Felt FR FRD Carbon Rim Brake Frameset ~ 56cm ~ BBinfinite Ceramitech SRAM DUB BB

Description: Buy with Confidence ~ FREE Returns(Note: Will ship either USPS, UPS or FedEx depending on Location) Felt FR FRD Carbon Rim Brake Frameset This is a Beautifully Maintained 56cm Frame with a $325.00 (invoice picture #4) BBinfinite Ceramitech SRAM DUB Bottom Bracket. Although it is a 2019 Model, I purchased it "New in the Box" in July of 2023. I got a good deal on it but it is a hair big for me - if this were a 52-54cm I would definitely not be selling it. I am the original owner and have washed it religiously every 2-3 weeks with ArmorAll Extreme Shield Ceramic Wash. The only blemish is a scratch near the bottom bracket from a dropped chain when I first got the bike and I immediately put a Chain-Catcher on it (see picture #18). The scratch does not affect performance and this part of the frame is Super Reinforced by the "1-piece" Bottom Bracket. *** I have done the following: *** 1. Thoroughly Cleaned and Re-greased the Headset, all you need to do is clamp your handlebars on. 2. Thoroughly Cleaned and Re-greased the Bottom Bracket, all you need to do is Install your SRAM DUB Crankset. 3. Gave it "2" coats of CERAKOTE Ceramic Spray, pour a little water on it and watch it bead away. 4. Cut and left the Rear Brake Line in the frame so you can use it as a "pull through" for your new brake line. 5. I am also including a Spare Rear Derailleur Hanger & Bottom Bracket Tools (Last 2 pictures). PLEASE NOTE: The front Brake is a Standard Mount (1-post) but the rear is a Direct Mount (2-post) and located under the bike behind the Bottom Bracket. This gives the bike a clean look in the rear and I honestly believe Direct Mount Brakes are as good as Disc Brakes. *** BBinfinite Bottom Bracket: *** Please see the invoice (picture #4) for Product Number and visit the BBinfinite website for more info on this specific model, but here is a summary: This is a solid, "one piece", Press-Fit Bottom Bracket. It not only Stiffens but gives a Smoother, Better ride and eliminates the possibility of Creaking that is sometimes common among 2-piece press-fits. Also, changing the bearing cartridges is easy with the one piece, simply remove the plastic endcaps and you can pop the old ones out. NOTE: When putting the plastic endcaps back, be sure to line them up properly to the internal Red Cylinder with your fingers. If not careful the cylinder can cut into the endcaps and cause a rubbing problem. Measured diameter of the brake lever clamp, measured in millimeters (*** Free Shipping - USA Only *** About Us We Typically Ship within 24 Business Hours and Operate in a Smoke Free Environment. If you are unhappy with any of our Products for Any Reason, contact us immediately and we will make it right.

Price: 1100 USD

Location: Danville, New Hampshire

End Time: 2025-02-03T20:26:06.000Z

Shipping Cost: 0 USD