CEESC Extra Large Cat Door (Outer Size 11"x9.8"), Weatherproof ABS Material

Description: CEESC Extra Large Cat Door (Outer Size 11"x9.8"), Weatherproof, White, ABS Material, 4-Way Locking Flap for Cats & Dogs up to 25.54 lbs4 WAY SWITCH MODE --- The pet door could be adjusted by the Red and Green switches with tabs to 4 modes: out only, in only, both in and out, and fully locked, easy control of your pet's in and outSIZE & APPLICATION --- Outer Size: 9.8" x 11" x 2.15"(W x H x D), Inner size: 7.9" x 8.7"(W x H), Cut-Out Size: 8.3" x 9.5" (W x H); fits doors and thin walls, for cats and doggie under 27.54 lbs and with a waist smaller than 24.8 inchesSAFE & THOUGHTFUL --- The transparent flap let pet see through the door. Exterior rain seal is for waterproof. Brush strip eliminates noise from the door closingEASY TO INSTALL --- Complete instructions included, make you easily install in windows, doors, cupboards, panels and walls etcEXCELLENT QUALITY --- Made of ABS material, weather-resistant, the surface is smooth and durableExtra Large Cat Door SpecificationsNote:Outer Size: 9.8" x 11" x 2.15"(W x H x D);Inner size: 7.9" x 8.7"(W x H);Cut-Out Size: 8.3" x 9.5" (W x H);Fit Cats up to 25.54 lbs （The waistline less than 24.8" );Material: ABS plasticColor: WhiteStyle: FlapWeight: 1.19 lbMake sure that the width and height(shoulder level) of the pet are inferior to the pet screen door, thanks.The depth of door/wall/window you are going to install to had better more than the depth 2.17", so as to screw in 8 screws from both sides easily.Package Includes of CEESC Extra Large Cat Door :1 X Large Cat flap door8 X Screws8 X Screw caps1 X Installation instructionsIf the cat door is too thick for the door, please use scissors or cutting machine to cut along the line in the width of the frame.Installion instructions1. Draw outline on the paper boardDraw the cat door frame on a paper board and cut it down.Note:You had better prepare these necessary tools first, pencil, ruller, electric saw, drill, screwdriver, double-side tape.2. Draw outline on the doorUse a pencil draw around the edge of the cut paper on the door you want to be fixed to.Note:Generally, average installation height is around 10-15 cm from the floor.3. Drill 4 corners for holesDrill 4 corners for thorough holes first with an electric drill.4. Cut out a tunnel holeCut out the tunnel hole with an electric saw starting at holes drilled.5. Put the cat door in the doorAfter the tunnel hole is cut out, it's better to wrap around it with a layer of wood skin. And if your hole is cutting a little big, it's quite neccessary.6. Cut down tunnel depth if necessaryIf the cat door is too thick for your door, use a scissors or cutting machine to cut down some part of tunnel along the line A or B. The cutting scale is about 2-4CM.7. Mount to the doorMount the cat door with double-side tape to the door. 8 screws have been provided for your use, tighten them with a screwdriver on both sides.Note:8 screws for 4 holes on both sides, screw them all in 2 sides as illustration shown above, please. These 8 screws are designed to work together, they are not short.

Price: 28.59 USD

Location: Bohol

End Time: 2025-01-16T04:38:26.000Z

Shipping Cost: 0 USD