Class B+ AIS Transponder KS200A+ (with wifi and N2K support)

Description: KS-200A Class B+ AIS transponder Reporting intervals are: Dynamic ship data: boats at < 2 kn: 3 minutes boats at > 2 kn: 30 seconds Static ship data (similar to class A): 6 minutes These intervals are the standard operation modes. Competent authorities, like base stations, can have influence on the reporting intervals (as they do with class A as well). Interval timing can be reduced down to 5 seconds in exceptional cases. There is no automatism to change the 30sec/3min dynamic intervals by the ship itself. Physical: -Dimension : 207mm (length) x 155.8mm (Width) x 50mm (Height) -Weight : 0.8kg Power: -Input: 10 ~ 35VDC -Power consumption 0,35A nominal , 2A peak Electrical Interface: -RS232 38.4kbaud bi-directional Environmental: -IEC 60945 (Cat C) -Operating Temperature: -25 to +55 KS-200A: GPS Receiver (AIS Internal) -IEC 61108-1 compliant Connectors -VHF Antenna connector PL259 female -GPS Antenna connector BNC female VHF Transceiver -Transmitter x 1 -Receiver x 2 (one time shared between AIS/DSC) -Frequency: 156.025 to 162.025 MHz in 25KHz steps -Output power 33dBm 1.5 dB -Channel bandwidth: 25KHz -Modulation modes 25KHz GMSK / AFSK -Bit rate 9600 b/s GMSK & 1200 b/s FSK -RX sensitivity <-107dBm at 20% packet error rate(Remark: dual programming MMSI: either by wifi or by USB_RS232 adapter)

Price: 250 USD

Location: default, default

End Time: 2024-12-16T19:56:59.000Z

Shipping Cost: 100 USD