Chevy S10 Xtreme License Filler Plate 1999-2004 Made in USA Reproduction L@@K

Description: Chevrolet S10 Xtreme Front Filler Plate PROUDLY MADE IN THE USA! SHIPS FROM THE USA! GET YOURS FAST! After careful consideration we have decided to lower our pricing on the S10 and Blazer filler plates. We have also cut shipping cost, to cover some not all of the shipping costs that will be incurred. NOTE - These items are printed with UV curing resin. Therefore the primer they ship covered in is NOT a permanent solution, nor do we recommend installing them on the vehicle before painting them as they can warp or continue curing and break. We do NOT cover them with a UV protectant paint as then they would need to be sanded before you could paint them with the paint of your choosing, and due to the intricacy of the lettering, this would take away from the quality of the item. These items have also been tested for durability, and just like any other ABS plastic, if too much pressure is applied they can be broken. We will NOT replace items due to improper installation, not painting before using, and installation by a professional is highly recommended. If you have any questions please ask before purchasing and we will be more than happy to assist! To fully understand the process of what goes into making these, after the 3d model was created and tested for proper fitment and sizing, then we can go into production mode. This takes our industrial size 3D printer in order to be able to print these in 1 piece. After they are printed, they have to be cleaned of excess resin, then final UV cured in our curing station. Then we sand them with 220 grit, and finish by hand, then prime them and cure them again. This way you get a plate that does not need any finishing. You just need to sand and final prime/paint for your needs. If I could charge less for these and stay in business I would. These plates are better than factory quality, then are not molded from another used plate, each and every one will come out exactly the same, exactly as pictured. Thank you in advance for supporting small business! Production time is 3-7 business days depending on order volume, these are made to order. These are high quality, not sub par reproductions. This item is made by resin 3D Printing. We use our custom blend of 3D Print Resin that is tough like ABS, to give the plate a strength similar to factory. The plate is approximately 3-4mm thick, which is the same thickness as the factory plate.We have used our filler plate off of our personal S10 Xtreme, and created this plate to factory specifications. The mounting points are exact, and the plate lines up perfectly as you can see in the photos. The curves, and shapes are exact to spec.This plate is printed and then we sand the plate with 220 grit, and prime it with a filler primer (color will be gray or black). We have other filler plate options available including Xtreme Blazer and also plates with the Xtreme cutout for airflow to the radiator, or for backlighting. Production time is 3-7 Business days depending on volume of orders. We keep diligent communication through out the process.We work diligently to get your order out as quickly as possible! Ships from the USA, made in the USA! Available on www.lucidmade.com You will not find these products anywhere else, and while there are other similar models available on the internet, we have tested them, and they do not compare in quality and testing to our models. These parts are plastic and can be broken, so be careful when handling. In our testing, we have drop tested, and also broken parts, and during our testing procedures, most breaks were able to be glued back together seamlessly. However we do urge you to take caution when handling, sanding and painting the parts not to drop them, or be too vigorous. THIS ITEM SHIPS INSURED AND SIGNATURE REQUIRED. IF ANY ISSUES ARISE CONTACT US WITH PHOTOS AND WE WILL TAKE CARE OF YOU. NO RETURNS ON CUSTOM MADE ITEMS, BUT SHOULD ANY SHIPPING DAMAGE OCCUR WE WIULL RESOLVE THE ISSUE ASAP. WE HAVE BEEN SHIPPING THESE WITH NO ISSUES.

Price: 118.5 USD

Location: Hudson, Florida

End Time: 2024-12-24T22:31:45.000Z

Shipping Cost: 12 USD