GM 8L45 8L90 Transmission Signal Accumulator Piston Kit Sonnax 154740-06K

Description: 8L45, 8L90 Signal Accumulator Piston KitSonnax Part No. 154740-06KIncludes 4 piston sets which fit any of 7 locations.GM 8L45 and 8L90 transmissions often suffer burnt clutches, shift concerns, low line pressure and/or converter apply complaints due to excess wear in the signal accumulator piston bores in the control solenoid valve body casting. This wear allows valuable VFS signal pressure to exhaust, preventing proper shift control, line pressure regulation, and/or converter clutch apply.The Sonnax drop-in signal accumulator piston kit 154740-06K allows bores to be reconditioned quickly and easily with no reaming required. The hydraulic integrity of the VFS signal pressure circuits are re-established, and future wear prevented with positive sealing and wear resistant components.Hardcoat anodized aluminum piston combats premature wearAnnular grooves to reduce wear rateHighly wear-resistant sleeve to prevent future wearPositive sealing O-ringed plug prevents leakage in already worn boresMating spring to re-establish OE dampening actionDrop-in Zip Valve™ parts install quickly and easilyContentsSleeves (4)Pistons (4)Springs (4)O-Rings (6) 2 ExtraEnd Plugs (4) A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important InformationShippingReturnsCore PolicyImportant InformationShippingReturnsCore Policy As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items8L45, 8L90 Signal Accumulator Piston Kit Sonnax Part No. 154740-06K Includes 4 piston sets which fit any of 7 locations. GM 8L45 and 8L90 transmissions often suffer burnt clutches, shift concerns, low line pressure and/or converter apply complaints due to excess wear in the signal accumulator piston bores in the control solenoid valve body casting. This wear allows valuable VFS signal pressure to exhaust, preventing proper shift control, line pressure regulation, and/or converter clutch apply. The Sonnax drop-in signal accumulator piston kit 154740-06K allows bores to be reconditioned quickly and easily with no reaming required. The hydraulic integrity of the VFS signal pressure circuits are re-established, and future wear prevented with positive sealing and wear resistant components. ---Hardcoat anodized aluminum piston combats premature wear ---Annular grooves to reduce wear rate ---Highly wear-resistant sleeve to prevent future wear ---Positive sealing O-ringed plug prevents leakage in already worn bores ---Mating spring to re-establish OE dampening action ---Drop-in Zip Valve™ parts install quickly and easily Contents ---Sleeves (4) ---Pistons (4) ---Springs (4) ---O-Rings (6) 2 Extra ---End Plugs (4) 8L45, 8L90 Signal Accumulator Piston KitSonnax Part No. 154740-06KIncludes 4 piston sets which fit any of 7 locations.GM 8L45 and 8L90 transmissions often suffer burnt clutches, shift concerns, low line pressure and/or converter apply complaints due to excess wear in the signal accumulator piston bores in the control solenoid valve body casting. This wear allows valuable VFS signal pressure to exhaust, preventing proper shift control, line pressure regulation, and/or converter clutch apply.The Sonnax drop-in signal accumulator piston kit 154740-06K allows bores to be reconditioned quickly and easily with no reaming required. The hydraulic integrity of the VFS signal pressure circuits are re-established, and future wear prevented with positive sealing and wear resistant components.Hardcoat anodized aluminum piston combats premature wearAnnular grooves to reduce wear rateHighly wear-resistant sleeve to prevent future wearPositive sealing O-ringed plug prevents leakage in already worn boresMating spring to re-establish OE dampening actionDrop-in Zip Valve™ parts install quickly and easilyContentsSleeves (4)Pistons (4)Springs (4)O-Rings (6) 2 ExtraEnd Plugs (4) A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important Information As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Shipping Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. Returns 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply Core Policy If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items 8L45, 8L90 Signal Accumulator Piston KitSonnax Part No. 154740-06KIncludes 4 piston sets which fit any of 7 locations.GM 8L45 and 8L90 transmissions often suffer burnt clutches, shift concerns, low line pressure and/or converter apply complaints due to excess wear in the signal accumulator piston bores in the control solenoid valve body casting. This wear allows valuable VFS signal pressure to exhaust, preventing proper shift control, line pressure regulation, and/or converter clutch apply.The Sonnax drop-in signal accumulator piston kit 154740-06K allows bores to be reconditioned quickly and easily with no reaming required. The hydraulic integrity of the VFS signal pressure circuits are re-established, and future wear prevented with positive sealing and wear resistant components.Hardcoat anodized aluminum piston combats premature wearAnnular grooves to reduce wear rateHighly wear-resistant sleeve to prevent future wearPositive sealing O-ringed plug prevents leakage in already worn boresMating spring to re-establish OE dampening actionDrop-in Zip Valve™ parts install quickly and easilyContentsSleeves (4)Pistons (4)Springs (4)O-Rings (6) 2 ExtraEnd Plugs (4)

Price: 66 USD

Location: Shepherdsville, Kentucky

End Time: 2023-12-25T20:33:22.000Z

Shipping Cost: N/A USD