IFR/Aeroflex ATC-600A Portable Transponder/DME Ramp Test Set

Description: IFR ATC-600A Portable Transponder/DME Ramp Test Set Comes with a manual and what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from IFR and may vary slightly due to upgrades, options, or revisions this unit may or may not have. The unit is guaranteed to work for 30 days, parts and labor. The unit has a new battery pack. List Price was: $9,500.00 in 2004. The Unit's Serial Number Tag Reads: Model Number: ATC-600A Serial Number: 843 Input: 115 V, 60 Hz Key Features: A completely portable unit designed to provide accurate Transponder/DME measurements on the ramp or at the bench. The popular ATC-600A will perform, with radiated signals, all tests required by the revised Federal Aviation Regulations (91.177 and 43 appendix F, as amended December 19, 1973). Reads out XPDR code and altitude numerically and also displays binary pulse information for code and altitude Measures transponder frequency and checks for correct DME channel Front panel connector provided to directly check the output of altitude encoders Capable of checking XPDR input pulse decoder gate for marginal operation Checks position of XPDR second framing pulse relative to F1 Measures transponder receiver sensitivity and SLS tests Precision DME range and velocity signals, both X and Y channel Uses remote tripod mounted antenna - can be accurately spaced from aircraft antenna for power measurements General Description: The ATC-600A is a completely self-contained unit designed to provide accurate Transponder/DME measurements on ramp or at the bench. Compact, mini in size and weight, this portable Test Set permits simulation of the ground station and airborne environment. Meets latest ARINC specifications and FAA regulations (91.177 and 43 appendix F as amended December, 1973) concerning transponder receiver sensitivity and SLS tests. Transponder tests allow quick determination of transmitter power, frequency, percent reply, pilot's code and encoded altitude. Variable-spaced interrogations and reply framing timing checks are also provided. DME testing capabilities include accurate range and velocity simulation, power and frequency, and PRF measurements. Transponder Specifications: Interrogations Output: Mode: A/C, Altitude or Pilot Code, 2:1 interface, or mode A Pulse Spacing: P2 and P3 variable with respect to P1 ±1 µs from nominal for input decoder gate tests PRF: 235 Hz ±10% SLS Test: ±1.0 dB P2 inserted at 0 dB or -9 dB relative to P1 Power: -66 to -79 dBm direct with 34 dB pad ±1.5 dBm Reply Measurements: Power (UUT): 10 W to 1.5 kW peak, ±20%; direct with 34 dB pad. ±3 dB radiated with properly spaced antenna Frequency Check: 1086 to 1093 MHz, ±0.3 MHz Altitude Code: Binary and Numerical Readout, -1.0 to 126.7 thousand feet Pilot Code: Binary and Numerical Readout, 0000 to 7777 Percent Reply: 0-100%, either A/C or A(B) modes F2 Pulse Position: Measurement of rising and falling edge ±0.5 µs from nominal Status Lamps: Ident Pulses, Invalid Altitude Code and No Altitude Code Encoder Test: Direct connection accepts altitude encoder DME Specifications: Interrogations Measurements: PRF: Power (UUT): Frequency Check: Reply Output: Frequency: Paired with VOR: 108.00 MHz (17X-channel) or 108.05 MHz (17Y-channel) standard. Output Power: Approximately -45 direct with 34 dB pad or radiated with properly spaced antenna Range: 0 to 399 NM in 1 NM steps. Accuracy ±0.07 NM ±0.02% Velocity: Crystal-controlled digital velocity with rates of 50, 75, 100, 150, 200, 300, 400, 600, 800, 1200, 1600, and 2400 knots, ±0.02% of setting. Inbound or outbound starting from any selected range. Range steps in velocity mode are 0.025 NM (system) 0.1 NM displayed Percent Reply: 100% or 50% Ident Tone: 1350 Hz (±8 Hz) with equalizing pulses Physical Characteristics: Power: 115/240 VAC, 50 to 400 Hz, 20 W. Internal NICAD battery operation for approximately 2 hours continuous operation. Dimensions: Housed in a portable case 11.4" (29.0 cm) wide, 5.1" (13.0 cm) high, 16.1" (41.0 cm) deep. - does not include packaging Weight: 18 lbs. (8.1 kg) approx. - does not include packaging For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $25.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? 09/07/17

Price: 4749.99 USD

Location: Phoenix, Arizona

End Time: 2024-03-07T20:44:10.000Z

Shipping Cost: N/A USD