KIT Electronic Hourglass With 57 LED Animated 5V DC Adjustable Speed

Description: KIT Electronic Hourglass With 57 LED Animated 5V DC Adjustable Speed The description of this item has been automatically translated. If you have any questions, please feel free to contact us. KIT Electronic hourglass with 57 animated LEDs 5V DC adjustable speed MANUFACTURER: F.Elettronica REFERENCE: HOURGLASSDRAKIT EAN CODE: Electronic hourglass kit made up of 57 blue light LEDs. It marks the passage of time, simulating the flow of sand in a traditional hourglass, with the switching on of one LED at a time. Attention, the product is a KIT and therefore you will be given the components to be soldered with an electronics soldering iron and everything needed to recreate the device as shown in the image. The KIT includes easy-to-understand illustrated instructions in English. EXPERIENCE LEVEL NECESSARY medium-low Assembly and testing by Mectronica STORE is also available by adding quantity 10 of the KIT assembly service which can be purchased by clicking here on EBAY | MECTRONICA STORE and adding it to the cart together with the KIT to be assembled. VIDEO OF OPERATION Electronic hourglass kit made up of 57 blue light LEDs. It marks the passage of time, simulating the flow of sand in a traditional hourglass, with the switching on of one LED at a time. All managed by a microcontroller. A button allows you to increase or decrease the speed with each press. Power supply: 5 VDC, dimensions (mm): 84x40x10. Assembly and Use To assemble the kit, it is recommended to proceed from the components having the smallest thickness, therefore proceed by assembling the base paying attention to the polarity. Then proceed with the slide switch, the button and then the LEDs. As for the LEDs, even in this case the polarity is very important, so make sure that it is correct, since if it were reversed, during operation, some LEDs may not light up correctly. L1÷L57: 3 mm blue LED U1: 8+8 socket with STC15W201S on board S1: Slide switch S2: Microswitch DC1: Power plug ISP: 4-way male strip Once assembly is complete, supply power (5Vdc) to the product via the connector DC1 (central positive), or by soldering two wires to the two pads located between the DC1 connector and the S1 switch (holding the DC1 connector on the right, the pad on the left is the positive, while the one on the right is the negative). If the device does not turn on, check that you have placed the slide switch S1 in the ON position. The S2 button can be used to vary the passage of time. Electronic hourglass kit consisting of 57 blue light LEDs. It marks the passage of time, simulating the flow of sand of a traditional hourglass, with the lighting of one LED at a time. All managed by a microcontroller. A button allows, each press, to increase or decrease the speed. Power supply: 5 VDC, dimensions (mm): 84x40x10. Assembly and Use In order to assemble the kit, it is advisable to proceed from the components with the least thickness, therefore proceed by mounting the base, paying attention to the polarity. Then proceed with the slide switch, the button and then the LEDs. As for the LEDs, polarity is also very important in this case, so make sure it is correct, as if it were reversed during operation, some LEDs may not light up correctly. • L1 ÷ L57: 3 mm blue LED • U1: 8 + 8 socket with STC15W201S on board • S1: Slide switch • S2: Microswitch • DC1: Power plug • ISP: 4-way male strip After assembly, supply power (5Vdc) to the product via the DC1 connector (central positive), or by welding two wires to the two pads located between the DC1 connector and the S1 switch (keeping the DC1 connector on the right, the pad on the left is the positive, while the one on the right is negative). If the device does not turn on, check that the slide switch S1 is in the ON position. The S2 button can be used to vary the passage of time. Why Mectronics STORE? All products are shipped via the best national couriers such as SDA, GLS, Poste Italiane, BRT and DHL. To facilitate delivery, you will be asked for your telephone number during the order phase, allowing the courier to contact you in the event of any problems or eventualities during delivery. For any delivery needs you can contact us. ALL SHIPMENTS ARE 100% TRACEABLE Not at home during the day? We have the possibility of delivering to the post office near your home or to a Puntoposte! Write the delivery point in the address. PAYMENT Credit cards are also accepted with transactions always made on the secure payment site PayPal. No information about your payment method is shared with us to ensure maximum security. A REGULAR TAX INVOICE IS ISSUED FOR THE PRODUCTS SOLD IF REQUESTED AT THE TIME OF PURCHASE. WITHDRAWAL AND WARRANTY All our products are guaranteed both upon delivery and during the time of use. For products that are originally defective, we will replace the product free of charge. The warranty lasts 2 years for private individuals and 1 year for companies/businesses. Remember to keep the sales invoice and the original product packaging with all accessories! If you are not satisfied with a product, you have 30 days to withdraw from the purchase and receive a refund for the purchase of the product. TECHNICAL ASSISTANCE What sets us apart from other sellers? We are an electronics company with technicians dedicated to solving your doubts or problems with our products. No waiting on the phone or call center: you can contact us by phone, whatsapp, email or fax, the references can be found at the bottom of the page. Our experience is at your service to help you choose and use the products on sale. FEEDBACK Feedback is important to us and to you. Therefore we ask you to report any problem in the purchase and to contact us before leaving negative or neutral feedback. Remember to put 5 stars in your feedback if possible in all fields to always guarantee the service we offer. As you can see, the way to contact us is clear and simple, to quickly solve all problems with our products. ELECTRONICS - HOME AUTOMATION - REMOTE CONTROL - AUTOMATION AND MECHANICS - SOFTWARE CREATIONS Prestalia e-commerce solutions. Attention, the product is a KIT and therefore you will be given the components to be soldered with an electronics soldering iron and everything needed to recreate the device as shown in the image. The KIT includes easy-to-understand illustrated instructions in English. EXPERIENCE LEVEL NECESSARY medium-low Assembly and testing by Mectronica STORE is also available by adding quantity 10 of the KIT assembly service which can be purchased by clicking here on EBAY | MECTRONICA STORE and adding it to the cart together with the KIT to be assembled. VIDEO OF OPERATION Electronic hourglass kit made up of 57 blue light LEDs. It marks the passage of time, simulating the flow of sand in a traditional hourglass, with the switching on of one LED at a time. All managed by a microcontroller. A button all MPN CLESSIDRAKIT Marca F.Elettronica EAN Non applicabile

Price: 87.04 USD

Location: Bagno di Piano

End Time: 2025-01-16T13:51:02.000Z

Shipping Cost: 0 USD