Hybrid 5.5kW Solar Inverter 48V MPPT US5000 Pylontech Compatible ENA Listed G99

Description: 5.5KW HYBRID INVERTER WITH DUAL MPPT CHARGER 6.5KW -ENERGY METER - BMS PYLONTECH LITHIUM ION - 1 YEAR WARRANTY - UK-BASED SUPPORT We uploaded the real images of the inverter that you are buying. This product is ENA Listed and complies with the UK Standard G98.G99 It works as hybrid with grid or as off-grid with grid back up. If in off grid mode , certification and MCS is not required. The inverter is programmed to operate with lithium ion batteries like the full range of Pylontech: US2000C, US3000C, US5000 The inverter is nearly new as it was exchanged for a three-phase one, there is some marks on the metal case and the original box is not available. The inverter has the latest firmware and communicates with lithium-ion batteries from Pylontech (US2000, US3000, US5000) The box contains 5.5kW Inverter/chargerPair of MC4 connectorsEastron energy meter SDM630BMS CableModbus communication cardLong Pylontech power cables and BMS cableFree LED Solar Light 3.2Watt Specter The inverter works off grid in case you do not have a utility supply, in that case, the AC output will support all kind of AC-Loads up to 240VAC at 5500Watt. If you run a system in parallel with the grid (hybrid mode), the inverter will feed the "family" loads up to 5500Watt and any additional load will be covered by the national grid. In the hybrid mode, the ac output (off-grid supply) can still be activated to supply critical loads (fridges, air conditioning, servers, etc) when there is a loss of the grid/mains. NOTICE: The inverter will be delivered with power terminals suitable for the long pair of pylontech cables We also included the right BMS cable that is required to communicate with the US5000/US2000C/US3000C batteries, it is necessary to use the RS485 port of the battery and set the first dip switch of the master battery UP: 1 Up, 2 Down, 3 Down, 4 Down. TECHNICAL SPECIFICATION TABLE - VOLTACON ESS 5500WATTMODELESS 5.5KWMaximum PV Input Power6500 WRated Output Power5500 WMaximum Charging Power2880 WPV INPUT (DC)Nominal DC Voltage / Maximum DC Voltage360 VDC / 500 VDCStart-up Voltage / Initial Feeding Voltage116 VDC / 150 VDCMPP Voltage Range120 VDC ~ 450 VDCNumber of MPP Trackers / Maximum Input Current 2 / 2 x 13 A GRID OUTPUTNominal Output Voltage208/220/230/240 VACOutput Voltage Range184 - 264.5 VAC*Max. Output Current23.9A*Maximum Conversion Efficiency (DC/AC)96%European Efficiency @ Vnominal95%AC INPUTAC Start-up Voltage / Auto Restart Voltage120 - 140 VAC / 180 VACAcceptable Input Voltage Range 170 -280 VAC Maximum AC Input Current 40 A BATTERY MODE OUTPUT (AC)Nominal Output Voltage208/220/230/240 VACMaximum Conversion Efficiency (DC/AC)93%BATTERY & CHARGERNominal DC Voltage48 VDCMaximum Charging Current100 APHYSICALDimension, D X W X H (mm)214 x 621 x 500 Net Weight (kgs)25STANDARDCompliance SafetyIEC/EN 62109-1/-2, IEC 62040-1, EN 61000-6-4, EN IEC 61000-6-2, EN IEC 61000-3-11, EN 61000-3-12, IEC 61727, IEC 62116, G99, NRS 097-2-1, EN 50549-1BATTERY MODULE ESS II-4810CAPACITY5120WhPARAMETERSNorminal Voltage51.2VDCFull Charge Voltage(FC)56VFull Discharge Voltage(FD)42VTypical Capacity100 AhMax Continuous Discharging Current150AMax Discharging Current192A at 1minProtecttionBMS, breakerCharge Voltage56VCharge Current 20A (0.2C)Maximum Charge current50A (0.5C)Standard Charge method0.2C CC (Constant current) charge to FC, CV (Contstant voltage FC) charge till charge current decline to <0.05CInner Resistance≤20m ohmPHYSICALDimension, D X W X H (mm)214 x 621 x 550Net Weight (kgs)30STANDARDCompliance SafetyIEC 62619, EN 61000-6-3, EN 61000-6-1, UKCA, UN38.3

Price: 990 GBP

Location: Coventry

End Time: 2025-01-09T19:34:53.000Z

Shipping Cost: 43.42 GBP