Description: SH Scientific offers quality and budget-saving 1050 ℃ to 1800 ℃ muffle furnaces for material analysis, heat treatment and innovation in the area of water, soil, ceramic, metal, alloy, plastic and battery material.SH Scientific’s economic muffle furnace MGE series goes up to max 1050 degrees Celsius (℃) and the ideal operating temperature is 900 degrees Celsius (℃) and below.If your testing is carried out under this temperature in any case, do not overpay for standard design. This economic muffle furnace is designed for your budget-saving.Our MGE series are the most affordable quality muffle furnace in the market. Save your budget. Our muffle furnace takes less than 40min to reach 800℃.SH Scientific muffle furnaces are ideal for wide range of application including combustion, ash analysis, calcination, reduction, oxidation, dissociation, sintering, pyrolysis, reaction, hardening and tempering, melting, thermocouple calibration, annealing, stress relieving and etc.5L chamber (L150xD260xH130mm)Economic muffle furnace with flap door- General laboratory and research useRecommended ideal running temperature is below 850℃Heating from 3 sidesExcellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymerSingle housingCeramic fiber materials which are not classified as carcinogenicLight weightPrompt heat up and good maintainingSSR operation and PID control provides low noise operation and precise temp control (+/-1℃) ModelSH-FU-5MGEMax temperature1050℃Continuous running temperature900℃ and belowChamber volume5litersControllerDigital PID controllerSensorK typeHeater1.5kWHeating elementKANTAL A-1 with ceramic fiberInsulationCeramicPower supply110V, 50/60Hz, 1p, 14ANet weight22kgChamber size150x260x130mmExternal size320x430x430mmHERE ARE OUR PROUD SUPPLY REFERENCE OF SH SCIENTIFIC FURNACE FOR CUSTOMERS AND INDUSTRIES.a. Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.b. Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.c. Material technology providers who develop polymer composites and graphene materials.d. Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.e. Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.f. Material innovation companies who do sintering in vacuum or in inert gases.g. Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.h. Analytical research labs who perform various material testing with thermal treatment.i. Medical implants manufacturers who anneal alloy powders.j. Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.k. Applied science engineers who process solid oxide fuel cells (SOFC).l. Environmental and chemical researchers who need combustion of materials.m. Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.n. Metallic parts manufacturers who need vacuum brazing and heat treating for steel.o. Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.p. Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.q. Engineering companies who do curing and sintering solutions in porous ceramic tubes.r. Civil engineers who need soil combustion.s. University labs who anneal Si wafer in vacuum condition.t. Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.u. Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).v. Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnacew. Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.
Price: 1670 USD
Location: Compton, California
End Time: 2024-10-25T15:42:36.000Z
Shipping Cost: 250 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Return policy details:
Modified Item: No
MPN: SH-FU-5MGE
Country/Region of Manufacture: Korea, Republic of
Custom Bundle: No
Brand: SH Scientific
Intended Use/Discipline: Ashing and sintering, lab furnace, Muffle furnace, Laboratory furnace, Metallurgy, Metal injection molding and ceramic injection mold, medical implants manufacturing, Annealing and combustion, 3D printing and densification, Metal softening
Furnace/Oven Type: Lab Furnace
