HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

Description: 100% Brand New. Color: GoldMaterial: Copper Size: 12cm(L)*7.5cm(W)*16CM(H) Compare the detail sizes with yours, please allow 1-2MM differs due to manual measurement Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. The output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting, so it fits all argon, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our auction for those. A very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. If you have a Miller, Lincoln, or Hobart welder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut. Package Content: 1 x Argon CO2 Flow meter Brand New Argon / CO2 regulator and flow meter. Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators. The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube.

Price: 27.84 USD

Location: Lathrop, California

End Time: 2024-10-13T20:37:33.000Z

Shipping Cost: 0 USD