IA-HW-001018 MADRIX Nebula Advanced SPI Decoder LED Pixel Tape Controller

Description: The versatile LED pixel-tape driverto directly control a wide range of digital LEDs. SPI Converter & Direct ConnectionDirectly connect to a wide range of supported LEDs viatwo 4-pin screw terminals. A signal frequency of up to 24MHz is available. Supply power over USB or 5 V to 24 Vover a 2-pin screw terminal. Art-Net / Streaming ACN / USBNetwork data is directly converted to SPI without theneed for an additional interface. Reliably distribute datafrom any compatible software or hardware controller. Inaddition, simply connect to MADRIX® 5 over USB. Designed For DIN Rails Or WallsIts non-conductive enclosure and standardized design for35 mm top-hat rails make mounting quick, easy, and safe.2 extra brackets are provided for optional wall mounting.9 indicators quickly show the device status with theoption to turn them off. Quality Output Of 12 UniversesEach device drives up to 2,048 RGB pixels while ensuringresponsive delivery of high-quality signals to eachindividual LED. You can choose the output protocolseparately for each of the two ports. Sync Mode & Daisy-Chain SupportMADRIX® 5 and MADRIX® hardware allow you to fullysynchronize Art-Net data for all ports and across devicesto get an optimal image on the LEDs without visualinterruptions. 2 Ethernet ports allow linearly daisychainingseveral devices together. Invaluable FeaturesThe device is ready within seconds after startup. HTPmerging is automatically available for two Ethernetsources. Its firmware is upgradable. Access and changespecific device settings using the built-in webconfiguration page. Package Contents1x MADRIX® NEBULA1x Set of pluggable screw terminals (2x 4-pin and 1x 2-pin)1x USB 2.0 cable (certified)2x Wall-mount brackets1x Technical manual / quick start guideTechnical Specifications: Supply Of Power: DC 5 V – 24 V; overA) 2-pin, pluggable screw terminal (12 A max.),B) 5 V USB,C) Port 1 or 2 sourced from LEDs;6 A max. load per port when supplying through to LEDsPower Consumption:< 1.5 W (300 mA) during normal operation(500 mA max. fused)BTU/h:5.73 during normal operationNetwork Protocols:Art-Net (I, II, 3, 4, incl. ArtSync),Streaming ACN (sACN / ANSI E1.31) RDM Role: Acts on commands and replies to requests with its own status and sensor data via ArtRdm (RDM Responder)Data Output: Firmware ≤ 5.XX: 8x 512 channels SPI TTL (Max. output per port: 680 RGB LEDs / 512 RGBW LEDs / 2,048 1-channel LEDs)Firmware ≥ 6.00: 12x 512 channels SPI TTL (Max. output per port: 1,024 RGB LEDs / 768 RGBW LEDs / 3,072 1-channel LEDs)Supported LEDs: APA101, APA102, APA104, APA106, GS8206, GS8207, GS8208, GW6201, GW6205, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883, SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822, SK9826, SM16703, SM16704, SM16716, TLC5973, TLS3001, TLS3008, TM1803, TM1804, TM1809, TM1812, TM1814, TM1829, UCS512B3, UCS1903, UCS2603, UCS2903, UCS2904, UCS5603, UCS8903, UCS8904, UCS9812S, VS17822, WS2801, WS2803, WS2811, WS2811S, WS2812, WS2812B, WS2812C, WS2813, WS2814, WS2815, WS2818, WS2821, WS2822S, WS2822S Addressing As of September 2023 See www.madrix.com for the latest information.Multiple frequencies are often available per type. Ports: 2x ports (Via 2x 4-pin, pluggable screw terminals)Ethernet: 2x RJ45, Auto MDI-X, daisy-chain support,10/100 MBit/s (Compatible with 1 GBit/s)Ethernet Switch: Lookup Table (ALU) for 1,024 unicast MAC addressesUSB: 1x port, USB 2.0, type-B female socketHandling: 5 status LEDs (+ 4 network status LEDs)Case: Non-conductive, V-0 flammability rating (UL94 test method), designed for 35 mm DIN-rails or wall mountingDimensions: 90 mm × 70 mm × 46 mm (3.54″ × 2.76″ × 1.81″) (Length × Width × Height)Weight: 110 g (0.24 lb) | 132 g (0.29 lb) incl. screw terminals and wall mountsTemperature Range: -10 °C to 70 °C (14 °F to 158 °F) (Operating)-20 °C to 85 °C (-4 °F to 185 °F) (Storage)Relative Humidity: 5 % to 80 %, non-condensing (Operating / Storage)IP Rating: IP20Certificates: CE, EAC, FCC, RoHSWarranty: 5 years of limited manufacturer's warranty MADRIX V5 KEY Starter Kit & Software: > https://www.ebay.com/itm/285731565305

Price: 599.98 USD

Location: Pahrump, Nevada

End Time: 2024-03-24T23:43:29.000Z

Shipping Cost: N/A USD