M-AUDIO PROFIRE 610 used

Description: Great audio interface for someone with an older PC or looking to directly replace theirs that may have gone bad. Features Up to 24-bit/192kHz for high-definition audioFlexible onboard DSP mixer2 preamps with award-winning M-Audio Octane™ technologyPhantom Power20dB pad on each preampSignal/peak LED indicator lights 6 inputs including:2 XLR/TS combo jacks for mics or instrument level inputs2 ¼” TRS balanced line inputsStereo S/PDIF in 10 outputs including:8 ¼” TRS balanced line outsStereo S/PDIF out 2 ¼” TRS headphone outputsBuilt-in 1 x 1 MIDI interface2 FireWire (IEEE 1394) portsJetPLL jitter elimination technologyStandalone operation as 2 mic pre/2-channel A/D-D/A converterUser-assignable master volume knobPowered via FireWire bus or external power supplyHalf-rack-space form factor fits in Universal Rack TrayCompatible with major audio software including Pro Tools*, Cubase, Logic, Sonar, Live and GarageBand Specifications Line Inputs (Balanced)Frequency Response:+/- 0.1dB, 20Hz to 22kHz, +/- 0.2dB, 20Hz to 80kHz (192kHz)Signal-to-Noise Ratio:-108dB (A-weighted)Dynamic Range:108dB (A-weighted)THD+N:0.002% (-94dB), 1kHz, -1dBFSCrosstalk:<-110dB @ 1kHzMaximum Input level:+16.1dBu, typicalInput Impedance:>20k ohm, balanced Mic Inputs (Balanced) At Min Gain, No PadFrequency Response:+/- 0.2dB, 20Hz to 22kHzSignal-to-Noise Ratio (min gain, no pad):-108dB (A-weighted)Dynamic Range (min gain, no pad):108dB (A-weighted)THD+N (min gain, no pad):0.0022% (-93dB) @ -1dBFS, 1kHzCrosstalk:< -110dB @ 1kHzMaximum Input level:from +28dBu @ min gain, pad on to -45dBu @ maxgain, no padInput Impedance:3.7k ohms, balanced, no padAdjustable Gain:>53dB without padPad:-20dB Inst. Inputs (Unbalanced) At Min Gain, No PadFrequency Response:+/- 0.2dB, 20Hz to 22kHzSignal-to-Noise Ratio (min gain, no pad):107dB (A-weighted)Dynamic Range (min gain, no pad):107dB (A-weighted)THD+N (min gain, no pad):0.0025% (-92dB), 1kHz, -1dBFSCrosstalk:< -110dB @ 1kHzMaximum Input level:from +14.5dBV @ min gain, no pad to -39dBV @ maxgain, no padInput Impedance:1M Ohm unbalancedAdjustable Gain:>53dB without pad Line Outputs (Balanced)Frequency Response:+/- 0.1dB, 20Hz to 22kHz+/- 0.2dB, 20Hz to 80kHz (192kHz)Signal-to-Noise Ratio:-108dB (A-weighted)Dynamic Range:108dB (A-weighted)THD+N:0.0016% (-96dB) @ -1dBFS, 1kHzCrosstalk:< -105dB @ 1kHzMaximum Output Level:+15.9dBu balanced, typicalOutput Impedance:940 ohm balanced Headphone Outputs at Maximum Volume into 32 ohm LoadFrequency Response:+/- 0.1dB, 20Hz to 22kHzSignal-to-Noise Ratio:-108dB (A-weighted)Dynamic Range:108dB (A-weighted)THD+Noise:0.003% (-90.0dB), 1kHz, -1dBFSMax Output Level into 32 ohms:+2.9dBV, typicalPower into Ohms:60 mW into 32 ohmsOutput Impedance:75 ohmLoad Impedance:24 to 600 ohmsCrosstalk:<-75dB @ 1kHz *Typical measurements at 48kHz sample rate unless otherwise stated. Requirements CompatibilityASIOWDM/MME/DirectXCore Audio/Core MIDIPro Tools M-Powered Minimum System Requirements (PC)FireWire 400 (IEEE 1394a) portWindows XP (SP2) / Windows Vista* 32-bit (SP1) / Windows Vista SP2 (32Bit , 64 Bit) / Win7 (32Bit , 64 Bit)Pentium 4, 1GHz, 512MB RAM*1GB RAM required for Windows Vista. M-Audio recommends that you check your software’s minimum system requirements as they may be higher. Minimum System Requirements (Mac)Mac OS X 10.6.8 to 10.8.4Macintosh Intel processor2Gb RAM (4GB recommended)FireWire 400 (IEEE 1394a) port

Price: 40 USD

Location: Sacramento, California

End Time: 2024-10-22T21:41:16.000Z

Shipping Cost: N/A USD