Description: 3d printed GI Joe Classified The Enemy Black Armored Vest Original Vest by figuregear.com The vest is sized to fit the Firefly/BeachHead Body. It will fit the GungHo body but it will be tight. It can fit the Trooper body but you would need to cool the vest until it was less flexible and use a small hand drill/pin vise to create a second hole. This is an unpainted 3d printed vest. It is very susceptible to UV light until it is coated with either a clear coat or paint. Please remember to protect it from sunlight until finished. Use a hair dryer to warm the vest so you can shape it on the figure. The vest needs to heated in order to connect the straps. Please handle with care. To shape the vest for the desired figure. Gently warm the vest in water (boil water and remove it from heat. Let cool a little) or with a hair dryer. CAREFULLY as to not damage the item or paint. Shape vest to figure and cool in ice water or glue the vest tabs to hold it in place. NO FIGURES OR WEAPONS ARE INCLUDED. ONLY THE VEST. All items are made and painted by hand. There will be differences and imperfections in each piece. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Weapons, heads, shields, and jet packs are made with resin that is slightly flexible. Most items have been coated with a primer that seals the item and may be minimally painted. The intention for my products is for the customizer to utilize and for the items to be further painted and detailed. However, for those of you that don’t paint, I try to have items with some detail painted. This is very time consuming, so these may be rare instances. All heads will need to be fit to your chosen body. Dremeling, putty, etc will be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. Thank you so much for considering a purchase! All hand-painted items present the chance of paint rub. Either the paint off the item or the paint off the item onto the figure. This isn't very common with the finish I use, but it has happened. Please handle the items with care. If placing a vest onto a figure and it needs to be shaped first, please warm it slowly with a hair dryer. Thank you!
Price: 17.99 USD
Location: Roseville, California
End Time: 2024-11-07T01:44:00.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Type: Does Not Apply
