Description: Product Overview The K-Array KA24 is an all-in-one KA amplifier and processing solution. It features 4 channels per 500W on 4 Ohm. The KA24 also has 4 fully independent and configurable channels. The KA24 can be used as a mixer for fixed installations because it has the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories. K-Array KA24 Features: 2000W in 2 rack units 4 analog IN and 2 AES-EBU IN to 4 fully configurable OUT 2 GPIO for external analog controls Integrated DSP with processing, matrix and delays Onboard touch screen for easy access functions Mic IN and 48V option on all IN for mixer application K-Array KA24 Specifications: Power Output: Max Power @ 4 Ohms: 4 x 600 W Max Power @ 8 Ohms: 4 x 300 W Max Power bridged @ 8 Ohms: 2 x 1200 W Minimum impedance: 4 Ohms (single channel mode), 8 Ohms (bridge mode) Audio Specs: Distortion (THD + N): < 0.09% 1W to full power @ 4 Ohms (typically < 0.05 %) Input impedance: 10 k Ohms balanced Gain: 26 dB Output: Unbalanced to ground Bandwidth: 20 Hz - 20 kHz (+/- 1 dB) Damping factor: > 10000 @ 100 Hz Protection: Thermal: Yes Short circuit / over-load: Yes Clip limit, Analog signal limit: Yes Audio Input: Analog Connectors: 4 male + 4 female 3-pin balanced XLR Digital Connectors: 1 male + 1 female 3-pin XLR Remote control Input: Connectors: 1 male and 1 female XLR parallel / 1 USB B Jack serial converter Audio powered Output: Connectors: 2 x 4-pin Speakon NL4 AC power: Connector: 2 x PowerCon IN/OUT Nominal voltage: 100 - 240 V, 50/60 Hz with PFC Operating Range: AC 90 - 264 V Efficiency: > 79 % (typical) 1/8 rated power (pink noise)@ 8Ohms: 440 VA Certification: IP: 20 Physical: Dimensions: 17" x 12" x 4 (430 x 295 x 94 mm) Weight: 12.12 lbs (5.5 kg)
Price: 1250 USD
Location: Miami, Florida
End Time: 2024-10-12T21:11:22.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: K-ARRAY
Model: K-ARRAY KA24
MPN: N/A
