Description: PLEASE STATE IN THE NOTES SECTION THE DIMENSIONS YOU WOULD LIKE YOUR ORDER CUT. Sold by the square ft. Multiply your width (inches) by your length (inches) required and divide by 144 to get the square feet. Round it up to the next square ft as again it is sold by the sq ft. PRICE IS FOR 12" x 12" piece. WE CANNOT SHIP ANY SHEETS LARGER THAN 36" LONG OR WIDE. Extren 525 fiberglass sheet. An all-purpose series utilizing a fire retardant premium polyester resin system with a UV inhibitor. Color: Slate Gray Sold by the square ft ie, 144 sq inches however can custom straight cut to shapes besides 12" x 12" up to 47" in length. Weight is 5 lbs a sq ft. We also have 1/8", 1/4" and 3/8" panels. If you are in the boating industry and need this for Groco valve backing plates we also have those available drilled and tapped similar to Groco BB1, BB2 and BB3. The Extren fiberglass is fire retardant and will char when exposed to fire but not hold a flame and is incredibly strong. In testing it does burn with a Map gas torch blasting it from an inch away and as soon as the torch was removed flame went out. For larger pieces and considerable savings please contact us through our web site at merimarine or dreamgreen. We do straight cuts at no charge so even a 3" wide by 47" long order is acceptable. We do offer custom cnc cut parts in 1/4", 3/8" and 1/2" thick fiberglass. See CNC listing at: https://www.ebay.com/itm/295398413108 Due to high shipping and labor costs and by nesting parts and reducing waste we can reduce costs for our customers by actually cutting their parts and shipping only what they need.Please review our other store listings for material costs and contact us for your requirements.1/2” thick listing https://www.ebay.com/itm/292664562904 3/8” thick fiberglass listing: https://www.ebay.com/itm/302828084801 1/4” thick listing https://www.ebay.com/itm/302828084798 Compression and tensile strength of 30 thousand PSI. This material offered is a structural material made in a large industrial process. Use it for making backing plates, mast base or steps, bow sprits, engine mounts, bulkheads, transom repair etc. Can be drilled and tapped. Please note that eBay calculates the shipping based on weight, and destination but for larger quantities the rates are often cheaper so we will automatically refund surplus shipping costs. Please do your calculations before you ask for a price. This price is for ONE square foot. If you are looking for large pieces, please multiply the length and width to obtain square feet needed. If you are measuring in inches, multiply the length and width and then divide by 144. (For example 48" x 36" equals 1728 square inches. Divided by 144 gives you 12 square feet) That will give you the square feet needed. We do offer substantial discounts for large quantities but please realize the possible cost before asking us for a price and check places like Grainger, ePlastics etc for a competitive price that we will always better.
Price: 45 USD
Location: Deltaville, Virginia
End Time: 2024-08-01T20:34:30.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Modified Item: No
Country/Region of Manufacture: United States
Custom Bundle: No
Non-Domestic Product: No
MPN: Does Not Apply
Brand: Extren 550
