Colorply Black Ebony Lumber wood turning bowls pen blanks 6 x 6 x 2 or other

Description: You are bidding on 1 Piece of Black Ebony ColorPly. This Piece is 6in X 6in X 2in. This material is made in Italy and is very easy to turn. polish and work with. This is great for Pens, Bowls, Bottle Stoppers, Any turned item. I can make any size you want up to either 2 inches thick, just ask need to stay with any 6" dimension. When this is gone, it's gone! Not being made any longer. Happy Bidding and Good Luck Technical InformationThicknessSizes 2 inch 6'' x 6''12'' x 12'' 6 x 12 x 2 is 5012 x 12 x 2 is $95 Just purchase the equivalent 6 x 6 x 2 to make up for the size you would like and email me, and Ill send an offer. Example if you want a 12 x 12 x 2 or 4 order 4 - 6 x 6 x 2. Email me... Basic Use COLORPLY® lumber is a decorative wood product that can be turned, shaped or sculpted. Artisans can use COLORPLY® to create an unlimited number of unique items such as: bowls, pens, handles, drawer and pull components, musical instruments, clocks, and picture frames.Composition COLORPLY® is produced by first selecting high quality Obeche logs from managed forests in Africa. Once harvested, the trees are rotary peeled and clipped into 25'' veneer leaves. They are then dried and stacked in preparation for dyeing. Dyeing is the key to the remarkable color consistency in COLORPLY®. The stacked veneers are submerged in a heated, pressurized vat which contains a water soluble dye. Once the dye has completely penetrated the veneer leaves, they are removed and dried. The veneer is now ready for gluing. Adhesive is layered between each leaf of veneer to create a stack. The stack is then laminated in a high pressure press to form a large rectangular block. The block is then sawn into slabs of COLORPLY® lumber. Usage and LimitationsSurface Preparation Use proper safety precautions such as eye and respiratory protection prior to working with COLORPLY® lumber. We recommend sharp tools and a dust collection system.Finishing COLORPLY® lumber can be stained and should be finished. The finishing steps required are similar to conventional lumber. First, sand the surface of COLORPLY® to achieve a smooth surface. Second, depending on the final finish, apply sealer coats. Finally, apply the top coats using standard wood finishes such as oil, lacquer, varnish, or urethane. Follow the finish manufacturer's instructions. Please refer to the limitations section of this sheet.Maintenance Because a top coat is required, the final surface must be cleaned and maintained in accordance with the recommendation of the finishing manufacturer.Storage and Handling Rough-cut or machine COLORPLY® soon after receiving it (especially larger/thicker pieces). Rough-cut pieces should be acclimated at least 48 hours prior to final machining and finishing. COLORPLY® not used within 48 hours must be wrapped in plastic to maintain moisture content. COLORPLY® should be stored in a completely supported flat position.Limitations Store according to the instructions above. COLORPLY® is not recommended for exterior use. Pigments are sensitive to ultraviolet light, and all woods will fade or change color with prolonged exposure to light. Certain pigments, such as pastel colors, are more sensitive to light and extra care must be used to protect them from UV exposure. A UV inhibiting finish is recommended. COLORPLY® lumber is not inert. It is sensitive to ambient atmosphere conditions such as temperature and moisture. It is essential that COLORPLY® be properly acclimated to atmospheric conditions prior to use. Because COLORPLY® is a lamination, it cannot be dried conventionally. THEREFORE, WE DO NOT WARRANTY AGAINST CUPPING, WARPING, OR SPLITTING. Particularly with thicker pieces, we do not recommend long term storage. After COLORPLY® has acclimated, use it as soon as possible.

Price: 30 USD

Location: Senoia, Georgia

End Time: 2023-11-17T12:39:17.000Z

Shipping Cost: 0 USD