FastenMaster Trapease Fastening System For Trex Fascia Read Description

Description: New Cortex Hidden Fastening System for Trex Transcend Fascia – 1-3/4 inch Cortex screws and plugs – Island Mist (50 LF). If you have any questions please feel free to contact me via ebay massage. Thanks See pictures for more details Product Details Cortex Fascia Trex screws and plugs – Transcend - Island Mist 1-3/4 inch Cortex screws and plugs – 50 LF Cortex Hidden Fastening System hides all fasteners in your fascia Model#: FMCTXF-TX50TSLM The FastenMaster Cortex Hidden Fastening System for Fascia is the fastest, easiest way to hide the heads of your screws when installing fascia or stair risers. Cortex plugs are made with the same material as Trex fascia boards, meaning you can achieve a perfect seamless finish across your whole deck. Once installed, Cortex plugs become a part of your fascia board, expanding and contracting along with the boards around them – this means your plugs will not need to be replaced for the lifetime of the project. Featuring a TORX ttap drive system and a high-strength setting tool – Cortex screws are easy to install and optimized for use by the PRO contractor. Using the included Cortex Fascia Counter-Boring bit, drill an oversized pilot hole – the bit leaves the perfect amount of space for both the screw and plug. Then, use the Cortex setting tool to drive the flat headed Cortex screw the perfect depth. Finally, place your Cortex plug in the screw hole with the grains aligned and tap to finish. FastenMaster recommends installing 3 fasteners every 18 inches on 12 inch fascia boards, and 2 fasteners every 18 inches on 8 inch fascia boards. Consult your board manufacturer's installation instructions before starting your project. Designed to fasten 50 lineal feet of Transcend Island Mist Fascia. Includes 100, 1-3/4 inch carbon steel Cortex fascia screws, 105 Cortex Fascia plugs, 1 Cortex Counterbore Tool, and 1 Cortex setting tool. Compatible with Trex Transcend Island Mist fascia 50 lineal feet of coverage – Includes 100, 1-3/4 inch screws, 105 plugs, 1 Cortex Counterbore tool and 1 setting tool Hides all fasteners in Trex fascia boards Cortex plugs are made from the same material as Trex fascia boards, creating a 100% perfect match every time Cortex screws are made from high-strength carbon steel The TORX® ttap® Drive System delivers a superior bit engagement for a stable wobble free installation The Cortex Counterbore tool is designed to create a perfect pilot hole for the screw and plug The Cortex setting tool is optimized for the PRO contractor – Stronger bit material and industrial grade felt will enable you to install 350 fasteners with one setting tool Cortex for Fascia was engineered to support the expansion and contraction of fascia boards over time

Price: 44.99 USD

Location: Laredo, Texas

End Time: 2024-01-15T00:44:16.000Z

Shipping Cost: N/A USD