Julldent 133 Dentofacial Analyser + Free Express Shipping

Description: Julldent Dentofacial AnalyserThe Dento-Facial Analyzer System (DFA) is used by clinicians to mount maxillary casts and evaluate and treat patients.Note We Ship By Express Shipping with 100% Tracking 5-7 Day Delivery FeaturesOcclusal Plane Registration: The system can accurately register and record the patient's occlusal plane, which represents the horizontal alignment of the upper and lower teeth during closure.Three-Plane Tilt Registration: It can capture tilts and inclinations in the occlusal plane in three dimensions. This means it records not only the horizontal orientation but also any tilting or angulations in different directions.Articulator Compatibility: The system is designed to interface seamlessly with an articulator, a device used for simulating the patient's jaw movements. This compatibility allows for precise model articulation and diagnostic accuracy.Reference to Average 100 mm Axis-Incisal Distance: The system uses an average 100 mm axis-incisal distance as a reference point. This standardized measurement ensures consistency and reliability in the registration process.O-Ring Adjustments: It features O-rings that can be adjusted on the Vertical Indicator Rod. These adjustments allow for customization to fit the patient's unique facial landmarks accurately.Facial Proportion Assessment: By adjusting the O-rings on the Vertical Indicator Rod, the system enables the evaluation of facial proportions, aiding in the assessment of how different facial features relate to each other.Lip Commissure Height Measurement: The Index Tray is equipped for measuring the height of the lip commissures, important for marking on study casts and understanding lip posture.Comprehensive Diagnosis: The system's ability to capture occlusal plane data, tilts, and facial proportions contributes to a comprehensive diagnosis of the patient's condition, which is crucial for effective treatment planning.Customization: The system allows for customization to ensure a precise fit to the patient's facial landmarks, enhancing the accuracy of measurements and analysis.Diagnostic Reports: It facilitates the generation of detailed diagnostic reports summarizing the findings, measurements, and assessment of the patient's craniofacial and occlusal characteristics.Orthodontic and Oral Surgery Aid: The DFA system is an invaluable tool for orthodontic and oral surgery practices, providing critical data for treatment planning and improving diagnostic accuracy.Facial Landmark Evaluation: The system assists in the evaluation of facial landmarks, helping clinicians understand how these features contribute to overall facial aesthetics and function. DescriptionJulldent Dentofacial AnalyserJull-Dent 133 Dentofacial Analyser Comparison of the Dento-Facial Analyzer System with an earbow for mounting a maxillary cast.Statement of problemThe Dento-Facial Analyzer System (DFA) is used by clinicians to mount maxillary casts and evaluate and treat patients.PurposeThe purpose of this study was to evaluate maxillary casts mounted using the DFA with casts mounted using the Pana-Mount Facebow (PMF). Both articulation methods were compared against a lateral cephalometric radiograph.Material and methodsFifteen dried human skulls were used. Lateral cephalometric radiographs and 2 maxillary impressions were made of each skull. One cast from each skull was mounted on an articulator by means of the DFA and the other by using the PMF. A standardized photograph of each articulation was made, and the distance from the articular center to the incisal edge position and the occlusal plane angle was measured. The distance from the condylar center to the incisal edge and the occlusal plane angle was measured from cephalometric radiographs. Finally, the 3-dimensional position of each articulation was determined with a SEMI-AUTOMATIC ARTICULATOR. A randomized complete block design analysis of variance (RCBD) and post hoc tests (Tukey-Kramer HSD) (a-.05) were used to evaluate the occlusal plane angle and axis-central incisor distance. A paired 2-sample t-test for means (a=.05) was used to compare the X, Y, and Z distance at the right and left condyle.ResultsThe DFA and PMF mounted the maxillary cast in a position that was not statistically different from the skull when comparing the occlusal plane angle (P=.165). Both the DFA and the PMF located the maxillary central incisor edge position in a significantly different position compared with the skull (P=.OOI) but were not significantly different from each other. The 3-dimensional location of the maxillary casts varied at the condyles by approximately 9 to 10.3 mm.ConclusionThe DFA mounted the maxillary cast in a that was not statistically different from the PMF when comparing the incisal edge position and the occlusal plane angle. Both the DFA and the PMF located the maxillary incisal edge position in a significantly different position compared with the anatomic position on dried human skulls.Key SpecificationsDentofacial Analysers (DFA) are compatible with all Semi Adjustable Articulators (corident, Sam, etc.) Direction to UsePatient Preparation: Ensure the patient is comfortably seated in an upright position.DFA System Setup: Set up the DFA system, ensuring that it is clean and free of debris. Position the patient's head to align with the DFA system's reference points and indicators.Occlusal Plane Registration: Use the DFA system to register the patient's occlusal plane. This typically involves aligning the system with the patient's maxillary and mandibular arches and ensuring it rests in the correct horizontal orientation.Tilt Registration: Capture any tilts or inclinations in the occlusal plane by adjusting the DFA system in three dimensions. This step is crucial for capturing the patient's bite accurately.Facial Landmark Evaluation: Adjust the O-rings on the Vertical Indicator Rod to the patient's facial landmarks, ensuring accurate customization.Measurement and Analysis: Use the DFA system's software to perform measurements and calculations based on the registered occlusal plane, tilts, and facial landmarks. Analyze the data to assess craniofacial relationships, occlusion, and facial proportions.Diagnostic Report: Generate a diagnostic report summarizing the findings, measurements, and assessment. This report will serve as a valuable communication tool with the patient and other dental professionals.Articulator Transfer: Transfer the registered occlusal plane and other relevant data to an articulator, if applicable. Follow the manufacturer's instructions for articulator setup and transfer.Treatment Planning: Based on the analysis and diagnosis, develop a customized treatment plan for the patient. This may include orthodontic treatments, oral surgery, or other interventions to address identified issues.Record Keeping: Maintain accurate records of the diagnostic images, measurements, reports, and treatment plans in the patient's electronic health records (EHR) system Disclaimer"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."

Price: 187.29 USD

Location: DELHI, DELHI

End Time: 2025-02-07T15:41:21.000Z

Shipping Cost: 0 USD