Description: Custom printed circuit board designed for the crossover of the Tarkus DIY speaker design by Paul Carmody. Take the guesswork out of crossover assembly, these boards make the assembly process quick and straightforward. This board measures 6.75" x 6.75" and features large solder pads and copper traces for great electrical connectivity. I had a small run of these PCBs made up on commission and I'm listing the left over's from that batch. Includes: 1x Crossover PCB for the Tarkus DIY speaker design. 4x 2-pin terminal blocks which accept up to 12 gauge wire. 4x Snap in PCB standoffs. 4x Mounting screws (screw finish may vary). Requires: Crossover components for the Tarkus speaker design. Compatible components designed to fit on this PCB, (others may work just compare the component dimensions): C1 - 8.2uF - Audyn Cap Q4 8.2uF 400V MKP Metalized Polypropylene Foil Crossover Capacitor C2a - 15uF - Audyn Cap Q4 15uF 400V MKP Metalized Polypropylene Foil Crossover Capacitor C2b - 50uF - 50uF 100V Electrolytic Non-Polarized Crossover Capacitor C3 - 12uF - Audyn Cap Q4 12uF 400V MKP Metalized Polypropylene Foil Crossover Capacitor C4 - 4.7uF - Audyn Cap Q4 4.7uF 400V MKP Metalized Polypropylene Foil Crossover Capacitor C5 - 125uF - 125uF 100V Electrolytic Non-Polarized Crossover Capacitor L1 - 0.35mH - Jantzen Audio 0.35mH 20 AWG Air Core L2 - 1.0mH - Jantzen Audio 1.0mH 18 AWG Air Core L3 - 0.20mH - Jantzen Audio 0.20mH 18 AWG Air Core L4 - 6.0mH - Jantzen Audio 6.0mH 18 AWG Air Core R1 (x2) - 10 Ohm - Dayton Audio DNR-10 10 Ohm 10W Precision Audio Grade Resistor R2* (x2) - 8 Ohm - Dayton Audio DNR-8 8 Ohm 10W Precision Audio Grade Resistor R3 (x2) - 9.1 Ohm - Dayton Audio DNR-9.1 9.1 Ohm 10W Precision Audio Grade Resistor R4 (x2) - 25 Ohm - Dayton Audio DNR-25 25 Ohm 10W Precision Audio Grade Resistor *(If using the older DX25TG09-04 tweeter the R2 resistors should be 16 Ohm) Assembly: Glue components to the correct positions on the board (hot melt glue works great). Secure inductors with non metallic cable ties. Solder components leads to the pads on the bottom of the board. Attach wires from input and drivers and mount crossover board.
Price: 15 USD
Location: Millbrook, Illinois
End Time: 2024-01-31T04:17:32.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Compatible Brand: Universal
Type: Crossover
Brand: Unbranded/Generic
