Bulldog 10,000 lbs. Square Trailer Jack Sidewind 10" Lift Drop Leg w/ Footplate

Description: Bulldog 10,000 lbs. Square Trailer Jack Sidewind 10" Lift Drop Leg w/ Footplate SQUARE JACKS BULLDOG 10,000 lbs. support capacity square jacks “fills the gap” between 8,000 lbs. and 12,000 lbs. square jack product offerings. If the existing 8,000 lbs. support capacity square jacks are too small or the 12,000 lbs. support capacity square jacks are too big, look no further – your application and pricing requirements have been met! This is the highest quality and best performing jack available in the marketplace today, a total balance between capacity, speed, and effort. Heavy-gauge 3" square tubing allows for direct weld mounting wherever the application allows – no burn through Use the painted outer tube as the final finish or primer Zinc-plated inner tube and drop leg 4.7" Outer / inner tube overlap - results in optimal side load performance Heavy-duty base, with reinforcement ribs, zero water retention Patented screw nut stop - prevents screw and/or nut damage when jack is fully extended Precision manufactured for long term reliability and smooth, easy cranking Grease zerk for easy lubrication as needed Oil-impregnated bushing for improved bearing and gear life Limited 5-year warranty ASABE Compliant Specifications: Support Capacity: 10,000 lbs. Lift Capacity: 7,200 lbs. Retracted Bracket Height: 19.93" Extended Bracket Height: 40.05" Travel/Lift: 10" This Jack is intended to be welded on directly onto your application Drop Leg w/ heavy-duty base (Drop Leg offers 13.50" of additional adjustment) Handle included Handle Radius: 10.5" Sidewind models - 1:1.86 gear ratio 3" Tubing Width PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal and All Major Credit Cards Your order will be dispatched within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it 2 to 5 days after dispatch. We ship via UPS. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 60 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. SQUARE JACKS BULLDOG 10,000 lbs. support capacity square jacks “fills the gap” between 8,000 lbs. and 12,000 lbs. square jack product offerings. If the existing 8,000 lbs. support capacity square jacks are too small or the 12,000 lbs. support capacity square jacks are too big, look no further – your application and pricing requirements have been met! This is the highest quality and best performing jack available in the marketplace today, a total balance between capacity, speed, and effort. Heavy-gauge 3" square tubing allows for direct weld mounting wherever the application allows – no burn through Use the painted outer tube as the final finish or primer Zinc-plated inner tube and drop leg 4.7" Outer / inner tube overlap - results in optimal side load performance Heavy-duty base, with reinforcement ribs, zero water retention Patented screw nut stop - prevents screw and/or nut damage when jack is fully extended Precision manufactured for long term reliability and smooth, easy cranking Grease zerk for easy lubrication as needed Oil-impregnated bushing for improved bearing and gear life Limited 5-year warranty ASABE Compliant Specifications: Support Capacity: 10,000 lbs. Lift Capacity: 7,200 lbs. Retracted Bracket Height: 19.93" Extended Bracket Height: 40.05" Travel/Lift: 10" This Jack is intended to be welded on directly onto your application Drop Leg w/ heavy-duty base (Drop Leg offers 13.50" of additional adjustment) Handle included Handle Radius: 10.5" Sidewind models - 1:1.86 gear ratio 3" Tubing Width Bulldog 10,000 lbs. Square Trailer Jack Sidewind 10" Lift Drop Leg w/ Footplate SQUARE JACKS BULLDOG 10,000 lbs. support capacity square jacks “fills the gap” between 8,000 lbs. and 12,000 lbs. square jack product offerings. If the existing 8,000 lbs. support capacity square jacks are too small or the 12,000 lbs. support capacity square jacks are too big, look no further – your application and pricing requirements have been met! This is the highest quality and best performing jack available in the marketplace today, a total balance between capacity, speed, and effort. Heavy-gauge 3" square tubing allows for direct weld mounting wherever the application allows – no burn through Use the painted outer tube as the final finish or primer Zinc-plated inner tube and drop leg 4.7" Outer / inner tube overlap - results in optimal side load performance Heavy-duty base, with reinforcement ribs, zero water retention Patented screw nut stop - prevents screw and/or nut damage when jack is fully extended Precision manufactured for long term reliability and smooth, easy cranking Grease zerk for easy lubrication as needed Oil-impregnated bushing for improved bearing and gear life Limited 5-year warranty ASABE Compliant Specifications: Support Capacity: 10,000 lbs. Lift Capacity: 7,200 lbs. Retracted Bracket Height: 19.93" Extended Bracket Height: 40.05" Travel/Lift: 10" This Jack is intended to be welded on directly onto your application Drop Leg w/ heavy-duty base (Drop Leg offers 13.50" of additional adjustment) Handle included Handle Radius: 10.5" Sidewind models - 1:1.86 gear ratio 3" Tubing Width Payment We accept payment by any of the following methods: PayPal and All Major Credit Cards Shipping Your order will be dispatched within 1 business day of receiving payment (Monday-Friday) and you should expect to receive it 2 to 5 days after dispatch. We ship via UPS. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 60 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. SQUARE JACKS BULLDOG 10,000 lbs. support capacity square jacks “fills the gap” between 8,000 lbs. and 12,000 lbs. square jack product offerings. If the existing 8,000 lbs. support capacity square jacks are too small or the 12,000 lbs. support capacity square jacks are too big, look no further – your application and pricing requirements have been met! This is the highest quality and best performing jack available in the marketplace today, a total balance between capacity, speed, and effort. Heavy-gauge 3" square tubing allows for direct weld mounting wherever the application allows – no burn through Use the painted outer tube as the final finish or primer Zinc-plated inner tube and drop leg 4.7" Outer / inner tube overlap - results in optimal side load performance Heavy-duty base, with reinforcement ribs, zero water retention Patented screw nut stop - prevents screw and/or nut damage when jack is fully extended Precision manufactured for long term reliability and smooth, easy cranking Grease zerk for easy lubrication as needed Oil-impregnated bushing for improved bearing and gear life Limited 5-year warranty ASABE Compliant Specifications: Support Capacity: 10,000 lbs. Lift Capacity: 7,200 lbs. Retracted Bracket Height: 19.93" Extended Bracket Height: 40.05" Travel/Lift: 10" This Jack is intended to be welded on directly onto your application Drop Leg w/ heavy-duty base (Drop Leg offers 13.50" of additional adjustment) Handle included Handle Radius: 10.5" Sidewind models - 1:1.86 gear ratio 3" Tubing Width

Price: 199.99 USD

Location: Mechanicsburg, Pennsylvania

End Time: 2025-01-13T01:29:21.000Z

Shipping Cost: 0 USD