CE Approved Cheetah GPS Lap Timer GLONASS Drag Timing Upgraded Training Racing

Description: Cheetah is a dual satellite system lap timer, working with GPS and GLONASS system at the same time. GPS + GLONASS allows your device to be pin pointed by a group of 55 satellites all across the globe. 10HZ/18HZ clocking frequency makes Cheetah as one of the most accurate timing device for riding. Features: With today's fastest 10Hz chip 1. 1.0M tolerance 2. The easiest way to use 3. Most accurate measurement of track, speed, and distance 4. 3 models for option: LAP, DRAG, SECTION 5. Huge backlit LCD display, perfect in strongest sun light and super 6. Fast real time display 7. 20 Hours continues logging & 2 hours charge time via USB Technical Data Battery type: NOKIA/BL-5C Net Weight: 120g Length of Line (GPS): 1.5M Size: 7.3cm *5.0cm*1.6cm Constant usage time: 20 Hours Duration of Charge: USB 2 Hours Preparation before Using 1. It is suggested to use it in open space without shelter of tall buildings and trees to ensure signal strength. 2. After opening CHEETAH, the chip starts to warm up and search forsatellite in the first 40 seconds. It will last for 40 to 120 seconds according to the signal strength until the signal on the screen no longer blinks. 3. After satellite finding finishes, run slowly for a few minutes to make the GPS signal accurate and steady. Description of Display and Buttons 1. Signal bar, it stops blinking when there is signal 2. Menu 3. Current time 4. Battery level 5. Battery jar 6. USB interface 7. Press and hold for 2 seconds to set the start point 8. Press and hold for 2 seconds to change between different menus 9. Press to start /end timing; Press and hold for 2 seconds to turn on /off the back light 10. Signal receiver Lap Menu To run laps, press and hold button "O" for 2 seconds until it shows LAP; Then press "Enter" button to start; Press "Enter" button again to end; You may need to define your start point by pressing and holding "UP" for 2 seconds; You can press "UP" and "DOWN" to review the data. Drag Menu To run drag times, press and hold button "O" for 2 seconds, until it shows DRAG; Then press "Enter" button to start; Press "Enter" button again to end; Make sure the car or motorcycle is 100% still during operation; You can press "UP" to review the data, and press "DOWN" to review the Speed Graph for initial 0~12 seconds. Abscissa axis: Stands for time (0-12 seconds) Vertical axis: Stands for speed Horizontal line: Stands for speed 100KPH(60MPH) Section Menu To run section, press and hold button "O" for 2 seconds until it shows seconds; Then stop your vehicle at your point A, press and hold "UP" for 2 seconds to define point A in your device, press and hold "DOWN" for 2 seconds to define your point B; After points set, press button "Enter" to start timing; Press "Enter" button again to end. You can press "UP" and "DOWN" to review the data. System Setting Menu To change your time setting, press and hold button "O" for 2 seconds, until it shows "System Setting"; If you know your time zone, please input the time zone, like "-08" for California; To change between KPH and MPH, press and hold button "O" for 2 seconds, until it shows "System Setting"; "Radius Setting", leave it unchanged; Notes: Set Radius to a smaller number when you find GPS counts more laps than your real ride. Or set the Radius number bigger when you find the GPS timer missed a lap. If you want to become distributor, the welcome page of this time is open for custom design; Package includes: 1* GPS Lap Timer+1* USB Line+1* Signal Line

Price: 165.68 USD

Location: China

End Time: 2024-12-16T08:52:24.000Z

Shipping Cost: 0 USD