Description: Description HamGeek MCHF V0.6.3 HF SDR Transceiver QRP Transceiver Amateur Ham Radio (Transparent Buttons) Description: This is an SDR HF QRP transceiver that has been popular all over the world since its launch and has at least 30,000 users so far. Its advantages are: small and portable, cost-effective, full-featured, and direct selection of software radio circuit models. For electronics enthusiasts who like DIY and hardware, this is a very good hands-on tool. It can be used to familiarize yourself with the working principle of amateur radio transceivers; for software enthusiasts who write code programming and code farmers, you can also use this hardware to modify the source code by yourself, add or reduce some functions, and give full play to your code farmers. With technical ability, you can modify and upgrade the software of this machine at will. For college students studying electronic technology, it can be used to test their own learning level. And QRP communication enthusiasts can use the assembled kit for various outdoor QRP communication, especially digital communication using PSK31, RTTY and JT65. For emergency communication, it is a small and portable emergency communication equipment. Features: - Spectrum Dynamic Waterfall Display - Multiple Working Modes: Receive Mode, Transmit Mode, TUNE Mode, VFO Mode, SPLIT Mode - DSP Digital Signal Processing Noise Reduction - Automatic Notch Filter - Humanized Interface Color Display - Receive Fine Tuning Function, Changeable MIC Gain Value - VCC Power Supply Voltage Indication Table - Transmit Signal Strength Display Table - Multifunctional Instrument: SWR Standing Wave Ratio Meter, AVD Audio Frequency Meter, ALC - Signal Modulation Meter - Build in USB Sound Card support WSJT-X use FT-817 Rig - Acc Jack Port Support 70-100W HF Pa Amp T/R - V0.6 pcb redesign upgrade many hardware mod* - Inside MIC and PTT (Press TUNE) Basic Parameters: - Weight: 0.9KG/2LB - Overall size: 190 x 69 x 45mm/7.5 x 2.7 x 1.8" (WxHxT) - Frequency range: Receive: 2.5-30MHz; Transmit: All HAM HF bands - Operating Mode: SSB (J3E), CW (A1A), and AM (A3E) - Minimum frequency step: 1Hz - Antenna impedance: 50Ω - Operating temperature range: -10℃ to +60℃ - Frequency Stability: ±1.5ppm (5 minutes on), -10°C to +60°C (standard); ±0.5ppm (5 minutes on), -10°C to +60°C (TCXO-M) - Working voltage: 9~15V DC - Working current: Receiving: 410MA-440MA (maximum display brightness). Minimum LCD brightness can be reduced by 40-60MA. After hardware improvement, it will drop by 50%-80%; about 60MA after shutdown, and 3-5MA after power amplifier driver level improvement. Transmit: 3A (FULL); 1.5A (5W) - Transmitting frequency band: 3.5Mhz~3.9MHz, 5351.5-5366.5 kHz, 7MHz~7.3MHz, 10.1 MHz~10.150 MHz, 14MHz~14.350MHz, 18.068 MHz~18.168MHz, 21MHz~21.450MHz, 24.890MHz~24.990 MHz, and 28MHz~ 29.700MHz - Transmitting power: Nominal 10W, 15W (at 13.8V FULL) - Modulation method: SSB software balanced modulation, AM software low-level modulation - Spurious suppression: ≥40dBc - Carrier suppression: ≥45dBc - Selectivity: SSB 2.3KHz (-6db), CW 500Hz (-6db) - Receive sensitivity: 0.11uV-0.89uV (RFC 50-20); better than -108 dBm (0.89uV) in 2.3 kHz bandwidth; better than -120 dBm (0.22uV) in 300 Hz bandwidth - Receiving frequency band: 3.5-30 MHz (nominal); the widest continuous coverage is 1.8-32 MHz - Dynamic Range: Better than 95dB - RIT frequency fine-tuning range: ±1kHz - Audio output: 0.5W at 8Ω - FM sensitivity for 12 dB SINAD, CCITT filtering: 7.2 kHz BW filter: -103.7 dBm (1.46uV) with 1 kHz tone at ±1.5 kHz; 10 kHz bandwidth filter: -102.1 dBm (1.75uV) with 1 kHz tone at ±1.5 kHz; 10 kHz bandwidth filter: -104.0 dBm (1.41uV) with 1 kHz tone at ±3kHz; 12 kHz bandwidth filter: -102.7 dBm (1.63uV) with 1 kHz tone at ±3kHz; 15 kHz BW filter: -99dBm dBm (2.50uV) with 1 kHz tone at ±3 kHz Package Included: - 1 x HF SDR Transceiver - 1 x Power Adapter - 1 x Handheld Microphone Note: - Battery is not included.Payment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.Custom Duties & Taxes 1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your country's customs office and inform us what/how much should declare before shipping.Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. On Jan 4, 2024 at 03:39:14 PST, seller added the following information:
Price: 349.99 USD
Location: Shenzhen
End Time: 2024-03-04T09:07:08.000Z
Shipping Cost: 8 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: Unbranded
Type: HF SDR Transceiver
Manufacturer Warranty: 2 Years
Color: Black
UPC: Does not apply
MPN: Does not apply
Country/Region of Manufacture: China