Daikin 4MXS36WMVJU9 36000 BTU Configurable Quad-Zone Heat & Cool Split System -

Description: The Daikin MXS Series of outdoor compressors offer a heating operation range from 5°F up to 60°F and a cooling range from 14°F to 115°F. The MXS Multi-Zone Series also includes an enhanced drain pan. The new drain pan offers excellent drainage to reduce ice build-up in extreme conditions. It is also compatible with the Daikin Cloud WiFi Adaptor (not compatible with FDMQ or Vista indoor units) for complete comfort control from anywhere with your tablet or smart phone! A multi-zone mini split system is an excellent way to add air conditioning to more than one area of your home or office without running ducts everywhere. Each indoor unit operates independently so you can cool one room to 68°F, for example while another space may be set to 74°F. Whether you have just added an additional room or don't have central air, with the 4MXS36WMVJU9 Multi Zone Mini Split System you simply choose two indoor units based on your individual needs and before you know it, you will have cooling and heating in your space when and where you want it. The MXS multi-zone system, with inverter technology, works with several combinations of indoor unit styles and BTUs. Total comfort control with added savings! A variable speed compressor is designed to deliver the capacity required depending on the conditions in the room or rooms you are heating or cooling. Additionally, inverter technology reduces energy consumption up to 30% compared to a traditional fixed speed compressor. The inverter compressor will continue running at lower or higher speeds as needed as opposed to shutting down and restarting as needed like a traditional compressor. This results in minimal temperature fluctuations, providing continuous comfort levels. The 4MXS36WMVJU9 works with wall mounted units including the CTXS and FTXS Standard units as well as the FTXR Emura Series Wall units. FFQ Ceiling Cassette units, CDMQ and FDMQ Concealed Ducted units, and FVXS Floor units are also compatible with the MXL Series multi-zone systems. Depending on the indoor units you choose, with the 4MXS36WMVJU9 outdoor unit you will be able to achieve energy efficiency levels of up to 20.6 SEER, up to 11.8 EER, and up to 9.7 HSPF, in non-ducted installations. Ratings in ducted installations are lower. Comfort control with added savings! With Daikin's quad-Zone solution, any four rooms can be controlled individually. The 4MXS36WMVJU9 quad-Zone is rated for 36,000 BTU Cooling Capacity and must be connected to a minimum of two indoor units. Additional units (3 or 4) do not have to be added right away - they can always be added at a later date. The combined BTU ratings of the units chosen can total up to a maximum connected BTU rating of 48,000 BTUs. With the technology that allows for higher connectivity, the Daikin 4MXS36WMVJU9 gives you the opportunity to connect four units with cooling capacities totaling 48,000 BTUs. This higher connectivity capacity gives the consumer more leeway with regard to the indoor unit options. It allows you to address higher load requirements used in different types of spaces such as living and sleeping spaces. Based on the square footage of the rooms you are conditioning, you may need two 9,000 BTU units, a 12,000 BTU unit and an 18,000 BTU unit. With the 4MXS36WMVJU9 outdoor unit, connecting these four units won't be a problem. The system will adjust and allocate the required BTUs needed in each area up to the total of 36,000 BTUs. Assuming all four units were running at the same time, the 9,000 BTU units would run at 6,200 BTUs, the 12,000 BTU unit at 8,700 BTUs and the 18,000 BTU unit at 14,900 BTUs. If fewer than four zones are running, the system will adjust accordingly. The 4MXS36WMVJU9 outdoor inverter "variable speed" compressor features a space-saving design and quiet operation. Once you set your temperature, the system will automatically adjust output according to the condition requirements. With Quick Warming Function, your compressor preheats to shorten the time required for warm air discharge. It uses R410A refrigerant, the industry standard. It also includes anti-corrosion treatment of the outdoor Heat Exchanger Fin. General Features Number of Zones: 2 - 4 Maximum Number of Indoor Units: 4 Max. Connected Outdoor BTU Capacity: 48000 Refrigerant: R410A Compressor: Inverter Energy Star: Yes Outdoor Unit Noise Level (dBA): 54 Dehumidification (pts/hr): NA Includes Heat Pump: Yes Performance Data (NON-DUCTED) Cooling BTUs (Non-Ducted): 36000 EER2 (Non-Ducted): 9.2 SEER2 (Non-Ducted): 18.1 Heat Pump BTUs (Non-Ducted): 36000 COP (Non-Ducted): 3.89 HSPF2 (Non-Ducted): 9.4 Performance Data (DUCTED) Cooling BTUs (Ducted): 24000 EER2 (Ducted): 8.0 SEER2 (Ducted): 14.9 Heat Pump BTUs (Ducted): 36000 COP (Ducted): 4.27 HSPF2 (Ducted): 7.8 Features Inverter Technology: Yes Connectivity: Module Available (Optional) Piping / Line Set Requirements Line Set Liquid Line: 1/4" (4) Line Set Suction Line: 3/8" (1); 1/2" (2); 5/8" (1) Pipe Length (No Addl Refr Req): 131.6 Max. Pipe Length (ft.) Per Zone: 82 (Per Zone) Max. Height Difference (Indoor / Outdoor) (ft.): 49.25 Operating Range Ambient Temperature Range - Cooling: 14°F - 115°F Ambient Temperature Range - Heating: 5°F - 60°F Min. Outdoor Temp for Heat °F: 5 Weights and Dimensions Width (in.): 34.25 Depth (in.): 12.625 Height (in.): 28.938 Weight (lbs.): 139 Electrical Requirements Voltage: 208-230V Amps: 23.9 Circuit Breaker Size (Amps): 25

Price: 3500 USD

Location: Little Rock, Arkansas

End Time: 2024-10-28T18:45:05.000Z

Shipping Cost: 0 USD