Cane Creek

Ignition Source Coil For Honda ATC 200 M 1984 1985

Description: Free shipping in USA 2 year warranty Same day shipping visit our store > --> find parts for : ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other Menu Store Home ATV / UTV / SXS Motorcycles Snowmobiles Watercraft Other IMPORTANT - Important notice about the product.--> Ignition Source Coil 250 ohms for Honda ATC 185 ATC 200 ATC 250 1980-1985 KEY FEATURES  Brand new 250 ohms ignition source coil Often unavailable from the OEM manufacture Highest grade lamination materials All products shipped are tested DESCRIPTION  Read these instructions completely before beginning: Step 1 : Take the ignition cover off. Are the remplacement parts similar? Compare the replacement part to the original. The remplacement part should match, including the mounting hole locations, If not: Double check the application listing with your bike. Step 2 :Take note of the wire colors of the original stator wires and disconnect them from the wiring loom. Step 3: Remove the flywheel using a proper puller tool. Step 4: Remove the baseplate with the original coil. Step 5: Remove the screws that secure the coil and take the coil off. Step 6: Cut the original wire close to the original coil. Take a good look at how the wire is connected to the coil. Connections: Connect the old wire up to the new coil. Use a soldering iron and resin core solder. (the type used in electrical applications Step 7: Mount the coil onto the baseplate, fit the screws using locking compound on the threads and TIGHTEN THE SCREWS SECURELY! Step 8: Refit the stator baseplate. Ensure the wires CANNOT TOUCH THE FLYWHEEL! (especially on the inside of the flywheel) Step 9: Refit the flywheel. Tighten the bolt to specified torque. Step 10: Fit the ignition cover. TROUBLESHOOTING: Engine will not start: Sometimes the source coil wires are reversed. Swap the connections, re-solder the wires and the engine should start. If the engine still does not start, and before calling technical support, performs a few basic tests: Re-check the connections. Make sure you carefully solder the connections. Twisting wires together or taping wires will cause engine inoperability. Check the engine for spark. Is fresh fuel in the gas tank? If you still cannot get the engine to start, have all your testing information ready for a technician prior calling. PAcked with these technologies --> Vehicle models fitment  Honda ATC 185 -- 1980-1983Honda ATC 200 -- 1980-1983Honda ATC 200 E - Big Red -- 1982-1983Honda ATC 200 ES - Big Red -- 1984Honda ATC 200 M -- 1984-1985Honda ATC 200 S -- 1984-1986Honda ATC 200 X -- 1983-1985Honda ATC 250 -- 1981-1984 OEM part replacement  31120-961-00431120-958-023 Specifications  Dimensions: Distance between fixation holes: 58 mm Resistance : 250 ohms +- 20% instructions  Read these instructions completely before beginning: Step 1 : Take the ignition cover off. Are the remplacement parts similar? Compare the replacement part to the original. The remplacement part should match, including the mounting hole locations, If not: Double check the application listing with your bike. Step 2 :Take note of the wire colors of the original stator wires and disconnect them from the wiring loom. Step 3: Remove the flywheel using a proper puller tool. Step 4: Remove the baseplate with the original coil. Step 5: Remove the screws that secure the coil and take the coil off. Step 6: Cut the original wire close to the original coil. Take a good look at how the wire is connected to the coil. Connections: Connect the old wire up to the new coil. Use a soldering iron and resin core solder. (the type used in electrical applications Step 7: Mount the coil onto the baseplate, fit the screws using locking compound on the threads and TIGHTEN THE SCREWS SECURELY! Step 8: Refit the stator baseplate. Ensure the wires CANNOT TOUCH THE FLYWHEEL! (especially on the inside of the flywheel) Step 9: Refit the flywheel. Tighten the bolt to specified torque. Step 10: Fit the ignition cover. TROUBLESHOOTING: Engine will not start: Sometimes the source coil wires are reversed. Swap the connections, re-solder the wires and the engine should start. If the engine still does not start, and before calling technical support, performs a few basic tests: 1) Re-check the connections. Make sure you carefully solder the connections. Twisting wires together or taping wires will cause engine inoperability. 2) Check the engine for spark 3) Is fresh fuel in the gas tank? If you still cannot get the engine to start, have all your testing information ready for a technician prior calling. customer service AsK seller a question duties & taxes International Buyers: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports. Customer service Part requestAbout usAbout seller pageAdd seller to favorite

Price: 35.99 CAD

Location: Coaticook, QC

End Time: 2024-12-11T22:00:48.000Z

Shipping Cost: 11.44 CAD

Product Images

Ignition Source Coil For Honda ATC 200 M 1984 1985Ignition Source Coil For Honda ATC 200 M 1984 1985Ignition Source Coil For Honda ATC 200 M 1984 1985Ignition Source Coil For Honda ATC 200 M 1984 1985Ignition Source Coil For Honda ATC 200 M 1984 1985Ignition Source Coil For Honda ATC 200 M 1984 1985Ignition Source Coil For Honda ATC 200 M 1984 1985Ignition Source Coil For Honda ATC 200 M 1984 1985Ignition Source Coil For Honda ATC 200 M 1984 1985

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 60 Days

Return policy details:

Brand: RMSTATOR

Manufacturer Part Number: RM00042--A--H

OE/OEM Part Number: 31120-961-004, 31120-958-023

Manufacturer Warranty: 2

Recommended

65A MOSFET Regulator for Polaris RZR Ranger 570 900 1000 Turbo 2014-23 | 4016868
65A MOSFET Regulator for Polaris RZR Ranger 570 900 1000 Turbo 2014-23 | 4016868

$99.00

View Details
RMStator Flywheel Rotor RMS120-108061
RMStator Flywheel Rotor RMS120-108061

$107.47

View Details
SurePower ECM Bypass MOSFET Reg. for Polaris Sportsman 500 2006-08 | 4011568
SurePower ECM Bypass MOSFET Reg. for Polaris Sportsman 500 2006-08 | 4011568

$139.00

View Details
RMSTATOR Stator For 2009-2014 Polaris RZR 170
RMSTATOR Stator For 2009-2014 Polaris RZR 170

$70.26

View Details
MOSFET Voltage Regulator for Suzuki RMX 450 Z 2010-2011 2017-2019 | 32800-05G11
MOSFET Voltage Regulator for Suzuki RMX 450 Z 2010-2011 2017-2019 | 32800-05G11

$89.00

View Details
Regulator For Suzuki King Quad F LT LTF Quadrunner E 160 250 300 1987-2004
Regulator For Suzuki King Quad F LT LTF Quadrunner E 160 250 300 1987-2004

$89.00

View Details
Generator Stator for Honda CBR 600 RR 2003 2004 2005 2006 | OEM # 31120-MEE-003
Generator Stator for Honda CBR 600 RR 2003 2004 2005 2006 | OEM # 31120-MEE-003

$129.99

View Details
RMSTATOR Mosfet Voltage Regulator Rectifier
RMSTATOR Mosfet Voltage Regulator Rectifier

$88.72

View Details
Kit Flywheel + Gasket Puller for Arctic Cat 400 2003-2006 | 3430-071 / 3430-053
Kit Flywheel + Gasket Puller for Arctic Cat 400 2003-2006 | 3430-071 / 3430-053

$178.99

View Details
SurePower ECM Bypass Regulator for Polaris Ranger 500 700 2005-2009 | 4011089
SurePower ECM Bypass Regulator for Polaris Ranger 500 700 2005-2009 | 4011089

$139.00

View Details