Cane Creek

CGOLDENWALL Cross Hatch Adhesion Tester Cross-Cut Tester Kit Multi-blade cutt...

Description: peration and user instruction: Placing the test piece on a tablet of sufficient hardness. Holding the handle of the program grid, keeping the multi-blade cutter perpendicular to the plane of the test piece. By using the uniform force, with the manner of not fibrillation and balance and 20-50mm/S cutting speed to draw. Rotating the test piece to 90 °, repeating the above operations, so as to enable to cut a grid lattice graphics. Brushing the two diagonals of grid lattice graphics by using the soft brush gently backward and forward each five times. The test should be taken at least in three different locations on the test piece. If the results of three positions are different, the test should be repeated in more than three positions, and record all results. If it need to replace the multi-blade cutter, use the screwdriver to unscrew the two screws on the cutter body and change the cutter, affix the edge of cutter to the handle, then tighten the screws. Note: All the incision should penetrate the coating, cut into the substrate but must not be too deep. If the coating is too thick and hard to penetrate in the substrate, then the test is invalid. However, it should be explained in the test report. In some special situation or special requirements, it must be compatible with the tape method for the final determination. The tape is generally 12.7mm wide translucent tape, back material is polyester film or cellulose acetate. Put the tape over the whole grid, then tear off it at the minimum angle, the result can be obtained according to the film surface by adhesive peeling area ratio. Package: 1 x Carrying case 1 x Cross Hatch Cutter & Handle 1 x 1 roll of 3M Transparent Tape Multi-blade cutter spacing: 1 +0.01mm, 2+0.01mm,3+0.01mm Multi-blade cutter addendum straightness: ≯ 0.003mm ≯ 0.006mm. Multi-blade cutter tooth tip width: ≯ 0.05mm. Cutter spacing and cutter types: 1mm and 2mm with 11 teeth, 3mm with 6 teeth. Temperature: 23 ± 2 ° C; Relative humidity: 50 ± 5%. Temperature: 23 ± 2 ° C; Relative humidity: 50 ± 5%. Wide Application: The instrument is mainly suitable for organic coating adhesion assay hatch, laboratory, the construction site and flooring inspection industry.

Price: 57.97 USD

Location: Brentwood, New York

End Time: 2024-10-16T22:17:45.000Z

Shipping Cost: 0 USD

Product Images

CGOLDENWALL Cross Hatch Adhesion Tester Cross-Cut Tester Kit Multi-blade cutt...CGOLDENWALL Cross Hatch Adhesion Tester Cross-Cut Tester Kit Multi-blade cutt...CGOLDENWALL Cross Hatch Adhesion Tester Cross-Cut Tester Kit Multi-blade cutt...CGOLDENWALL Cross Hatch Adhesion Tester Cross-Cut Tester Kit Multi-blade cutt...CGOLDENWALL Cross Hatch Adhesion Tester Cross-Cut Tester Kit Multi-blade cutt...CGOLDENWALL Cross Hatch Adhesion Tester Cross-Cut Tester Kit Multi-blade cutt...

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Color: Sliver

EAN: 0531622849550

ISBN: 0531622849550

Package Dimensions LxWxH: 11.97x8.19x3.19 Inches

Weight: 1.85 Pounds

Type: Does not apply

Brand: CGOLDENWALL

Recommended

Cgoldenwall Emergency Safety Eye Wash Station w/ Shower Combination s/s (NEW)
Cgoldenwall Emergency Safety Eye Wash Station w/ Shower Combination s/s (NEW)

$330.00

View Details
CGOLDENWALL 700W 7-10 kg/h Home Automatic Oil PressNuts Seeds Oil Presser
CGOLDENWALL 700W 7-10 kg/h Home Automatic Oil PressNuts Seeds Oil Presser

$460.00

View Details
CGOLDENWALL Large Range Lab Digital Analytical Balance Lab Precision Scale 3000g
CGOLDENWALL Large Range Lab Digital Analytical Balance Lab Precision Scale 3000g

$60.00

View Details
CGOLDENWALL 1inch Water Flow Meter 1" Digital Fuel Flowmeter Inline, 1" FNPT ...
CGOLDENWALL 1inch Water Flow Meter 1" Digital Fuel Flowmeter Inline, 1" FNPT ...

$30.08

View Details
CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter, SG-1550
CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter, SG-1550

$399.99

View Details
CGOLDENWALL Electric Grain Grinder 2000g | 3000W | Commercial Superfine Grinder
CGOLDENWALL Electric Grain Grinder 2000g | 3000W | Commercial Superfine Grinder

$466.99

View Details
CGOLDENWALL Turbine 1" Flow Meter w/FNPT Thread, Flow Rate Range 2.5-26GPM -OPEN
CGOLDENWALL Turbine 1" Flow Meter w/FNPT Thread, Flow Rate Range 2.5-26GPM -OPEN

$39.95

View Details
CGOLDENWALL Upgraded Oil Press Machine Automatic Oil Presser Cold Hot
CGOLDENWALL Upgraded Oil Press Machine Automatic Oil Presser Cold Hot

$219.00

View Details
CGOLDENWALL Precision Lab Scale 5000gX0.01g
CGOLDENWALL Precision Lab Scale 5000gX0.01g

$52.00

View Details
CGOLDENWALL Eye Wash Station Portable Eye Wash Kit for Emergency, Wall Mounted E
CGOLDENWALL Eye Wash Station Portable Eye Wash Kit for Emergency, Wall Mounted E

$21.06

View Details