GODIAG BMW CAS1/CAS2 Mech-Key Test Platform Detect CAS Matching CAS Data Read

Description: Product Description Pls Note: This item only shipped to The United States,If you are buyers from United States, Only take 2-5 working day for delivery. If you need to return the item for some reasons, please contact us via eBay message at the first time to get the RMA#,and return address instead of sending back directly without permission,thank you! GODIAG Fit For BMW CAS1/CAS2 Mech-Key Test Platform Detect CAS & Key Synchronization Solder-free Matching CAS Data Read, Write and Progarm GODIAG BMW CAS1/CAS2 Mech-Key Test Platform is a dedicated device developed for BMW lo-cksmiths, maintenance engineers and CAS1 / CAS2 progarmming engineers. It can cooperate with the key progarmming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lost matching or key addition operations. Please note that this product is only suitable for mechanical keys. Note: GODIAG BMW CAS1/CAS2 Mech-Key Test Platform does not support semi-intelligent smart key CAS2 and cannot be used with diagnostic equipment or with GT100, GT100+. If necessary, please purchase a semi-intelligent smart key detection platform for the semi-intelligent smart key CAS2. Product Features: 1. Detect CAS and key synchronization 2. Solder-free matching CAS1/CAS2 mechanical key 3. CAS data reading, writing and progarmming 4. All keys lost /adding keys matching 5. CAS key data backup 6. CAS module function judgment Product Functions: 1.Check if the CAS1/CAS2 module and mechanical keys are synchronized. 2.Cooperate with the key progarmming devices like Xhorse Key Tool Plus Pad / Xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 / CGDI BMW / Lonsdor devices, OBDSTAR devices, etc., to perform all key lost matching or key addition operations. 3.CAS1/CAS2 module diagnostics 4.CAS1 / CAS2 module progarmming Synchronous detection of module and key: Check whether the CAS2 module and mechanical key can be synchronized: Step 1: Connect the CAS2 module according to the connection diagramStep 2: Put the key into the key sensing areaStep 3: Connect the power supply. Step 4: Press the start switch (press the start switch once to turn on the CAS power and automatically detect whether the key and CAS are synchronized, press it again to turn off the CAS power and turn off the detection). Synchronization judgment method: when the detection start switch is pressed, the Power indicator light will light up. If the key is synchronized with CAS2, the CAS module key induction coil indicator light will flash regularly. If it is an unsynchronized key, the key induction coil indicator light will only flash quickly for 2 seconds. [If the key is synchronized with the CAS module, the IMMO synchronization detection indicator light will light up and the internal buzzer of the machine will sound. If the key is not synchronized with the CAS module, the IMMO synchronization detection indicator light will not light up and the internal buzzer of the machine will not sound.] Step 5: Press and hold the analog start/stop button, the IMMO synchronization detection indicator light will go out after 3 seconds. The INDUC sensor indicator light also goes out. After releasing, the IMMO synchronization detection indicator light will light up. The INDUC sensor indicator light flashes. CAS1 module and key synchronization detection: 1.Connect the device according to the connection diagram. Please use 12V 2.5A for power supply, otherwise the CAS1 module cannot be driven. [Do not connect the CAS2 module] 2.Press the start switch [you can see the START-STOP indicator light on the CAS lights up] 3.Insert the key into CAS1 4.Press the CAS1 key. If the key is synchronized with the CAS1 module, the CAS1 key will be lo-cked. It will automatically exits if the key is not synchronized. CAS2 mechanical key module key progarmming and module progarmming identification diagnostic connection demonstration: The following uses Xhorse vvdi2 device to perform BMW CAS2 mechanical key progarmming and matching operations: 1.Connect the CAS2 mechanical key module and key progarmming diagnostic equipment according to the connection diagram. Press the start button to provide power to CAS2.2.Select “key learn—CAS/EWS Information---Connect-- Read EEPROM”. [Note: Take away the key and do not perform synchronization detection between the key and the CAS2 module before connecting to read data. Just press the start button to power the CAS module. If the CAS module detects a synchronized key, then the connected device cannot read the data. ] Save to File... If you want to read the CAS mileage or modify the CAS mileage, please operate the corresponding menu“Read KM”.It can also read CAS code-DME. 3.Key progarmming steps: select “key learn—CAS Key Learn ---Connect” , select “Get Key Info” and “Save Key Info”. 4. Select an unused key position, be sure to select the “prepare dealer key with Progarmmer” menu, and use the VVDI2 key Progarmmer to generate the key. If the key is placed in the key sensing area of the GODIAG BMW CAS1/CAS2 Mech-Key Test Platform, the dealer key will not be generated. 5. After progarmming the dealer key, place the key into the Godiag BMW CAS1/CAS2 Mech-Key Test Platform sensor port for testing. For test steps, please refer to module and key synchronization detection.If the new key detection is out of sync, please synchronize CAS and DME or synchronize CAS and ELV. Reconnect the device and module and press the button‘Check the start switch’ If the IMMO light cannot light up, enter the VVDI2 menu “Key Learn—CAS/EWS Information—Connect—Synch DME-CAS or Synch CAS-ELV” for synchronization operation. [When performing synchronization, the key must be placed in the key sensing progarmming area of the VVDI2 device.] The following uses the Xhorse vvdi2 device to perform the BMW CAS1 key progarmming and matching operation: 1.Connect the CAS1 module and the key progarmming diagnostic device according to the connection diagram. Press the START switch on the Godiag BMW CAS1/CAS2 Mech-Key Test Platform and the POW indicator light will light up, indicating that the test platform has output power. The indicator light on the CAS1 mode will also light up. [Please use 12V 2.5A power supply, otherwise it will not be able to drive the CAS1 module]2.Select “key learn—CAS/EWS Information---Connect-- Read EEPROM”. [Be careful not to insert the key. If the data cannot be read, please reconnect and turn on the platform power.] [Note: Do not perform a synchronization test between the key and the CAS1 module, otherwise the connection or data reading will not be possible. If a synchronization test is performed, please disconnect the power supply and reconnect the device and CAS module.] Save to File... If you want to read the CAS mileage or modify the CAS mileage, please operate the corresponding menu "Read KM". It can also read CAS code-DME. 3.Key progarmming steps: select “key learn—CAS Key Learn----Connect”. Select “Get Key Info” and “Save Key Info”. 4.Select an unused key position, be sure to select the “prepare dealer key with Progarmmer” menu, and use the VVDI2 key Progarmmer to generate the key. [Because the CAS1 module key identification socket or GODIAG BMW CAS1/CAS2 Mech-Key Test Platform key sensor cannot generate dealer keys.] 5. After the dealer key is successfully Progarmmed, place the key into the CAS1 module key module socket for testing. For test steps, please refer to the CAS1 module and key synchronization detection steps.If the IMMO light cannot light up, enter the VVDI2 menu “Key Learn—CAS/EWS Information—Connect—Synch DME-CAS or Synch CAS-ELV” for synchronization. [When performing synchronization, the key must be placed in the VVDI2 device key sensing area.] Package Includes: 1pc x GODIAG For BMW CAS1/CAS2 Mech-Key Test Platform 1pc x OBD2 to DB25 Cable Payment Delivery details Terms of sales About us Contact us We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment.We are not responsible for buyers’ local taxes.Please include your special requests in eBay note if there is any.We reserve the final right of selling 1. We only Ship to your confirmed Shipping Addresses in Ebay. If you would like to post other address, pls timely leave us a note or emails when making the payment. 2. Item will be shipped by USPS or FEDEX or UPS , exact delivery time varies by varies shipping methods and your location. 3. If you dont receive the item within 15 working days from payment, please contact us, We will track the shipment and get back to you as soon as possible with a reply. 1. 12 Months Manufacturess Warranty for most of items. 2. Unlimited Technical Service is available. 3. For personal interests to return the item, please choose the reason of JUST DONT LIKE IT or CHANGE MY MIND. You have 30 days to contact us for returning it from the date you received it. If this item is in your possession more than 30 days, it is considered as used and we will not issue you any refund or replacement. 4. All returned items must be in the original packaging and you must provide us with tracking number. We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years.We are authorized distributor of GODIAG XHORSE AUTEL OBDSTAR LAUNCH CG etc., and more brands will be show in our store in near future.We have warehouse in US,UK,Czech Republic and China to ensure fast shipment and after-sale service.We have more than 100 employees devoting to customer satisfaction. Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.We will reply in 24 business hours.Business time: GMT8 (9:00-18:00) from Monday to Friday. Payment We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment.We are not responsible for buyers’ local taxes.Please include your special requests in eBay note if there is any.We reserve the final right of selling Delivery details 1. We only Ship to your confirmed Shipping Addresses in Ebay. If you would like to post other address, pls timely leave us a note or emails when making the payment. 2. Item will be shipped by USPS or FEDEX or UPS , exact delivery time varies by varies shipping methods and your location. 3. If you dont receive the item within 15 working days from payment, please contact us, We will track the shipment and get back to you as soon as possible with a reply. Terms of sales 1. 12 Months Manufacturess Warranty for most of items. 2. Unlimited Technical Service is available. 3. For personal interests to return the item, please choose the reason of JUST DONT LIKE IT or CHANGE MY MIND. You have 30 days to contact us for returning it from the date you received it. If this item is in your possession more than 30 days, it is considered as used and we will not issue you any refund or replacement. 4. All returned items must be in the original packaging and you must provide us with tracking number. About us We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years.We are authorized distributor of GODIAG XHORSE AUTEL OBDSTAR LAUNCH CG etc., and more brands will be show in our store in near future.We have warehouse in US,UK,Czech Republic and China to ensure fast shipment and after-sale service.We have more than 100 employees devoting to customer satisfaction. Contact us Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.We will reply in 24 business hours.Business time: GMT8 (9:00-18:00) from Monday to Friday. powered by

Price: 59.99 USD

Location: Perth Amboy, New Jersey

End Time: 2024-10-22T01:08:59.000Z

Shipping Cost: 0 USD