Fusor 129 2-Part Fast Controlled Flow Seam Sealer (7.1 oz.)

Description: Fusor 129 controlled flow sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams. Fusor 129 seam sealer is fast curing and bonds extremely well to painted and two-component primed surfaces. Sealer can be applied directly to bare metal on rigid joints, however flexible joints, such as roof seams and drip rails, should always be primed. Features:High performance - provides excellent adhesion to bare or primed surfacesVersatile, bonds to epoxy or urethane two-component primed surfacesWeld through with minimal burn back, tolerates 4 deg F (24 deg C) powder coating cure for 3 minExcellent appearance easily duplicates factory appearance provides extremely flexible seal with no shrinkage, cracking or saggingProvides extremely flexible seal with no shrinkage, cracking or sagging, applies in smooth continuous beads with no gun linesEnvironmentally-resistant - provides excellent corrosion protectionEasy to finish, can be tooled, but is not required for factory look, cured sealer may be sanded to a feather edge

Price: 68.61 USD

Location: Denver, Colorado

End Time: 2024-01-19T21:21:19.000Z

Shipping Cost: 0 USD