Description: Selling a batch of 88 pieces. https://www.digikey.com/en/products/detail/tensility-international-corp/54-00063/6206244 Digikey P/N: 839-1291-ND Industry Recognized Mating Diameter2.10mm ID (0.083"), 5.50mm OD (0.217")Actual Diameter0.079" (2.00mm ID), 0.224" (5.70mm OD)Number of Positions/Contacts2 Conductors, 2 ContactsInternal Switch(s)Does Not Contain SwitchMounting TypePanel MountMounting FeatureBulkhead - Rear Side NutTerminationSolderShielding-FeaturesMounting HardwareInsulation Color-Voltage - Rated48VDCCurrent Rating (Amps)6.5 AMating Length/Depth-Ingress Protection-Material Flammability Rating-Operating Temperature-10°C ~ 60°CContact Material - PlatingNickelBody Material-Includes3 pcs - 1 Connector, 1 Nut, 1 WasherHousing Material-Contact MaterialCopper AlloyThread SizeM11x1Body ColorSilver Ratings Operating temperature range: -10° to 60° C Flammability: UL 94 V-0 Materials 1. Insulator: PBT, black 2. Pin: copper alloy, nickel plated 3. Shell: brass, nickel plated 4. Spring contact: stainless steel, nickel plated 5. Spring contact collar: copper alloy, nickel plated 6. Solder tab: brass, nickel plated 7. Washer p/n 56-00001: cold rolled steel, nickel plated 8. Nut p/n 56-00000: brass, nickel plated Electrical Requirements Dielectric strength: 1 min @ 500 Vac Insulation resistance: 100 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less Mechanical Requirements Insertion force: 0.3-3 kgf Withdrawal force: 0.2-3 kgf Terminal strength: a static load of 150 gf shall be applied to the terminal for 15 seconds in any direction. Life cycle: 5000 mating cycles while maintaining less than100 mΩ contact resistance, 50MΩ insulation resistance minimum, and dielectric strength of 500 Vac for 1 minute withstand voltage. Soldering Solderability: 75% minimum coverage when terminals dipped 2mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C bath for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds Environmental Requirements Cold test: -25 ±3 °C for 48 hours without deformation Heat test: 70 ±2 °C, for 48 hours without deformation Humidity test: 40 ±2 °C, relati
Price: 100 USD
Location: San Francisco, California
End Time: 2025-01-17T03:43:19.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Tensility International Corp
Connector Style: jack
Number of Pins: 2
Number of Poles: 2
