Digital 5V-30V Auto Probe Fuse Test Pen 12V Power Car Electrical Circuit Tester

Description: 【Powerful Circuit Tester】KAISAL automotive circuit tester is suitable for all automotive electrical systems from 5-30V. Such as polarity identification, voltage testing, fuse detection, testing LAN local area circuits, checking for bad grounding, tracing and locating short circuits, pulse signal testing, etc. This probe tester will help you trace problem wires easily and accurately. 【LED Digital Display and Test Bulb】 The auto electrical tester has a real time voltage display for a quick and accurate reading of the current voltage value. Also, the brightness of the bulb at the end of the circuit probe pen will change with the strength of the voltage so that you can quickly determine the fault of the circuit power supply. 【Polarity Tester & Frequency Prediction】 The car fuse tester quickly distinguishes between positive and negative polarity by the red and green colours of the built-in light emitting diodes. When the pen is connected to an AC signal of 5 to 30V, the frequency range can be estimated by the digital screen display. It can be used to measure fuel injector signals, spark plugs, crankshaft sensor signals, etc. 【Three Working Modes】 The circuit test light pen is designed with a switch and a 12V 5W test bulb, so you can easily change the working mode you want. You can choose the LED digital display and the bulb to work at the same time, or you can choose one of them to work to test the voltage and diagnose the faulty battery or fuse circuit accurately. 【Easy to Use & Wide Application】The digital voltage tester with large and strong alligator clip for easy one hand operation. sharp stainless steel probe with protective rubber tip for piercing wires, also for hard to reach tight areas.the car tester widely used in voltage tester, car fuse tester, automotive battery tester, probe tester, perfect for a variety of cars, trailers, vans, RVs, motorcycles, boats, etc. Precautions When Using 1.When the lamp is removed or burned out after the probe,the probe should not be close to the high-voltage line to avoid the LED light breakdown by high voltage 2.When testing 24 V vehicles,the 24 V probe light should be replaced,and each auto repair shop has stocks. 3.Do not measure the input and output signal lines of the computer without removing the back light of the pen, otherwise there will be trouble can damage the internal components of the computer. 4.When measuring the plug terminal,do not force the probe into the terminal to avoid deformation of the terminal shrapnel

Price: 18.99 USD

Location: Bordentown, New Jersey

End Time: 2024-09-02T06:05:37.000Z

Shipping Cost: 0 USD