Description: ICOM IC-R6 reception modified Icom wideband handy receiver Description Condition: New Continuous coverage of 0.100-1309.995MHz band Continuous coverage of 0.100-1309.995MHz with AM/FM/WFM. You can enjoy receiving a variety of radio broadcasts, air bands, and various utility radios. BTL circuit & large speaker The low frequency output circuit is equipped with a BTL amplifier and a large 36φ speaker, achieving a large volume with an AF output of 150mW or more. Comfortable reception is possible even outdoors or in the car. Power save function Equipped with a power save function that reduces current consumption by significantly shortening the time required to detect the presence or absence of a received signal. Also, when AUTO is selected, the duty ratio will be automatically changed if there is no signal for about 1 minute after power save starts, reducing battery consumption during standby. Approximately 19 hours*2 of reception is possible with alkaline batteries; approximately 15 hours*1 of reception is possible with the included Ni-MH (nickel metal hydride) battery. If you use alkaline batteries, you can receive for a long time of approximately 19 hours*2, which is significantly longer than the approximately 10 hours of IC-R5 (when using alkaline batteries). *1 AF output 50mW, when connected to an external speaker (8Ω load). *2 Depends on the type of battery, etc. 100ch/sec high-speed scanning (in VFO mode) Scan variations are even more extensive. Moreover, it achieves high-speed scanning of 100ch/sec (in VFO mode), which is significantly higher than the previous model IC-R5 (30ch/sec). You can catch signals faster. Various scan functions ●Full scan ●Band scan ●Program scan ●Auto memory light scan ●Memory scan ●Bank scan ●SKIR scan ●Priority scan ●Tone scan ●Link scan Blank line canceller Eliminates the harsh empty line signal that can be heard when there is no call Equipped with a blank line canceller. In addition, the IC-R5's idle line canceller has been further strengthened (Train2 has been added), making it possible to comfortably receive a wider variety of railway radio signals. Of course, it also has extensive signaling functions, including support for MSK control signals used in MCA radio, etc. *The idle line canceller and tone canceller functions do not detect all idle line signals. VSC function (Voice Squelch Control) Automatically skips unintended signals such as control signals and non-modulated signals during scanning, allowing you to capture only the signals that produce audio. Moreover, it can also be used in conjunction with various signaling functions. AF Filter Equipped with an AF filter that suppresses high-frequency noise and enables comfortable reception. This is particularly effective when receiving weak signals or for long periods of time. Equipped with an external power terminal.You can receive data while charging the included Ni-MH (nickel metal hydride) battery using a battery charger (AC adapter/accessory) or battery charger stand (optional BC-194). . It can also be used in a car by connecting a cigarette lighter cable (optional CP-18). Abundant memory & flexible bank system Equipped with 1300 channels of normal memory, 25 sets of scan edges, 50 channels, and 200 channels of auto light scan memory. Moreover, since it uses EEPROM, the memory contents are protected even if the battery dies. In addition, it uses a flexible bank system that can store up to 100 channels of normal memory. Up to 22 banks can be set. Built-in bar antenna for AM radio The built-in bar antenna for receiving AM radio broadcasts allows you to comfortably enjoy AM radio broadcasts without an external antenna. In addition, it is possible to receive frequencies other than the medium wave band, such as FM radio broadcasts, by using the earphone cord as an antenna. External control via CI-V is possible. By using the optional CT-17, it is possible to connect the IC-R6 to a PC with an RS-232C type serial port. Reception frequency, reception mode, squelch status, etc. can be controlled using a computer. Other functions ●Mode/tuning step automatic setting function ●Compatible with CTCSS, DTCS, tone reverse ●Auto squelch function ●14 types of selectable tuning steps ●Squelch monitor function ●Auto power off function ●Battery level display function ● Key lock function ●RF attenuator ●LCD backlight accessory with timer ●Antenna ●Battery charger (AC adapter/BC-196) ●Ni-MH Ni-MH battery ●Belt clip ●Hand strap reception Sensitivity selection Frequency resolution Standard battery external power supply grounding method Current consumption (at 3.0V) Low frequency output Battery life time Low frequency load impedance External shape Dimensions Weight Weight Operating temperature range 0.100 to 252.895MHz 255.100 to 261.895MHz 266.100 to 270.895 MHz 275.100~379.895MHz 382.100~411.895MHz 415.100~809.895MHz 834.100~859.895MHz 889.100~914.895MHz 960.100~1309.995MHz AM/FM/WFM 5Ω (unbalanced) SMA type triple Superheterodyne〈AM/FM〉1st 266.7MHz, 2nd 19.65MHz, 3rd 450kHz 1st 266.7MHz, 2nd 19.95MHz, 3rd 750kHz Normal memory 1300ch/25 sets of scan edges 50ch/Auto light scan memory 200ch [FM] 1.625MHz to 4.995MHz: -10dBμ (typ.) 5.000MHz to 29.995MHz :-12dBμ(typ.) 30.000MHz to 117.995MHz :-15dBμ(typ.) 118.000MHz to 246.995MHz :-15dBμ(typ.) 247.000MHz to 469.995MHz :-15dBμ(typ.) 470.000MHz ~832.995MHz :-10dBμ(typ.) 833.000MHz~1029.995MHz :-11dBμ(typ.) 1030.000MHz~1309.995MHz :-9dBμ(typ.) [WFM]76.000MHz~108.000MHz :1dBμ(typ.) 175.000MHz ~221.995MHz :1dBμ(typ.) 470.000MHz~770.000MHz :5dBμ(typ.) [AM]0.495MHz~4.995MHz :2dBμ(typ.) 5.000MHz~29.995MHz :-1dBμ(typ.) 118.000MHz~136.000 MHz:-4dBμ(typ.) 222.000MHz~246.995MHz:-4dBμ(typ.) 247.000MHz~329.995MHz:-2dBμ(typ.) *The above receiving sensitivity (typ.) is a typical value for each frequency band. [WFM] 150kHz or more/-6dB [AM/FM] 12kHz or more/-9dB, 30kHz or less/-60dB 5/6.25/(8.33)*/(9)*/10/12.5/15/20/25/30/ 50/100/125/200kHz *Cannot be selected depending on the mode/band. DC3V (AA alkaline batteries x 2) DC2.4V (AA Ni-MH x 2) Rated 4.5V (usable range: 4.5 to 6.3V) Negative ground reception standby 65mA typ. AF rated output 130mA typ (External speaker 8Ω, backlight OFF) Power save (1:4) 30mA typ. (DC3V/16Ω (built-in speaker)/10% distortion) 150mW or more (DC3V/8Ω (external speaker)/10% distortion Nickel-metal hydride battery/Approx. 15 hours (AF output 50mW, using the included Ni-MH battery, when connecting an external speaker (8Ω load).) Alkaline battery/Approx. 19 hours (Varies depending on the type of battery) ) INT.16Ω, EXT.8Ω 58(W)×86(H)×29.8(D)mm (excluding protrusions) Approx. 200g (including main body, antenna, and attached battery) -10℃~+60℃( Charging temperature range/O℃~+40℃) Payment Please pay within 5 days after the auction closed. Shipping About other area, please ask me. When you purchase two or more my items, I can send them together and discount shipping cost. Returns Returns are accepted ONLY if the item was not the item described. International Buyers - Please Note: * Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. * Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. * These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. * We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.
Price: 186.38 USD
Location: Japan
End Time: 2024-02-20T07:11:03.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: ICOM
Type: USB Tuner Receiver
Model: IC-R6
UPC: Does not apply
MPN: Does not apply