Car Engine Intake Exhaust Valve Carbon Deposit Cleaning Machine Walnut Blaster

Description: What is Carbon Engine Cleaning ?In just 30-90 minutes, your engine could run like new.Our Carbon Cleaning machines have a remarkable cleaning capacity. With this advanced technology,developed over several years, hydrogen is passed through the air intake pipes, burning off up to 85% of the carbon deposits that prevent your engine from running smoothly. Why Carbon Cleaning ?Helps prevents running issues on engine problems, cleans carbon out of vital exhaust components like catalysts and diese/ particulate filters (DPF) and is idea/ to use in conjunction with a DPF regeneration for ultra DPF cleaning.Preventive engine cleaning enables you to restore engine parts rather than replacing them, thereby saving vehicle owners on costly parts.These problems result mainly from poor combustion, which stifles the engine.So before replacing your engine parts, try Carbon Cleaning. A dity engine as the result of carbon deposits is a huge threat to vehicle performance. AUTOOL HTS558 is a de-carbon device for intake valve cleaning, whose working principle is to blast the walnut media into the intake valve through high-pressure airflow. The carbon deposits on the valve and cylinder wall impacted down. The walnut media and carbon deposit mixture can be recycled through special joints.It can deeply remove the sticky carbon deposits on the intake manifold, intake valve and exhaust valve. Effectively solve the problems of unstable idling, insufficient air intake, insufficient power, and insufficient acceleration.Features:➤1.【Deep removal of carbon deposits】Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)➤2.【External air source】This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.➤3.【Built-in dust filter】It can separate the recovered walnut sand grit from carbon deposits for recycling.➤4.【Integrated design】The walnut sand grit can be sprayed and recovered simultaneously.➤5.【3 year warranty】For damage caused by non-human factors, we promise to resend parts for free • Deep removal of carbon depositsDeeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.) • Can work with external air sourceThis allows the walnut sand grain to hit the carbon deposits more strongly and efficiently.(The air pump pressure should be more than 0.7 MPa (7 bar / 102 PSI)). • Built-in Dust FilterIt can separate the recovered walnut sand from carbon deposits for recycling. • Recycle sand design, save effort and moneyJoin spray gun:for spray powder Recycle hose:for recycled sandWhen the sprayed walnut sand hits the ground and deposited, the walnut sand particles are recycled in the system at the same time recycled in the system at the same time, without manual recycling, saving time and effort. Operation Steps STEP 1Open the top cover of the AUTOOL HTS558 and pour in the walnut powder (2-4 kg), press the dust cover onto the walnut powder and close the cover. STEP 2Connect the mouth of the spray gun to the recycling hose (there is a hole on the recycling hose). STEP 3Remove the engine intake manifold, insert the ignition gun into the intake manifold, turn the crankshaft to close the intake valve. Connect the air pump (not included) to the HTS558. STEP 4Connect the mains power, start the cleaning process. The process should take 1-3 minutes (depending on the carbon deposit). Normally the walnut powder can be reused 5-10 times. Recommend:1.Air pump pressure should more than 0.7Mpa (7bar/102PSI)2.Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)3.Cleaning time between 1-3 minutes Specifications Application: All vehicles Rated voltage: 110V Nominal frequency: 50/60 Hz Nominal power: 1200W Capacity: 13L Vacuum suction:0.02 MPa Air flow: <300L / min Package dimensions: 400 x 490 x 540 mm Weight: 10kg Package include:1x AUTOOL HTS558 unit;2xwalnut shell(2kg);2x spray gun;1x safety glasses;1x recycling hose;1x recycling hose and spray gun connection

Price: 358.99 USD

Location: Bordentown, New Jersey

End Time: 2024-08-25T06:42:44.000Z

Shipping Cost: 0 USD