keyless remote entry Avital FCC EZSDEI471H control fob RPN 7111A clicker keyfob

Description: Why purchase a recycled keyless entry remote transmitter? The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today! Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #. What are you purchasing? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system. Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below. Manufacturer DEI Directed Electronics Inc Viper Pythoon Your Valet Auto-Mate DEI – Directed Electronics – VIPER- Python – Auto-Mate – Rattler – SideWinder – Hornet – Merlin – Avital - Ungo Compatible FCC ID#(s): FCC ID EZSDEI471H EZSDEI7111L EZSDEI7111A EZSDEI7111 EZSDEI471 EZSDEI471H Alternate Spellings EZS-DEI471, EZS DEI471, EZSDEI471, EZSDEI47I, EZSDE1471, EZ5DEI471 DEI Headquarters, Inc. Automobile Security System DEI471 Part #(s) 7111L or 7111A or 7111H or 7111A Dealer #(s) Button Count: 1 Battery (installed): 1: CR2032 Frequency: 433 - 434 MHz LED Light Color: Green Circuit board #s: DT7H(A) DT0C #s on Chip on board: Condition Notes: Pre-Owned; ready to program Compatible Aftermarket Installed Systems: AVITAL 4111 AVITAL 4113 Programming: Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop. 1) Turn the ignition to the ON position. 2) Within 10 seconds, press & release the program switch the number of times corresponding to the desired channel listed next. Once you have selected the channel, press the switch once more and hold it. The LED will flash to confirm the selected channel. Do not release the program switch. 3) Channels: - Channel 1: Auto Learn Standard Configuration (default) - Channel 2: Delete remotes: This feature erases all remotes from the memory of the security system. This is useful in cases when a customer’s remote is lost or stolen. Note: This does not reset the programmed features of the security system or reset the Virtual Tach setting. - Channel 3: Reset Features: This resets features all of the security system to the factory default settings. Note: This feature does not delete the remotes from the security system or reset the Virtual Tach setting. - Channel 4: Virtual Tach Reset: Deletes all previously learned values for Virtual Tach, and on the next remote start sequence the unit begins virtual tach initialization. Note: The “Zap” feature on the Bitwriter does not reset the Virtual tach setting. 4) While Holding the Program switch, press the button on the transmitter that you would like to control the selected receiver channel. 5) Once the code is learned, the Program switch can be released. You can advance from programming one channel to another by releasing the Program switch and tapping it to advance steps and then holding it. For instance: You have programmed Channel One and you want to program Channel Two. Release the Program switch. Press it one time and release it to advance from Channel One to Channel Two. Now, press and hold the Program switch. The LED will flash two times. As before, do not release it. If you want to program Channel Three after programming Channel One, release the Program switch, press it twice and release it to advance to Channel Three. Then press it once more and hold it. The LED will flash three times to confirm it is ready to receive the code from the transmitter. 6) Exiting programming mode: - Ignition is turned off. - Program switch is pressed too many times. - More than 25 seconds elapses between programming steps. Why does your vehicles installed RKE / Security system determine which remote control your can purchase? The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system. Programming: We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer. Programming Requirement Information NOTE: The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions: 1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems. 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence. To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following: i. If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote) ii. If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?) 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand. 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems). 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems). 6. There are also many auto forums that you can go onto by just conducting a google search with your questions. 7. or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer Normal 0 false false false EN-US X-NONE X-NONE

Price: 27.86 USD

Location: Wellsboro, Pennsylvania

End Time: 2025-01-21T17:29:56.000Z

Shipping Cost: 6.96 USD