Description: 100% OriginalFair PricingFast ShippingBUY NOW!For orders to the EU of value over 150 EUR, please note that additional duty and handling fees may apply at destination customs. For purchases exceeding $200 USD, we kindly request either a valid tax identification number or the accurate phone number to facilitate import duty procedures. The European Union has enforced an import tax policy. DYS Aria F45A 4-in-1 ESC BLHeli_32 for FPV Quad mini Drone Race Free-Style DIY Specification Input voltage:3-5S Lipo BEC: 5V/3A & 9V/1.5A Size(mm)L*W*H:43*40*8（mm） Weight:19.8g(without battery wire) Cont Current(A):45A Burts Current(A)>10S:50A Features With 32bit ARM Cortex MCU STM32F051 48MHZ micro processor, throttle 2048 resolution ratio,strong anti-interference capacity. Built-in two BEC 9V / 1.5A and 5V/ 3A. The telemetry port and on-board current meter of the ESC can use the flat cable and it will test the current,voltage and power etc. Built-in temperature sensor will pass the telemetry port to transfer and overlay to the OSD of FC,It can be programmed setting for temperature protection. With USB linker can be programmable throttle setting like support positive and negative,two-way mode,FPV 3D mode,motor speed,braking ,PWM frequency, inlet angle speed setting, onboard RGB LED for customize color, Beep etc. It use the self-adaption control system,can go automatic with the all kind of the motor in the market,at the mean time it support up to 500HZ PWM,oneshot 125,oneshot 42,Multishot and Dshot 150/300/600/1200. With special optimize in multi-axis,the motor can launch smoother in a good throttle curve, fast response,great power, and highly support the multi-axis,fixed-wing and helicopter. Signal wire is the silicone flat cable,it can connect with the DYS F4 FC directly,no need soldering.When it connect with the other brand FC,it will need to solder to the FC. MCU hardware,Driver circuit ,Mosfet will come with double voltage protection. To adopt the new process MOSFET of low internal resistance, will help increase resistance to flow.Also,the professional MOS driver chip makes the best efficiency. Mosfet is covered with aluminum sheet for cooling,which can bring more efficiency and stability. With special process of 8 layer thicken PCB will lower resistance, small calorific value and bigger impact resistance current.Nice optimize layout of the components and parts makes a smaller size,lighter weight and easy to build. Payment Shipping Returns Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only. Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address. ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances. After receiving the item, contact us within : 30 Days Refund will be given as : Money back or item exchange (buyer's choice) Return shipping : Buyer pays return shipping100% OriginalFair PricingFast ShippingSpecification Input voltage:3-5S Lipo BEC: 5V/3A & 9V/1.5A Size(mm)L*W*H:43*40*8（mm） Weight:19.8g(without battery wire) Cont Current(A):45A Burts Current(A)>10S:50A Features With 32bit ARM Cortex MCU STM32F051 48MHZ micro processor, throttle 2048 resolution ratio,strong anti-interference capacity. Built-in two BEC 9V / 1.5A and 5V/ 3A. The telemetry port and on-board current meter of the ESC can use the flat cable and it will test the current,voltage and power etc. Built-in temperature sensor will pass the telemetry port to transfer and overlay to the OSD of FC,It can be programmed setting for temperature protection. With USB linker can be programmable throttle setting like support positive and negative,two-way mode,FPV 3D mode,motor speed,braking ,PWM frequency, inlet angle speed setting, onboard RGB LED for customize color, Beep etc. It use the self-adaption control system,can go automatic with the all kind of the motor in the market,at the mean time it support up to 500HZ PWM,oneshot 125,oneshot 42,Multishot and Dshot 150/300/600/1200. With special optimize in multi-axis,the motor can launch smoother in a good throttle curve, fast response,great power, and highly support the multi-axis,fixed-wing and helicopter. Signal wire is the silicone flat cable,it can connect with the DYS F4 FC directly,no need soldering.When it connect with the other brand FC,it will need to solder to the FC. MCU hardware,Driver circuit ,Mosfet will come with double voltage protection. To adopt the new process MOSFET of low internal resistance, will help increase resistance to flow.Also,the professional MOS driver chip makes the best efficiency. Mosfet is covered with aluminum sheet for cooling,which can bring more efficiency and stability. With special process of 8 layer thicken PCB will lower resistance, small calorific value and bigger impact resistance current.Nice optimize layout of the components and parts makes a smaller size,lighter weight and easy to build. ![DYS Aria F45A 4-in-1 ESC BLHeli_32] (https://cdn.shopify.com/s/files/1/0948/3076/files/20180711171731180__70749.1532486047.jpg?v=1533542626)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/Screen_Shot_2018-07-25_at_2.10.16_PM__74330.1532486062.png?v=1533542643)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/2018071216320683__29064.1532486048.jpg?v=1533542655) 100% OriginalBUY NOW!For orders to the EU of value over 150 EUR, please note that additional duty and handling fees may apply at destination customs. For purchases exceeding $200 USD, we kindly request either a valid tax identification number or the accurate phone number to facilitate import duty procedures. The European Union has enforced an import tax policy. DYS Aria F45A 4-in-1 ESC BLHeli_32 for FPV Quad mini Drone Race Free-Style DIY Specification Input voltage:3-5S Lipo BEC: 5V/3A & 9V/1.5A Size(mm)L*W*H:43*40*8（mm） Weight:19.8g(without battery wire) Cont Current(A):45A Burts Current(A)>10S:50A Features With 32bit ARM Cortex MCU STM32F051 48MHZ micro processor, throttle 2048 resolution ratio,strong anti-interference capacity. Built-in two BEC 9V / 1.5A and 5V/ 3A. The telemetry port and on-board current meter of the ESC can use the flat cable and it will test the current,voltage and power etc. Built-in temperature sensor will pass the telemetry port to transfer and overlay to the OSD of FC,It can be programmed setting for temperature protection. With USB linker can be programmable throttle setting like support positive and negative,two-way mode,FPV 3D mode,motor speed,braking ,PWM frequency, inlet angle speed setting, onboard RGB LED for customize color, Beep etc. It use the self-adaption control system,can go automatic with the all kind of the motor in the market,at the mean time it support up to 500HZ PWM,oneshot 125,oneshot 42,Multishot and Dshot 150/300/600/1200. With special optimize in multi-axis,the motor can launch smoother in a good throttle curve, fast response,great power, and highly support the multi-axis,fixed-wing and helicopter. Signal wire is the silicone flat cable,it can connect with the DYS F4 FC directly,no need soldering.When it connect with the other brand FC,it will need to solder to the FC. MCU hardware,Driver circuit ,Mosfet will come with double voltage protection. To adopt the new process MOSFET of low internal resistance, will help increase resistance to flow.Also,the professional MOS driver chip makes the best efficiency. Mosfet is covered with aluminum sheet for cooling,which can bring more efficiency and stability. With special process of 8 layer thicken PCB will lower resistance, small calorific value and bigger impact resistance current.Nice optimize layout of the components and parts makes a smaller size,lighter weight and easy to build. Payment Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only. Shipping Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address. ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances. Returns After receiving the item, contact us within : 30 Days Refund will be given as : Money back or item exchange (buyer's choice) Return shipping : Buyer pays return shipping100% OriginalFast ShippingFair Pricing Specification Input voltage:3-5S Lipo BEC: 5V/3A & 9V/1.5A Size(mm)L*W*H:43*40*8（mm） Weight:19.8g(without battery wire) Cont Current(A):45A Burts Current(A)>10S:50A Features With 32bit ARM Cortex MCU STM32F051 48MHZ micro processor, throttle 2048 resolution ratio,strong anti-interference capacity. Built-in two BEC 9V / 1.5A and 5V/ 3A. The telemetry port and on-board current meter of the ESC can use the flat cable and it will test the current,voltage and power etc. Built-in temperature sensor will pass the telemetry port to transfer and overlay to the OSD of FC,It can be programmed setting for temperature protection. With USB linker can be programmable throttle setting like support positive and negative,two-way mode,FPV 3D mode,motor speed,braking ,PWM frequency, inlet angle speed setting, onboard RGB LED for customize color, Beep etc. It use the self-adaption control system,can go automatic with the all kind of the motor in the market,at the mean time it support up to 500HZ PWM,oneshot 125,oneshot 42,Multishot and Dshot 150/300/600/1200. With special optimize in multi-axis,the motor can launch smoother in a good throttle curve, fast response,great power, and highly support the multi-axis,fixed-wing and helicopter. Signal wire is the silicone flat cable,it can connect with the DYS F4 FC directly,no need soldering.When it connect with the other brand FC,it will need to solder to the FC. MCU hardware,Driver circuit ,Mosfet will come with double voltage protection. To adopt the new process MOSFET of low internal resistance, will help increase resistance to flow.Also,the professional MOS driver chip makes the best efficiency. Mosfet is covered with aluminum sheet for cooling,which can bring more efficiency and stability. With special process of 8 layer thicken PCB will lower resistance, small calorific value and bigger impact resistance current.Nice optimize layout of the components and parts makes a smaller size,lighter weight and easy to build.
Price: 59.99 USD
Location: Hong Kong
End Time: 2024-08-15T04:31:27.000Z
Shipping Cost: 15 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
MPN: Does Not Apply
Brand: DYS
