DC97-14486A DC96-00887A Dryer Heating Upgrade Element Fit for Samsung

Description: DC97-14486A Dryer Heating Element Upgrade OEM DC96-00887A,Fit for Samsung Dryer dv45h7000ew/a2 dve50r5400v/a3 dve50r5200w/a3,Replace DC97-14486D AP4342351 (with DC32-00007A DC47-00016A) Perfect Replacement: ✔DC97-14486A replacement part numbers DC97-14486D,DC97-08891A,AP4342351, AP4452178,EAP2432265,1795935, 1548087,W10222771,AH2366820,EA2366820,PS2366820,PS2432265,PS4220205,DV210AEW,DV218AEB,DV337AER,DV410AEW, DV419AEU/XAA; ✔DC96-00887A replacement numbers PS2038484, AP4207819; ✔DC47-00016A replacement numbers AP4201894, PS2038378; ✔DC47-00018A replacement numbers PS2038383, AP4201898, AP4201899, 35001092; ✔DC32-00007A replacement numbers PS4204984, AP4201716. Compatible Model: The DC97-14486A dryer heating element assembly is compatible with samsung dryer DV45H7000EW/A2 DVE50R5400V/A3 DVE50R5200W/A3 DV40J3000EW/A2 DV42H5000EW/A3 DV42H5200EP/A3 DV48H7400EW/A2 DV42H5200EW/A3 DVE50M7450W/A3 DV48H7400EW/A2 DV45H7000EW DV42H5200EF DV42H5200EP DV42H5200EW,etc, some amana,seas,kitchen-aid and roper dryers. Designed for specific dryer models manufactured by Samsung. Your safe choice! Package Includes: The DC97-14486A dryer heating element assembly replacement part Includes DC47-00019A Dryer Heating Element，DC47-00018A Thermal Cut-Off Fuse，DC96-00887A and DC47-00016A Dryer Thermal Fuse Thermostat and DC32-00007A Dryer Thermistor Temperature Sensor. High-quality And Durable: The heating element of the dryer is made of high-quality materials and has been fully tested by our manufacturer. The upgraded DC96-00887A adopts Samsung original accessories, which is more reliable and durable although it is more costly. The nickel-chromium content is 60% higher than that of other ordinary replacement parts, and the length of the heating wire is 25% longer than that of other ordinary replacement parts, so the resistance is also increased by 25%. After-sales Service: If you have any questions or need help, feel free to email us, and we will show our professional and customer service attitude. Product DescriptionPACKAGE INCLUDES: 1 x DC97-14486A heating element Includes:DC47-00019A Heater partDC96-00887A OEM Thermal FuseDC47-00018A High Limit Thermostat1 x DC32-00007A Thermistor Replacement Part For Numbers: AP4201716, AP6008688, PS4204984, PS11741828, WP35001191, 2068429. 1 x DC47-00016A thermal fuse Replacement Part For Numbers: AP4201894 and PS2038378 2 x heating wire Made of high-quality conductive metal materials and insulating materials, it will not break and leak after repeated use, thereby increasing the safety of use. DC97-14486A dryer heating element assembly works with the following models: Precautions before installation: Wear work gloves to protect your hands.Before starting repairs, disconnect the power to the dryer.Before installing the kit, clean the dirt and fluff inside the dryer. If the dirt is not cleaned up, it may cause a fire in future use.Be sure to check whether the connection is tight during installation. If it is not tightened, the contact may be poor and the dryer will not work.Reminder: Watching YouTube videos can make installation easier.SIEP 1 Shut off the power to the dryer before working on it.Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame.Remove these four screws.STEP 2 Open the door of the dryer,there will be two screws that need to be removed at the bottom of the door frame area.With those two screws removed you should be able to tilt the front panel forward,remove the connector to the door switch, and remove the front panel.STEP 3 The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat.Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.STEP 4 To re-install the heating element you will need to put everything back in the reverse order. To test the heating element,you will need an Ohm meter or multi-meter.A good heating element should read approximately 9-10 ohms.A burned out element will have an infinite resistance,it won’t register anything.Note: These dryer replacement parts are compatible accessories (not original), and any brand names and any related model names mentioned above are only used to prove their compatibility. It is a direct and perfect substitute, and its appearance, installation and working methods are similar to the original parts.

Price: 39 USD

Location: McKees Rocks, Pennsylvania

End Time: 2024-11-23T07:09:53.000Z

Shipping Cost: 0 USD