Kwikset KW1/Weiser WR6 Keys Cut by Code OR Random Key 5-pin

Description: See options: 1. Random code (2 keys): To be used by those who wish to re-pin their locks with access to a re-pinning kit or a cylinder that uses Kwikset/Smartkey. 2. Code cutting (2 keys): Keys will be cut to the bitting you specify. You can find the bitting of a key by the following ways:a. If the bitting is marked on the keys, it will be a 5 digit number for KW1/WR6. Note, numbers on the key don't necessarily represent the bitting. You can verify the validity by looking at the key from bow to tip. For example, if the marked code is 64332, the first cut will be deeper than the second cut. The third cut will slightly shallower than the second cut, and the forth cut will be the same depth as the third cut and so forth. b. By measuring the depth of each cut read from bow to tip with a set of calipers. See pic with Mitutoyo caliper. You would need to measure each cut with the caliper and read the Kwikset key diagram for the correct depth number. The Mitutoyo caliper in the pic reads "0.329in". The corresponding depth number will be "1" as found in the root depth table. Note: If you're measuring a key cut with a key duplicator, there will be a larger variance in the measured depth than the factory original key, or a proper code cutter like the Pro-Lok blue punch. By default, the bitting will be engraved onto the key unless otherwise specified. Note: Cut keys will be cut on a Pro-Lok Blue Punch. There are 2 style of blanks available for KW1/WR6. Both are interchangeable on newer locks, but note KW1 blanks has had minor changes over the years after Weiser merged with Kwikset.

Price: 8 USD

Location: Niagara Falls, New York

End Time: 2024-10-10T02:52:17.000Z

Shipping Cost: N/A USD