Description: Arizona Custom GripsHAWES WESTERN MARSHAL1873 SINGLE ACTION ARMY STYLE REVOLVERS~ Exclusive ~ MAGNA-TUSK™white STAG GRIPSSimulated Stag Grips milled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~two-PIECE (with SCREWHOLE) STYLETHIS AUCTION IS FOR OUR TWO-PIECE (SCREWHOLE) STYLE GRIPS. SEE BELOW.********ONE-PIECE VS. TWO-PIECE STYLE GRIPS:A Choice for Every User! Two-Piece style grips incorporate a visible screw and screwhole, allowing easy and quick removal for cleaning or maintenance of your revolver. One-piece style grips do not use a screw but instead use an internal spacer. Both styles are traditional and historical designs and both were originally used on early Colts, so it is a matter of personal preference. Both styles of our grips will interchange and work on either style of grip frame. See below.One-Piece style grips (i.e., grips which do not have a visible screwhole in the grips) incorporate a user installed spacer (included with the grips) between the grip panels, as seen on many of the early Colts. The spacer is sent unmounted to ensure optimum fit with your revolver, with simple, quick installation which takes about one minute or so per grip. Fully illustrated instructions are included. This results in a rock-tight fit, without the need of a screw. Preferred by many collectors for their clean lines and traditional look. One-Piece style grips are removed by removing the three backstrap screws, and pulling the grip and backstrap backwards. Reinstallation is in reverse order. Alternatively, our Two-Piece style grips (i.e., grips with a visible screw and screwhole) offer the superior convenience of quick grip removal. They include a free Conversion kit, allowing their use on revolvers that are currently using one-piece style grips that do not have a grip pin. The conversion kit replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight on the frame, allowing no movement. This requires no modification to your revolver and gives you the advantage of the ease of maintenance of Two-Piece grips, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many collectors.Fully illustrated, detailed instructions are included with each set of grips. 01042300~~~~~A Short History of the Hawes Western Marshal RevolversFrom the early 1950’s to the 1970’s, the Hollywood Western was the undisputed king of television and the silver screen. Television shows such as Gunsmoke, Bonanza, The Virginian, Rawhide, and Wagon Train, and many others too numerous to mention, were some of the most watched TV productions ever made. At the same time the Hollywood movie industry was also in full swing, releasing some of the most memorable Western genre movie productions in Hollywood history. Several enterprising firearms firms capitalized on the Single Action craze which arose largely due to the public’s fascination with the lore of the Old West, which to a very large degree continues unabated to this day.In the late 1960’s through the 1970’s, Hawes Firearms Inc., based in Los Angeles, California, imported and marketed a popular series of Single Action Army style revolvers known as the Western Marshal series. These revolvers were manufactured in Germany by the J.P. Sauer & Sohn firm and imported primarily by Hawes. What these will fit:These grips WILL FIT the following Hawes “Western Marshal” series revolvers: ●Western Marshal;●Chief Marshal;●Federal Marshal;●Deputy Marshal;●Silver City Marshal;●Texas Marshal;●Montana Marshal; What these will NOT fit:Please note that these will NOT fit the Great Western Arms revolvers manufactured in the United States by the Great Western Arms Company of Los Angeles from 1954 to 1964. These will also NOT fit the Herters “Powermag” revolvers (also made by J.P. Sauer & Sohn) which incorporate a much taller gripframe.Also, these will NOT fit any other make of revolver, including any of the Italian replicas (such as Pietta, Uberti, and Armi San Marco), nor any of the Ruger or Colt manufactured revolvers. Please email if you have any questions, are unsure, or cannot find what you need.For an additional charge, custom fitting is an option. If interested, please contact us for further details. 01042300 Arizona Custom Grips About Magna-Tusk™ Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, a product of Arizona Custom Grips, are manufactured out of our high-grade, high density ivory material designed exclusively as a premium, high-strength grip material. Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. 08292000 Please note that the photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee your complete satisfaction with every purchase!
Price: 89.95 USD
Location: Mesa, Arizona
End Time: 2023-09-04T18:19:00.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Arizona Custom Grips
For Gun Make: HAWES (J.P. SAUER & SOHN) WESTERN MARSHAL
Color: White Stag
MPN: Does Not Apply
For Gun Type: HAWES (J.P. SAUER & SOHN) WESTERN MARSHAL
Material: Magna-Tusk
Country/Region of Manufacture: United States
Material/Finish: Magna-Tusk White Stag
Available Variations
Color: Silver Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Gold Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Antique Nickel Steer Skull
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Red Steer Skull
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: No Medallion
Price: 89.95 USD
Available Quantity: 100
Quantity Sold: 1
Color: Silver Colt
Price: 109.95 USD
Available Quantity: 100
Quantity Sold: 1
Color: Gold Colt
Price: 109.95 USD
Available Quantity: 100
Quantity Sold: 0
