features: Discrete Class A transformer-coupled preamp with re-amplification capabilities Ideal for recording and mixing, tonal touch ups, and euphonic enhancement Mic input transformer tuned for clarity, detail, and pristine transparency 70dB of gain handles even your lowest-output microphones Dual optimized gain ranges (Low: +20dB to +42dB; High: +42dB to +71dB) All controls detented, except for continuously variable mic gain Front-panel DI input designed to receive signals from a wide range of instruments/sources Highpass filter, variable from 20Hz–200Hz LF: up to 9dB of boost; selectable 10Hz shelf; 40Hz, 65Hz, 100Hz, 125Hz, and 165Hz bell curves) Includes the legendary Air Band shelf boost heard on countless iconic recordings Front-panel Instrument Mic Thru jacks mult DI or mic signals for connection to guitar amps, FX pedals, etc. Green signal present LED, red Peak LED lights at +26dBu Switchable 20dB pad, green LED indicator Switchable 48V phantom power, red LED indicator Phase switch: reverses the polarity of the balanced output Rear-panel per-channel balanced XLR mic and line inputs Rear-panel per-channel balanced XLR line outputs Internal power supply; rear-panel IEC mains socket Rear-panel mains selector (115V/230V) Quality crafted in the USA SpecificationDetail Preamp Type Solid State Number of Channels 2 Phantom Power 48V Pads -20dB EQ 3-band EQ Analog Inputs 4 x XLR, 2 x 1/4" Analog Outputs 2 x XLR, 2 x 1/4"(Thru) Rack Spaces 1U Power Source Standard IEC AC cable Height 1.75" Width 19" RETURN INFORMATION We want you to be completely happy with your purchase from Sweetwater. If you are not satisfied with your product, you may return it for a refund of the purchase price within 30 days. If your purchase was eligible for Free Shipping, the shipping cost will be deducted from your credit or refund. Returns must be in the complete and original packaging with all accessories and complete documentation (Owner's Manual, warranty card, quick start guides, etc.), show no signs of wear or use, and include a Return Authorization number or be subject to a restocking fee. Fast, FREE Shipping! Nearly every order received by 3PM Eastern ships the SAME DAY! FREE shipping to lower 48 states. Our central location reaches most states in 1-4 business days 99.95% warehouse accuracy We are proud to provide some of the fastest turnaround times on eBay. We use FedEx or UPS for most items, and USPS for smaller items. Residents of Hawaii, Alaska, and Puerto Rico should contact us for a shipping quote. PLEASE NOTE: We cannot ship large items to PO boxes, please provide an alternate address. If you have questions, feel free to contact us. Buy with confidence! Sweetwater's been selling on eBay since 2001, with 99.9% positive feedback! More than 30 years in business World-class customer service Fast, FREE shipping Free 2-year warranty on nearly every product Free tech support from audio experts

Price: 1868.4 USD

Location: Fort Wayne, Indiana

End Time: 2024-12-02T05:50:44.000Z

Shipping Cost: 0 USD