Description: Technical Product BulletinHIGH STRENGTH COMPOUND EPOXY ADHESIVE Takes 24 hours to Cure / full hold and harden. Do not move after 1 hours until it fully cures.You have 1 hour work time which is the amount of time you have to apply the product before it begins to dry.Industrial grade bond to all substrates. The only two substrates which exhibit a weak bond are rubber and plastics.Comes with two mixing tips. Simply remove cap, twist and dispense product through the mixing tip. The mixing tip will not be usable if you stop dispensing for an hour. Keep tip attached until next use at which time you can replace it.This 50ML cartridge requires a standard 50ML dispensing gun. PRODUCT DESCRIPTION:AA-BOND 28 is a two part, heat-resistant and low exothermic, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength. AA-BOND 28 contains a thixotrophic agent which impedes thinning out of the material during heat cure when properly mixed and cured. GENERAL PROPERTIES:Appearance AmberCure TypeRoom temperature or Heat CureBenefitsRoom temperature or Heat Cure Tough enamel like cure Bonds to a variety of substrates Weather resistantMix Ratio by weight100:100 / Resin:HardenerSubstratesMetals, glass, ceramics, wood and many plasticsOperating Temperature-60 to 163 °CTypical Application(s)Staking components, bonding, laminating and repair applications UNCURED PROPERTIES:Specific Gravity, mixed1.07Reactive solids contents, %100Pot Life60 minutes CURE SCHEDULE:4 to 6 hours@ 65°C24 hours@ 25°C MISC PROPERTIES:Shelf Life2 years closed packagingGlass Transition Temp, Tg93°CHardness, Shore D78Lap shear2900 psi (Alum to Alum) GENERAL INFORMATION:For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). HOW TO USE:1) Carefully clean and dry all surfaces to be bonded. 2) Apply AA-BOND 28 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results. AVAILABILITY:This epoxy can be supplied in various different packages. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Price: 19.99 USD
Location: Warwick, Rhode Island
End Time: 2024-09-04T19:18:20.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: AA-BOND 28
Country/Region of Manufacture: United States
Benefits 1: Room temperature Heat Cure Tough enamel like cure
Benefits 2: Bonds to a variety of substrates Weather resistant
Substrates: Metals, glass, ceramics, wood and many plastics
Typical Applications: Staking components, bonding, laminating and repair
MPN: AA-BOND 28
Brand: Atom Adhesive
