Description: I have for your consideration, this new, Arduino based GPSDO. It uses a UBLOX Neo-M8N GPS to control a CTI OSC5A2B02 OCXO. This is a new build using US sourced (Mouser) components and shipped from the USA. The 10 MHz Square Wave Reference Signal can be used to control your frequency based test equipment or radios. It has an exceptionally clean, low phase noise signal that is accurate to approximately 0.001Hz. The nice compact aluminum enclosure comes in at 88x38x100mm. Also included is a 10MHz Band Pass Filter that can be used to convert the square wave into a sine wave. The PLL control is accomplished using an Arduino Nano that can be powered and monitored via computer using a usb c connection (Remove the top of the case and plug the Arduino into your computer using a usb c cable. Using Arduino IDE software, you can monitor the output performance characteristics and make adjustments to the gain and other parameters.) Note: this requires knowledge of Arduino programming and GPS control systems and is not necessary for use. Simply plug in the unit, allow the GPS to obtain a lock, and the device is ready for use. To setup for use: connect and place antenna in area with good view of the sky and plug in the unit. (See pictures for reference) Once the GPS locks onto several satellites and the OCXO warms up (~15 minutes) the reference signal will self calibrate and the red “GPS Lock” LED will light up. The GPSDO can then be used. The GPSDO is always powered on when plugged in and will maintain its lock status. LED Status: Blinking: Acquiring satellite lock Off: Satellite lock completed, acquiring OCXO lock Solid: GPS & OCXO locked, ready for use What’s included: GPSDO, power cord, GPS antenna. What’s NOT included: any additional hardware shown for demonstration purposes (frequency counters, oscilloscopes, etc). Anything not specifically listed in “What’s included“
Price: 109 USD
Location: Livonia, New York
End Time: 2024-08-25T11:58:25.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: G.P.S
Model: Neo-M8N, Arduino Nano, CTI OSC5A2B02
