For 93-03 VW EuroVan Trailer Hitch 4 Pin Wire 178" Ball Fits All Curt 4K 2" Tow

Description: This Trailer Tow Hitch + 4-Way Wiring + 1-7/8" Ball Fits The Following Vehicles: 1993 - 2003 Volkswagen EuroVan All Models This Trailer Tow Hitch + 4-Way Wiring + 1-7/8" Ball Includes the Following Parts: Class 3 Trailer Hitch, 2" Receiver (Easy Bolt-On, No Drilling) Multi-Function Taillight Converter Kit (Requires Splicing) Loaded Ball Mount with 1-7/8" Ball, Imported (2" Shank, 3,500 lbs., 2" Drop) Installation instructions, schematics, diagrams, and hardware (if required). List of Fitment Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 CURT 13217 Class 3 Trailer Hitch, 2-Inch Receiver Manufactured by: Curt Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans Each custom-fit class 3 hitch package is made for vehicle-specific mounting This particular kit fits certain years of the Volkswagen EuroVan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs GTW and 400 lbs TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs WD and 500 lbs WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component) Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.. Features: Rated to 4,000 lbs. gross trailer weight and 400 lbs. tongue weightCompatible with weight distribution hitch (5,000 lbs. WD / 500 lbs. WDTW)Engineered with a vehicle-specific design for a custom fitTested for safety in accordance with SAE J684Precisely welded for superior strength and fitProtected by a durable high-gloss black powder coat finishCo-cured in a rust-resistant liquid A-coat, inside and outEquipped with an open-back receiver for easy cleaningLimited lifetime warranty (one-year finish, one-year parts)Made in USA (may include imported hardware) CURT 59236 Weather-Resistant Multi-Function Splice-in Trailer Tail Light Converter Kit, 4-Pin Wiring Harness Manufactured by: Curt Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board This produces lower resistance, reduced heat generation, longer life cycles and higher reliability The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring The converter is controlled using a microprocessor that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector This package includes a powered converter wiring kit #55152 and four snap locks for faster, more secure splicing.. Features: Converts 2-wire, 3-wire or PWM ST system to 2-wire trailer light wiringPotted enclosure significantly increases water and vibration resistance4-way flat output connects tail lights, brake lights and turn signalsConstructed with SMT circuitry for better performance and durabilityMicrocontroller senses current to rapidly react to overloadProvides improved overload, short-circuit and thermal protectionLow-voltage operation allows function down to seven voltsColor-coded wires with wiring guide for easier installationIncluded wiring kit allows for a convenient connection to the vehicle batterySnap locks included for fast, secure splicingDust cover included to keep connector clean when not in use CURT 45834 Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Imported, Fits 2-Inch Receiver, 7,500 lbs, 2-In Drop Manufactured by: Curt When it comes to ball mounts, a CURT loaded ball mount is the complete package These stingers come with all necessary towing components and are pre-fitted with a factory-torqued trailer ball, eliminating the need to mount and torque your own trailer ball This means a loaded ball mount is ready for towing right out of the package! Each one also comes with a pin and clip for mounting the ball mount into the appropriate size receiver tube. CURT offers loaded ball mounts in a variety of styles and weight ratings This CURT loaded ball mount features a gross trailer weight capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. It comes with a 1-7/8" trailer ball, making it an excellent choice for towing most small boat trailers, utility trailers, popup campers and some recreational vehicle trailers used for hauling dirt bikes, motorcycles and ATVs (NOTE: Never exceed the lowest weight capacity of any towing component; i.e the vehicle, hitch, trailer, etc) This ball mount also has a length of 8-1/4", a drop of 2" and comes with a gloss black powder coat finish to resist rust, chipping and UV damage. All CURT loaded ball mounts feature 2" x 2" shanks and are made with the same superior quality we put into each of our products.. Features: Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weightFits trailer hitches with a 2" x 2" receiver tube openingFactory-torqued CURT trailer ball accepts a 1-7/8" coupler2" drop for precise trailer levelingHollow shank weighs less and can be used with an anti-rattle kitCNC-formed, robotically welded and mechanically descaled for a perfect fitProtected by a durable powder coat finishTrailer ball features a polished chrome-plated finish5/8" hitch pin & clip for secure mounting in receiver tubeLimited lifetime warranty (one-year finish, one-year parts) Hitches Near Me: We operate out of several warehouses across the country, ensuring faster delivery to your location. Order today or message us for expert advice and personalized service.

Price: 485.74 USD

Location: Eau Claire, Wisconsin

End Time: 2024-08-26T23:58:59.000Z

Shipping Cost: 0 USD