Honda XBR500 20mm Petrol Fuel Tap Petcock UK F, G, H, SH, SJ 1985

Description: IMPOSSIBLE TO FIND! and replacements are no longer available from Honda We are a genuine UK seller with UK stock and can get this to you usually within 3 or 4 days as we post daily. Maybe faster if you choose 1st class delivery. Check out our fantastic feedback too. Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence! This will fit your Honda XBR500 motorcycle All Versions F, G, H, SH, SJ 1985 TO 1989 NOTE THE SHORTER BRASS TUBE WILL NEED TO BE REMOVED FROM THE TAP IN ORDER TO FIT THIS INSIDE YOUR THREADED TANK STUB The pictures show it fitted to a 1981/1982 USA version Honda 750/4 imported bike with the same thread rate. This is a brand new reproduced fuel tap and it has the following settings... ON, OFF and RESERVE. This has been produced for the German market and so is labelled as R - Reservieren = Reserve Zu = Closed / Shut /Off A - Auf = On Note that my tap has the fuel feed on the bottom rather than the right which is different to the originals but the fuel pipe fits nicely under the carburettors The casting of my taps is superb and they are all checked for smooth operation before dispatch. These are very nice taps Please take a good look at the pictures of my taps and see if you can find better castings elsewhere! My taps are as good as you are going to buy, I've searched high and low for a long time for taps that are just right and these are the best! I personally check each tap before dispatch for any casting errors and tightness of the tap. To date, I have had no returns or issues with my supplier and manufacturer. Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps. Technical specifications: These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them! This will be a direct fit on your bike. Connection to fuel line: 8mm internal diameter pipe. We sell good quality and heavy wall thickness petrol pipe to suit this tap. See our other listings. Connection to fuel tank : 20mm x 1.0mm metric fine thread Taps are obviously supplied with a seal and a fibre washer too. We recommend that you fit a large inline filter too as these taps do not have filter bowls or mesh filters on the tank tubes. They do have a mesh filter in the bottom fitting. Dispatched with 2nd Class parcel postage. 1st class postage is available at only 2 extra. Please could you make your selection on purchase. MadMopeds UK

Price: 27.9 GBP

Location: Beccles, Suffolk

End Time: 2024-01-08T17:58:02.000Z

Shipping Cost: 19.85 GBP