Description: OPTICALLY TRANSPARENT LOW VISCOSITY EPOXY ADHESIVE PRODUCT DESCRIPTION: Clear-Bond 10 Transparent, Epoxy Adhesive, Rigid, Clear, Low Viscosity, Room Temperature Cure is a rigid, optically clear adhesive with a very low viscosity. Clear-Bond 10 Transparent, Epoxy Adhesive, Rigid, Clear, Low Viscosity, Room Temperature Cure is room temperature system an excellent choice for thin bond-line assembly and repair applications of prisms, lenses and other optic components. And its high strength makes this epoxy ideal for structural applications. Clear-Bond 10 Transparent, Epoxy Adhesive, Rigid, Clear, Low Viscosity, Room Temperature Cure exhibits excellent wetting and wicking capabilities which allows it to adhere strongly to glass, ceramics, metals and most rigid plastics. GENERAL PROPERTIES Appearance Transparent, clear Cure Type Room temperature or Heat cure Benefits High strength Perfect insulative properties Good resistance to salt solutions, mild acids and Alkalis and many other chemicals Mix Ratio by weight 100:11 / Resin:Hardener Operating Temperature -60 to 130 C Typical Applications Exhibits excellent wetting and wicking capabilities which allows it to adhere strongly to glass, ceramics, metals and most rigid plastics. Volume Resistivity 6.00e+13 ohm-cm UNCURED PROPERTIES: Viscosity @ 25 C 310 Thixotropic Index 1.0 Specific Gravity, mixed 1.16 Reactive solids contents, % 100 Pot Life 30 minutes CURE SCHEDULE: 5 minutes @ 100C 2 minutes @ 120C 1 minute @ 150C CURED PROPERTIES: Glass transition temperature (Tg), C 90 Hardness, Shore D 83 Refractive Index 1.54 Lap shear strength, psi 2150 (alum to alum, 24 hrs @ 25C) 2600 (alum to alum, 1 hr @ 65C) 3000( alum to alum, 4 hrs @ 65C) Dielectric Constant 4.3 @ Frequency 1000 Hz Dielectric Strength 16.1 kV/mm 410 kV/in GENERAL INFORMATION: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). HOW TO USE: 1) Carefully clean and dry all surfaces to be bonded. 2) Apply Clear-Bond 10 Transparent, Epoxy Adhesive, Rigid, Clear, Low Viscosity, Room Temperature Cure completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results. AVAILABILITY: This epoxy can be supplied in various different packages.
Price: 5.99 USD
Location: Providence, Rhode Island
End Time: 2024-02-06T19:46:58.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
MPN: Does not apply
Brand: Undisclosed
