Description: EDI LMA-1150-HV LOOP DETECTOR $ 98.99, BUY-IT-NOW, with free shipping * I WILL EVEN THROW IN A FREE BASE FOR MOUNTING THE LOOP DETECTOR ON A DIN RAIL * LMA-1150-HV (120Vac to 240Vac) Single channel with programmable single relay output. The DEFLECTOMETER® display helps optimize the proper sensitivity setting to detect all vehicles including motorcycles. NO MORE GUESS WORK WHEN SETTING SENSITIVITY! DEFLECTOMETER®: The front panel 7-segment LED DEFLECTOMETER® provides visual feedback and assistance for setting the correct sensitivity, reading the frequency of the loop, reporting Loop Faults, and indicating Delay & Extension Timing functions. Sensitivity Meter: With a typical size vehicle over the roadway loop, the DEFLECTOMETER® functions as a Sensitivity Meter. The optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons. Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles, including motorcycles and high-bed vehicles. Frequency Meter: Following power-up or reset, the DEFLECTOMETER® will indicate a 2 or 3 digit number (quickly flashes) that indicates the loop frequency of the loop & loop network. Keeping your loops separated by at least 5 KHz avoids crosstalk problems and future service calls. Ten (10) Levels of Sensitivity: 10 levels of sensitivity (0 to 9) can be easily set using the front panel UP or DOWN push buttons. LMA-1150-HV operates on 120VAC and 240VAC Advanced Loop Diagnostics: The Loop Fault Monitor continually checks the integrity of the loops and will report and store three types of loop faults; Open Loops, Shorted Loops, and 25% sudden changes in inductance. Loop Fault Memory: The Loop Fault Memory uses internal Non-Volatile memory to store and display the current and previous loop faults utilizing the front panel “Loop Fault” LED and DEFLECTOMETER®. A power loss or reset will not delete this memory. A MUST FOR TROUBLESHOOTING! Call Output Memory: The detector will not drop a Call state if power is lost for a minimum of 4 seconds or less. “Delayed” & “Extended” Detection: A 2-second CALL “Delay” time and 2, 5, or 10-second CALL “Extension” time can be provided.
Price: 98.99 USD
Location: Independence, Ohio
End Time: 2025-01-21T19:11:37.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: EDI Loop Detectors
Model: EDI LMA-1150-HV
MPN: LMA-1150-HV
