Cold-Formed Steel Design by Helen Chen (English) Hardcover Book

Description: Cold-Formed Steel Design by Helen Chen, Wei-Wen Yu, Roger A. LaBoube Provides the latest AISI North American specifications for cold-formed steel design Hailed by professionals around the world as the definitive text on the design of cold-formed steel, this book provides descriptions of the construction and structural behavior of cold-formed steel members and connections from both theoretical and experimental points of view. Updated to reflect the 2016 AISI North American specification and 2015 North American framing standards, this all-new fifth edition offers readers a better understanding of the analysis and design of the thin-walled, cold-formed steel structures that have been widely used in building construction and other areas in recent years. Cold-Formed Steel Design, 5th Edition has been revised and reorganized to incorporate the Direct Strength Method. It discusses the reasons and justification for the various design provisions of the North American specification and framing design standards. It provides chapter coverage of: the types of steels and their most important mechanical properties; the fundamentals of buckling modes; commonly used terms; the design of flexural members, compression members and closed cylindrical tubes, and of beam–columns using ASD, LRFD, and LSD methods; shear diaphragms and shell roof structures; standard corrugated sheets; and more. Updated to the 2016 North American (AISI S100) design specification and 2015 North American (AISI S240) design standardOffers thorough coverage of ASD, LRFD, LSD, and DSM design methodsIntegrates DSM in the main body of design provisionsFeatures a new section on Power-Actuated Fastener (PAF) ConnectionsProvides new examples and explanations of design provisions Cold-Formed Steel Design, 5th Edition is not only instructive for students, but can serve as a major source of reference for structural engineers, researchers, architects, and construction managers. FORMAT Hardcover LANGUAGE English CONDITION Brand New Back Cover Updated to the latest AISI North American Specification for cold-formed steel design Hailed by professionals around the world as the definitive text on the design of cold-formed steel, this book provides descriptions of the construction and structural behavior of cold-formed steel members and connections from both theoretical and experimental points of view. Updated to reflect the 2016 AISI North American Specification and 2015 North American framing standards, this all-new Fifth Edition offers readers a better understanding of the analysis and design of the thin-walled, cold-formed steel structures that have been widely used in building construction and other areas in recent years. Cold-Formed Steel Design, Fifth Edition has been revised and reorganized to incorporate the Direct Strength Method. Reasons for the various design provisions of the North American specification and framing design standards are discussed and justified. It provides chapter coverage of steel types and their most important mechanical properties, the fundamentals of buckling modes, commonly used terms, the design of flexural members, compression members and closed cylindrical tubes, beam-columns using ASD, LRFD, and LSD methods, shear diaphragms and shell roof structures, standard corrugated sheets, and more. Updated to the 2016 North American (AISI S100) design specification and 2015 North American (AISI S240) design standard Offers thorough coverage of ASD, LRFD, LSD, and DSM design methods Integrates DSM in the main body of design provisions Features a new section on Power-Actuated Fastener (PAF) Connections Provides new examples and explanations of design provisions Cold-Formed Steel Design, Fifth Edition is not only instructive for students, but can serve as a major source of reference for structural engineers, researchers, architects, and construction managers. Flap Updated to the latest AISI North American Specification for cold-formed steel design Hailed by professionals around the world as the definitive text on the design of cold-formed steel, this book provides descriptions of the construction and structural behavior of cold-formed steel members and connections from both theoretical and experimental points of view. Updated to reflect the 2016 AISI North American Specification and 2015 North American framing standards, this all-new Fifth Edition offers readers a better understanding of the analysis and design of the thin-walled, cold-formed steel structures that have been widely used in building construction and other areas in recent years. Cold-Formed Steel Design, Fifth Edition has been revised and reorganized to incorporate the Direct Strength Method. Reasons for the various design provisions of the North American specification and framing design standards are discussed and justified. It provides chapter coverage of steel types and their most important mechanical properties, the fundamentals of buckling modes, commonly used terms, the design of flexural members, compression members and closed cylindrical tubes, beam-columns using ASD, LRFD, and LSD methods, shear diaphragms and shell roof structures, standard corrugated sheets, and more. Updated to the 2016 North American (AISI S100) design specification and 2015 North American (AISI S240) design standard Offers thorough coverage of ASD, LRFD, LSD, and DSM design methods Integrates DSM in the main body of design provisions Features a new section on Power-Actuated Fastener (PAF) Connections Provides new examples and explanations of design provisions Cold-Formed Steel Design, Fifth Edition is not only instructive for students, but can serve as a major source of reference for structural engineers, researchers, architects, and construction managers. Author Biography WEI-WEN YU, PHD, PE, is Curators Distinguished Professor Emeritus of Civil Engineering at Missouri University of Science and Technology and Founding Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures. He retired from the AISI Committee on Specifications in 2010 after 50 years of service. ROGER A. LABOUBE, PHD, PE, is Curators Distinguished Teaching Professor Emeritus of Civil Engineering at Missouri University of Science and Technology and Director of the Wei-Wen Yu Center for Cold-Formed Steel Structures. Dr. LaBoube is also an active member of the AISI Committee on Specification and Committee on Framing Standards. HELEN CHEN, PHD, is the Manager of Construction Standards Development at the American Iron and Steel Institute (AISI), and oversees the Standards Council program responsible for developing and maintaining all AISI standards approved by the American National Standards Institute. Table of Contents Preface ix Chapter 1 Introduction 1 1.1 General Remarks 1 1.2 Types of Cold-Formed Steel Sections and Their Applications 2 1.3 Metal Buildings and Industrialized Housing 7 1.4 Methods of Forming 13 1.5 Research and Design Specifications 15 1.6 General Design Considerations of Cold-Formed Steel Construction 21 1.7 Economic Design and Optimum Properties 26 1.8 Design Basis 27 1.9 Serviceability 35 Chapter 2 Materials Used in Cold-Formed Steel Construction 37 2.1 General Remarks 37 2.2 Yield Stress, Tensile Strength, and Stress–Strain Curve 44 2.3 Modulus of Elasticity, Tangent Modulus, and Shear Modulus 45 2.4 Ductility 45 2.5 Weldability 47 2.6 Fatigue Strength and Toughness 48 2.7 Influence of Cold Work on Mechanical Properties of Steel 48 2.8 Utilization of Cold Work of Forming 51 2.9 Effect of Temperature on Mechanical Properties of Steel 53 2.10 Testing of Full Sections and Flat Elements 54 2.11 Residual Stresses Due to Cold Forming 55 2.12 Effect of Strain Rate on Mechanical Properties 57 Chapter 3 Strength of Thin Elements and Design Criteria 59 3.1 General Remarks 59 3.2 Definitions of Terms 59 3.3 Structural Behavior of Compression Elements and Effective Width Design Criteria 61 3.4 Perforated Elements and Members 97 3.5 Direct Strength Method and Consideration of Local and Distortional Buckling 100 3.6 Plate Buckling of Structural Shapes 117 3.7 Additional Information 117 Chapter 4 Flexural Members 119 4.1 General Remarks 119 4.2 Bending Strength and Deflection 119 4.3 Design of Beam Webs 183 4.4 Bracing Requirements of Beams 209 4.5 Torsional Analysis of Beams and Combined Bending and Torsional Loading 216 4.6 Additional Information on Beams 216 Chapter 5 Compression Members 217 5.1 General Remarks 217 5.2 Column Buckling 218 5.3 Local Buckling Interacting with Yielding and Global Buckling 226 5.4 Distortional Buckling Strength of Compression Members 228 5.5 Effect of Cold Work on Column Buckling 228 5.6 North American Design Formulas for Concentrically Loaded Compression Members 230 5.7 Effective Length Factor K 234 5.8 Built-Up Compression Members 236 5.9 Bracing of Axially Loaded Compression Members 237 5.10 Design Examples 238 5.11 Compression Members in Metal Roof and Wall Systems 247 5.12 Additional Information on Compression Members 250 Chapter 6 Combined Axial Load And Bending 251 6.1 General Remarks 251 6.2 Combined Tensile Axial Load and Bending 251 6.3 Combined Compressive Axial Load and Bending (Beam–Columns) 253 6.4 Member Forces Considering Structural Stability 261 6.5 North American Design Criteria for Beam–Column Check 265 6.6 Design Examples 266 6.7 Additional Information on Beam–Columns 283 Chapter 7 Closed Cylindrical Tubular Members 285 7.1 General Remarks 285 7.2 Types of Closed Cylindrical Tubes 285 7.3 Flexural Column Buckling 285 7.4 Local Buckling 286 7.5 North American Design Criteria 289 7.6 Design Examples 293 Chapter 8 Connections 297 8.1 General Remarks 297 8.2 Types of Connectors 297 8.3 Welded Connections 297 8.4 Bolted Connections 316 8.5 Screw Connections 327 8.6 Power-Actuated Fasteners 331 8.7 Other Fasteners 334 8.8 Rupture Failure of Connections 336 8.9 I- or Box-Shaped Compression Members Made by Connecting Two C-Sections 337 8.10 I-Beams Made by Connecting Two C-Sections 340 8.11 Spacing of Connections in Compression Elements 342 Chapter 9 Shear Diaphragms and Roof Structures 345 9.1 General Remarks 345 9.2 Steel Shear Diaphragms 345 9.3 Structural Members Braced by Diaphragms 358 9.4 Shell Roof Structures 367 9.5 Metal Roof Systems 378 9.6 Shear Walls 380 Chapter 10 Corrugated Sheets 381 10.1 General Remarks 381 10.2 Applications 381 10.3 Sectional Properties and Design of Arc- and Tangent-Type Corrugated Sheets 381 10.4 Sectional Properties and Design of Trapezoidal-Type Corrugated Sheets 386 Chapter 11 Composite Design 389 11.1 General Remarks 389 11.2 Steel-Deck-Reinforced Composite Slabs 389 11.3 Composite Beams or Girders with Cold-Formed Steel Deck 390 Chapter 12 Light-Frame Construction 393 12.1 General Remarks 393 12.2 Framing Standards 393 12.3 Design Guides 406 Appendix A Thickness of Base Metal 407 Appendix B Torsion 409 Appendix C Formulas for Computing Cross-Sectional Property Details ISBN1119487390 Publisher John Wiley & Sons Inc Year 2019 ISBN-10 1119487390 ISBN-13 9781119487395 Format Hardcover Imprint John Wiley & Sons Inc Place of Publication New York Country of Publication United States Edition 5th DEWEY 624.1821 Pages 528 Series Wiley Custom Select Language English UK Release Date 2019-11-15 AU Release Date 2019-09-24 NZ Release Date 2019-09-24 Author Roger A. LaBoube Edition Description 5th edition Publication Date 2019-11-15 Replaces 9780470462454 Audience Professional & Vocational US Release Date 2019-11-15 We've got this At The Nile, if you're looking for it, we've got it. With fast shipping, low prices, friendly service and well over a million items - you're bound to find what you want, at a price you'll love! TheNile_Item_ID:135209826;

Price: 297.98 AUD

Location: Melbourne

End Time: 2024-12-21T03:42:36.000Z

Shipping Cost: 21.88 AUD