Hubbell SNAP2182IGL Isolated GND SnapConnect Hospital Outlet Receptacle LED 20A

Description: Fruit Ridge Tools, LLC Our eBay Store Contact Us Add to Favorite Sellers Hubbell SNAP2182IGL Isolated Gnd SnapConnect Hospital Outlet Receptacle LED 20A Product Details Quantity in Lot: 1 Brand: Hubbell Wiring Device-Kellems Part Number: SNAP2182IGL Color: Orange Type: Phase (if applicable) : 1 Phase Poles: 2 Wires: 3 NEMA Number: 5-15R Amperage: 20A Voltage: 125VAC Grade: Specification Grade Terminal Type(s): SNAPConnect Pigtail Ground: Grounding Hubbell SNAP2182IGL orange duplex SnapConnect hospital grade decorator isolated ground receptacle with twin LED power indicators on the face. Please note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below). SNAPConnect’s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. We do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some. Hospital grade, SnapConnect wired, NEMA 5-20R, 2-pole, 3-wire, isolated ground, rated 20A 125V. Hospital Grade devices are top of the line in their category, designed for the high-abuse environments typically found in health care facilities. Isolated ground devices have a grounding terminal that is electronically isolated from the strap to eliminate electrical interference (noise) in grounding networks that can cause problems in modern electronics. Grounding of this device requires that an isolated ground path be established from the receptacle grounding terminal to a suitable equipment grounding point "upstream" from the device. Each is individually packaged; packaging may differ from photo. Features include:Twin LED indicators on the face to provide positive indication of power state Abuse resistant nylon for extra heavy use applications SNAPConnect eliminates exposed live parts Stainless steel autoground clip2-pole, 3-wire, rated at 20A 125V As was mentioned, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere:SNAP1RA: solid wire; clear right angle terminal with 6" leads, 600V, #12 AWG THHN/THWN-2, Polycarbonate housing material SNAP2RA: stranded wire; clear right angle terminal with 6" leads, 600V, #12 AWG THHN/THWN-2, polycarbonate housing material SNAP1RNA (assembled in USA): solid wire; clear right angle terminal with 6" leads, 600V, #12 AWG THHN/THWN-2, polycarbonate housing material SNAP2RNA (assembled in USA): stranded wire; clear right angle terminal with 6" leads, 600V, #12 AWG THHN/THWN-2, polycarbonate housing material This is New Old Stock and is returnable for any reason. (SKU # HUBSNAP2182IGL-EA; Weight: 0.2000 lbs.)

Price: 18.99 USD

Location: Jamestown, New York

End Time: 2024-11-22T04:42:54.000Z

Shipping Cost: 0 USD