Crown CDi1000 2-Channel 70V Commercial Amplifier+Preamp Mixer w/Bluetooth+Mic

Description: Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Crown CDi1000 2-Channel 70V Commercial Amplifier+Preamp Mixer w/Bluetooth+Mic Click Thumbnails to Enlarge Condition and Warranty Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 6 YEAR MANUFACTURER Product Description Package Includes: (1) Crown CDi1000 2-Channel, 500w 2,4,8-ohm 70V/140V Commercial Power Amplifier Amp (1) Rockville PRE-70V 70V Stereo Preamp Mixer with 8 Zones, Bluetooth/Optical/Mic In (1) Rockville CH-MIC70 Push To Talk Commercial Gooseneck Paging Microphone w/Chimes Authorized Crown Dealer! Features: Crown CDi1000 2-Channel, 500w 2,4,8-ohm 70V/140V Commercial Power Amplifier Amp Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Switch-mode universal power supply. Intuitive front-panel LCD screen for quick, easy configuration. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available. Specifications: Channels: 2 Sensitivity (for full rated power at 8 ohms): 1.4V Rated Power Output (per channel @ 4 ohms): 500W Stereo Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted) THD: < 0.5% Damping Factor (20 Hz to 400 Hz): > 500 Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced Dimensions: 3.5" x 19" x 12.25" Weight: 22.0 lbs IEC Power Connector: 15A Includes: Pre-amplifier Remote Rack mount ears Power Cable FM Radio antenna How-to setup video Warranty Description: Introducing the Rockville PRE-70V 70V 8 zone Pre-amp mixer with Bluetooth and optical. This is the perfect solution for commercial audio applications. With 8 mono or 4 stereo zones with independent volume controls and lots of source playback options this will be your go-to 70V product for your next installation. This mixer/pre-amp is designed to work seamlessly with any 70V power amplifier up to 1,000 watts RMS in total (500 x 2 or 1000 x 1). There are 2 mic inputs with echo control (one with talk over function). You also get 1 RCA line input, 1 optical input, and an RCA line output. Each zone can have an unlimited amount of speakers wired in parallel as long as you do not exceed the power of the amplifier that is plugged into this. This model also includes a chime button so you can create a chime sound before making announcements. The PRE-70V series features Bluetooth audio streaming so you can play your favorite music or access a playlist right from your phone! This amp also features both USB and SD inputs allowing you to play audio stored on a USB thumb drive or SD Card. We also have convenient euro-block speaker terminals that make it super easy to install the wires even if the receiver is hidden in a corner. The terminals are detachable and once you connect your speaker wire to the terminal it just clicks into the receiver. Our goal with the PRE-70V is to make it possible for anyone to install 70 volt systems on their own without spending thousands of dollars on a contractor. This model makes it a breeze to connect many speakers and multiple external sources. We intentionally use common plugs like RCA and ¼" on our model to make this more universal and user friendly. With our unique design you can feel confident in your DIY ability when installing our commercial system! Wiring is simple: 1.Connect bare wire from the PRE-70V output and plug it to the input of your amplifier. 2.Connect bare wire from the output of your power amplifier back to the 70V input on the PRE-70V 3.Connect the 70V speakers to the speaker output on the PRE-70V What is 70 volt ? 70 volt systems are the number one choice for any application where you want to install multiple speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. If you were to use this PRE-70V with a 250 watt 70V power amplifier then you can install speakers that total close to 250 watts. It does not matter if it is 10 speakers that are 20 watts each or 25 speakers that are tapped at 7.5 watts each. You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at. When we say the word tap, what we are referring to are the selectors that many speakers in 70 volt have on them. For example, some speakers might have selectable options of 1.5w, 3w, 5w, 10w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. What this allows for is full customization of your sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 10 watts, the ones in the hallway at 3 watts and the speakers in the bathrooms at 1.5 watts. Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc. 70 volt systems allow you to run very long lines of speaker wire without signal loss. This makes it ideal when running long speaker leads. The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant. Applications: Restaurant Bar Café School Lounge Home (Multi-zone, Multi-room) Office Warehouse Features: Rockville PRE-70V 70V 8 zone Pre-amp mixer with Bluetooth, optical (Requires 70v power amplifier) 8 mono or 4 Stereo zones of speaker outputs - each zone has a separate volume control Built in Bluetooth audio streaming FM radio tuner USB input to play audio stored on a thumb drive (32gb max) SD card slot to play music stored on an SD Card (32gb max) Separate volume control for MIC1, MIC2, MP3, LINE1, Optical Echo control for the mic inputs with speed and repeat adjustments BASS and Treble control Detachable euro-block speaker output terminals for easy installation Chime button for making announcements Top quality aluminum panel with industrial grade knobs 4 segments signal level indication Inputs and Outputs: (1) Set RCA AUX input (2) Mic inputs RCA Line output Optical input Detachable euro-block speaker output terminals for easy installation (8 zones) Specifications: Compatible with any 70V amplifier that is up to 1,000 watts RMS in total (500 x 2 or 1000 x 1) Power Requirements: 120V / 50-60Hz A-Weighted Signal to Noise (@ 1W) -68.1dBA A-Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBA Frequency response: 49Hz to 14.9 Khz Frequency Response vs. THD+N (worst case across normal bandwidth 1W @ 8 Ohms: 0.89% Weight: 18.7 lbs. All About Your CH-MIC70: How To Set up Your CH-MIC70: What's In The Box: Microphone 30 Foot ¼" to ¼" cable Description: The CH-MIC70 is a push to talk gooseneck condenser paging microphone with built in chimes designed for commercial applications. It has a built in mic preamp to ensure it gets a strong and clear signal without distortion. It also does not require 48V phantom power because it has the pre-amp built in! Simply plug this into either a line level or mic level input of your mixer or receiver and you are good to go. This mic was designed by Rockville and works in the following way: 1. When you want to talk into the mic and make an announcement it will make a chime in sound and then you can make your announcement. 2. When you are done with your announcement you hit the mic out button and it will make a chime out sound and the mic will be muted. We also added a chime volume control that allows you to raise or lower the volume of the chime. You can turn the chime off by lowering the chime volume to 0. This mic has a great frequency range and great sound quality. Most people use it for announcements and speeches but you can even sing into the mic it will sound great. This mic has a flexible gooseneck making it perfect for conference rooms, churches, schools, restaurants, and other commercial applications. Lastly, the included pop filter enhances the signal by reducing the amplitude of the plosives in the speech making the output clean and balanced. Features: Rockville CH-MIC70 Push To Talk Commercial Gooseneck Microphone With Built-in Chimes Push mic in button to talk (mic will make a chime in sound) Push mic out button to stop talking (Mic will make a chime out sound) Chime volume control (Turn chime volume to 0 to turn chime off) Condenser mic with built in mic pre-amp so this does not require 48V phantom power Simply plug the mic into any mic input or line level input 1/4" output jack Flexible gooseneck stand Pop-filter included 30 ft. 1/4" cable included AC Powered 110v/60Hz Dimensions: 3.82" x 6.22" x 18.7" Weight: 1.32 lbs Specifications: Transduction method : Electret Polar pattern: Cardioid Type of microphone: Condenser Frequency response : 40Hz - 16kHz Sensitivity: -35dB+/-2dB Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 6 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: CDi1000+PRE-70V+CH-MIC70 Home / About Us / Contact Us / Returns / FAQ's Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Price: 1549.38 USD

Location: Inwood, New York

End Time: 2024-12-30T13:55:52.000Z

Shipping Cost: 0 USD