Fits Mustang II 1974-78 /Pinto 1974-80 Power Steering to GM Pump Hose Kit

Description: Complete your power steering setup with out Mustang II to GM Pump Powering Steering Hose Kit while saving valuable time and money, Features a 1974-78 Mustang II/1974-80 Pinto to GM Pump Power Steering Hose Kit and Speedway Mustang II Power Steering Flow Valve for GM Pump, High-pressure line is 16.5" w/ 90 degree fittings on both ends and the Low-pressure line is 24" w/ one 90 degree fitting, includes 3 flare inserts, Includes adapter to allow it to work with both metric O-ring and standard inverted flare threads on the power steering pump fitting, Not applicable to the Ford Thunderbird style reproduction steering racks 1974-78 Mustang II/74-80 Pinto Power Steering to GM Pump Hose Kit Sku # 91603044 Mfr. Part # 91603044 Condition New Brand Speedway Motors Sold Each Details Info Mustang II racks and GM pumps are a common setup in the hot rod world - but don't forget about the small parts needed to make that system work together for years to come. Save valuable time and money with our Mustang II to GM Pump Power Steering Hose Kit! Kit Contains: (1) 1974-78 Mustang II / 1974-80 Pinto to GM Pump Power Steering Hose Kit (1) Speedway Mustang II Power Steering Flow Valve for GM Pump Speedway Mustang II Power Steering Flow Valve for GM Pump It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Most who have tried it have found that the steering was twitchy or that it easily darts. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures the problem. For applications using the O-ring style power steering hoses. Installs in the back side of the pump. High-pressure line is 16-1/2" w/ 90 deg. fittings on both ends. Low-pressure line is 24" long w/ one 90 deg. fitting. Includes 3 flare inserts Features Includes adapter to allow it to work with both metric O-ring and standard inverted flare threads on the power steering pump fitting. Specs Speedway Mustang II to GM Pump Power Steering Hose Kit Hose ID: .43" Hose OD: .67" Fitting End A: High Pressure Line: 1/2"-20, Low Pressure Line: 5/8"-18 Fitting End B: High Pressure Line: 5/8"-18 Speedway Mustang II Power Steering Flow Valve for GM Pump 5/8-18 female thread 3/4-16 male thread O-ring 200-113(.103 x .562 id) used with 617648030 Application This Part Fits OEM 1974-1978 Mustang II & 1974-80 Pinto Rack only This hose kit will work with the suggested power steering pump 910-32908-BLK. When using an early GM pump with your OEM 1974-78 Mustang II/ 1974-80 Pinto power rack, the valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures problems of twitchy steering when these components are used together. Installation Tips Speedway Mustang II to GM Pump Power Steering Hose Kit When you have that used/salvage yard/donor OEM 1974-78 Mustang II / 1974-78 Pinto power rack, it is common to use an early GM power steering pump with an OEM 1974-78 Mustang II / 1974-80 Pinto power rack & pinion. This GM pump to OEM Mustang II/Pinto rack & pinion power steering hose assembly is an inexpensive alternative to the more costly stainless steel braided hose kits. The return hose included in this kit will normally need to be cut to length. Note: This hose kit is (NOT) applicable to the Ford Thunderbird style reproduction steering racks that are sourced or provided by Speedway Motors for the Mustang II front end application. If you have sourced or obtained your Thunderbird style Mustang II rack & pinion for your Mustang II front end build from Speedway Motors, this hose kit is (NOT) applicable and should not be purchased. For that application, please consider hose kit #s 910-32535 or 617-4835 when utilizing the Speedway Motors sourced Ford Thunderbird style reproduction rack & pinion for your Mustang II front end set up. When using an early GM pump with your OEM 1974-78 Mustang II/ 1974-80 Pinto power rack, the valve 910-32918 reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures problems of twitchy steering when these components are used together. Specs Sold in Quantity Kit Fitting End A High Pressure Line: 1/2"-20, Low Pressure Line: 5/8"-18 Hose OD 0.67 Fitting End B High Pressure Line: 5/8"-18 Hose ID 0.43 Notes Applicable to OEM Rack & Pinion Units Only MFG. Part # 91603044 Reviews 56 F100 Mustang IFS swap Rated by Larry 56 F100 on February 14, 2022 Summary: Fit well, Good quality I would recommend this Rated by Leo on February 06, 2022 Summary: Was exactly what I needed to hook up my Mustang II rack to my Chevy power steering pump. Pros: Everything fit perfectly Yes, I recommend this product. Related Items / Suggested Parts O-Ring to Inverted Flare Power Steering Adapter Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 94.99 USD

Location: Lincoln, Nebraska

End Time: 2024-12-27T13:02:23.000Z

Shipping Cost: 12.99 USD