CAFL-47 Blue Laser Kit High Power 4.5 Watts CONTINUOUS DUTY CYCLE 445nm (368)

Description: Meet the CAFL (Compact Arse Freaking Laser), the smaller version of the BAFL (Big Arse Freaking Laser). High-Power 4.5 Watt Laser Device Kit - Precision Crafted for Enthusiasts. Comes with a new battery. Superior Run Time Duty Cycle: This laser can be run indefinitely at full output without overheating. Dive into the world of high-powered lasers with our Custom-Made 4.5 Watt Blue 445nm Nichia NUBM47 Laser Device Kit. Engineered for the aficionado, this kit is not just a tool but a masterpiece of craftsmanship. Each component is meticulously selected for its quality and durability, featuring robust brass, copper, and aluminum construction. Regulatory and Safety Information: Compliance and Assembly: Sold as a kit to adhere to federal regulations, it's designed for straightforward assembly without the need for specialized tools. If you have any questions, we're here to assist. The laser is shipped with the laser lens portion of the unit removed. Without the lens to collimate the laser light, the light emissions from the unit are not harmful. By assembling the unit and focusing the laser light into a beam, the user takes full responsibility for the use of the device. Please Note: This is a high-power laser device, not a ?laser pointer?. It exceeds the standard power limit for laser pointers and is intended for users who understand and respect its capabilities. Tested with nearly 1 watt of optical power, this device is NOT a toy or a normal laser pointer. Never aim the beam at any living creature, aircraft, another person's property or anything you shouldn't! Buyer assumes all responsibility for the operation and ownership of this device. Always wear protective laser goggles rated specifically for the wavelength of this device. Even with goggles, NEVER look directly at the beam. Be cognizant of pointing the beam at objects that may reflect the light back at you or another undesired direction. IT WILL BURN!! Be careful pointing the beam, even briefly, at anything flammable or that can be damaged by heat even if the object is at a distance of dozens of yards/meters away. Do not leave the device powered on and unattended. Do not underestimate how quickly the beam can heat an object in a very short amount of time. Eye Safety: It is absolutely essential that proper laser safety goggles are used for viewing the laser beam spot at close ranges (even 20 feet away can be too bright for the naked eye). Use CE OD4+ safety goggles rated for the light wavelength of this laser device. Be careful of fake safety goggles. Look for a CE rating and the specifications printed on the lens of the goggles. Good goggles don't have to be expensive and just because they're expensive doesn't mean they're good. Laser Device Specific Information: Optical Power: Proven with 4.5 watt of optical output through the lens as tested using my calibrated optical laser power meter. See pictures for the exact power of this specific laser device. Laser Device Body - Precision Engineered for Maximum Performance The body of our Laser Device is more than just a shell; it's the result of a transformation from a standard flashlight unit into a marvel of engineering. Each body is skillfully machined using precision metalworking tools, including a lathe and milling machine, to carve out space for the substantial copper and aluminum heatsink. This meticulous custom process is not just about aesthetics; it's about creating a robust home for the heatsink that is crucial for managing the device's formidable power. Maximized Internal Space: We prioritize internal real estate for the heatsink, ensuring that every millimeter is optimized to accommodate the extensive cooling system. This design philosophy allows the device to operate at peak performance without compromising on power or safety. Custom Machining for Enhanced Durability: By customizing each body through precise machining, we ensure that the device is not only capable of handling intense power but also built to last. The result is a Laser Device that stands up to the demands of maximum output use with ease and reliability. Unmatched Thermal Performance: The heart of this device is a large solid copper capsule, enveloping the laser diode for optimal cooling. It's built not just to perform, but to impress. Main Power Tail Switch Assembly: The high-current switch is mounted on a thick PCB. A heavy gauge phosphor bronze spring is reinforced for greater current handling using braided copper wire. This process keeps the spring from overheating and ensures reliable operation under high loads without compromising durability. The entire switch unit is removable from the device for safety. With the switch removed, no one can activate the laser. The laser comes with a carry case for the removable switch module. Intelligent Laser Driver: Navigate through High, Medium, Low and Extra Low brightness modes with ease. A full click on the tail switch powers on the device, while you can use the forward button to cycle through four brightness levels. Driver Safety Features:Overcurrent Protection: Adjusts power output if battery amperage is insufficient. Undervoltage Protection: Gradually reduces brightness to protect Li-ion cells from damage due to low voltage, signaling with a blinking light before shutting down.Reverse polarity protection: Prevents damage from inserting the battery incorrectly.Battery Power Gauge: The device is equipment with 4 leds that indicate the power level remaining in the batteries in 25% increments. Note that the driver may shut down the laser, or reduce to a lower power mode, before the batteries are completely run out as a safety feature. Adjustable Focus Lens: Customize your beam pattern with an adjustable focus lens. Simply twist the focus bell of the device to focus the beam anywhere from infinity to a tiny spot at a short distance that can be used for engraving/burning. Add a Beam Expander to greatly extend the distance at which the beam can be focused into a dot. A Beam Expander also improves the beam divergence of this laser diode and provides for a smaller dot size at a distance. Laser Lens: High quality 3 element glass lens with AR (Antireflective) coating and brass housing. Size M9x0.5xL10; EFL 11mm; AR coating 400-600nm; SD 8mm; NA 0.45. DTR G8 single element lenses are also available but it is highly recommended that a 3 element lens be used with this laser diode due to it's significant beam divergence. Message the seller upon purchase if you prefer a DTR G8 lens. Battery: One high quality KeepPower 6000mAh 26650 battery is included. These batteries actually test over their rated 6000mAh. Beam Expander Capable: A standard BE (Beam Expander) can be attached to the faceplate without the need for an adapter. For information on what Beam Expanders are, visit laserpointerforms.com. Beam expanders are used in industrial and commercial laser machines to perform specific tasks. The expander simply magnifies the incoming beam so that the output beam is larger/fatter. Beam expanders are available for hobby use in standard 3X and 5X values. A Beam Expander also improves the beam divergence of this laser diode and provides for a smaller dot size at a distance. Message the seller if you are interested in adding a 5X stainless steel BE to your laser purchase. Linos Variable 2X-8X Beam Expander Capable: A Linos BE can be attached to the laser using a custom aluminum adapter. Optional Safety Caps: The safety caps can be mounted on either or both the power switch and the laser output lens. With the safety cap installed over the switch, the button cannot be inadvertently pressed. The safety caps come with a "Remove Before Flight" tag, a lobster claw clip, and wrist strap. Use the wrist strap with lobster claw clip to attach the safety cap(s) when not attached to the laser device and keep them close by. Optional Laser Lens Protection Cap: The LPC (Lens Protection Cap) installs on the laser faceplate and covers the laser lens and therefore protecting the lens from any debris or impact. The window is made from quartz and is specifically for protecting laser lenses. The window and the cap both have high temperature tolerant silicon o-rings installed. Installing the Lens Protection Cap makes the laser device water resistant. Optional Storage Case: A high quality, heavy duty, lockable, padded, storage case is available. Craftsmanship and Passion: With nearly four decades of experience as an Electrical Engineer and a passion for high-performance gadgets, I take pride in creating items that not only shine but endure. My home workshop is my canvas, where I design and build with an eye for both function and aesthetics. As a new seller on eBay, I'm excited to share my creations, allowing me to further my craft and bring new innovations to fellow enthusiasts. Shipping and Warranty: Enjoy FREE shipping nationwide, backed by a 14-day warranty for peace of mind. Returns are hassle-free with free return shipping. For those who need it faster, expedited shipping options are available at an additional cost. Warranty Disclaimer: This product's warranty may be deemed invalid if the Quality Control Seal is found to be tampered with, or if the Internal Moisture Indicators reveal any signs of water exposure. Full refunds are available for returns in the same new condition and with all the same accessories as was sold. Liability Disclaimer: The buyer assumes all responsibility for the operation and ownership of this device. Lumen Works Wicked LasersLumen Works Laser PointerLumen WorksLumen Works Laser PointerLumen Works and Lumen Works Laser Pointer and Tinker Tavern Valkyrie and Tinker Tavern ?The Blue Demon? and Tinker Tavern ?The Green Demon? and Z80 Lasers Barnett and Tinker Tavern Valkyrie and Z80 Lasers Barnett and Tinker Tavern ?The Blue Demon? and Z80 Lasers and Tinker Tavern ?The Green Demon? and Z80 Lasers and Tinker Tavern ?The Blue Demon? and Tinker Tavern ?The Blue Demon? and Wicked Lasers and Wicked Lasers and Wicked Lasers and Nichia NUMB44 and Nichia NUMB44-V2 and Nichia NUMB47 and Nichia NUMB47-V2

Price: 155 USD

Location: Panama City, Florida

End Time: 2024-12-07T01:04:06.000Z

Shipping Cost: N/A USD