Hydraulic Top link CAT 1-1 (Ball) with Locking Block + 2 Hoses Various Dimension

Description: Hydraulic Top link CAT 1-1 (Ball) with Locking Block + 2 Hoses Various Dimension Description: The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier. A double-acting control valve on the tractor is necessary for this - an unbeatable combination in combination with the integrated locking block *. * When adjusting the upper link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor's control units do not lock so tightly. This top link is therefore equipped with a locking block. With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted. Furnishing: High quality and workmanship and paintedIncl. Locking blockTop link cat. 12x hydraulic connectionDelivery is completely assembled Technical specifications:Hydraulic connection: 3/8 " Tractor top link with Ø19mm (3/4'') pin holes on both ends (the piston can be rotated as needed)Ball width: 44mm (1-3/4'') (both ends)Cylinder bore: Ø50mm ( 2'')Cat 1 top link rod diameter: Ø30mm (1-3/16'') Hydraulic pressure max. 250 barThrust: 3.5 toPulling force: 2.3 toWeight about 8 kg + 2 x hydraulic hose with plug 1/2 " and dust cover Technical specifications: Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + unionHose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 W.P.330Operating pressure: 180 barLength: 70 cm

Price: 189 USD

Location: Apeldoorn

End Time: 2025-01-21T17:09:26.000Z

Shipping Cost: 0 USD